• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.13-24
• /
• 1988

A geometrically nonlinear analysis procedure for plane frame structures in order to study the static and dynamic post-buckling behavior of these structures subjected to circulatory forces is presented. The elastic and geometric stiffness matrices, the mass matrix and load correction stiffness matrix are derived from the extended virtual work principle, where the tangent stiffness matrix becomes non-symmetric due to the effects of non-conservative circulatory forces. The dynamic analysis of plane frame structures subjected to circulatory forces in pre- and post-buckling ranges is carried out by integrating the equations of motion directly by the numerically stable Newmark method. Numerical results are presented in order to demonstrate the vality and accuracy of the proposed procedure.

• Restorative Dentistry and Endodontics
• /
• v.12 no.1
• /
• pp.119-129
• /
• 1986

The purpose of this study was to evaluate the marginal leakage of glass ionomer cement with different cavosurface margins. 192 class V cavities were prepared on freshly extracted non-carious teeth and glass ionomer cement were inserted according to the manufacturer's instructions. Cavity preparations for this investigation were performed in four groups. The experimental specimens were made by packing the glass ionomer cement (Fuji Ionomer Type II G-C Co. Japan) into the prepared 192 cavities of four groups with different modes: Group I. - The 48 cavities with $90^{\circ}$ butt-joint cavosurface preparation and restored with glass ionomer cement. Group II. - The 48 cavities with butt-joint preparation modified by $135^{\circ}$ beveling the cavosurface in the dentin and restored with glass ionomer cement. Group III. - The 48 cavities with butt-joint preparation modified by cutting a chamfer in the dentin and restored with glass ionomer cement. Group IV. - The same 48 cavities as group I, and overfilled with glass ionomer cement beyond the cavosurface angle. And four groups above described divided into three subgroups by means of conditioning the cavity walls: Control group. - Glass ionomer cement filled in the prepared 64 cavities after being cleaned with a stream of tap water. Phosphoric acid treatment group. - Glass ionomer cement filled in the prepared 64 cavities after being conditioned with a 50% phosphoric acid. Citric acid treatment group. - Glass ionomer cement filled in the prepared 64 cavities after being conditioned with a 50% citric acid. All 192 specimens were immersed in the 2.0% basic fuchsin solution and subjected to thermal stress at one-minute intervals ($4{\pm}2^{\circ}C$ to $60{\pm}2^{\circ}C$) for 70 minutes before exposure to the dye. The specimens were sectioned ecclesiologically through the center of the restorations for different periods of immersion time, 24 hours, 7 days, 14 days 30 days. The sections were examined under a stereoscopic microscope. The results were as follows: 1. The degree of marginal leakage in group II and III was greater than that in group I and IV. 2. The degree of marginal leakage in phosphoric acid treatment group was similar with that in control group. 3. The degree of marginal leakage in citric acid treatment group was less than that in control group. 4. In all groups, the degree of marginal leakage in phosphoric acid treatment group was greater than that in citric acid treatment group. 5. There is no statistical difference of the degree of marginal leakage according to the immersion time in the dye solution.

• Clinics in Shoulder and Elbow
• /
• v.21 no.2
• /
• pp.75-81
• /
• 2018

Background: We investigated the resolution of pain and functional recovery of shoulder after arthroscopic removal of calcific deposits in patients with chronic calcific tendinitis. Methods: We enrolled 39 patients who were treated arthroscopically for chronic calcific tendinitis that had been non-responsive to at least 6 months of conservative treatment. We evaluated clinical outcome in terms of the American Shoulder Elbow Surgeons (ASES), the Constant score, the visual analogue score (VAS) for pain. We used plain radiography to measure the size of the calcific deposits. We also analyzed the clinical outcomes in terms of whether or not a cuff repair was performed or the degree of removal of calcific deposits. Results: We found that complete resolution of pain took on average 5.7 months after the arthroscopic treatment. The ASES and the Constant score significantly improved from the 3-month follow-up, however it took 6 months until the scores reached on average 80 points or above. We found that these clinical outcomes at the final follow-up did not significantly differ by whether or not cuff repair was performed. Similarly, we found that the clinical outcomes did not significantly differ by the degree of calcium removal. Conclusions: We found that arthroscopic removal of calcification leads to improved clinical outcomes in patients with chronic calcific tendinitis. However, our findings show it takes at least 6 months for the clinical improvement to become statistically significant. We also found that concomitant cuff repairs or the degree of removal of calcification does not affect the clinical outcome of the arthroscopic treatment.

• Earthquakes and Structures
• /
• v.12 no.1
• /
• pp.119-133
• /
• 2017

Several theoretical and analytical formulations for the prediction of shear strength in reinforced concrete (RC) beam-to-column joints have been recently developed. Some of these predictive models are included in the most recent seismic codes and currently used in practical design. On the other hand, the influence of the stiffness and strength degradations in RC joints on the seismic performance of RC framed buildings has been only marginally studied, and it is generally neglected in practice-oriented seismic analysis. To investigate such influence, this paper proposes a numerical description for representing the cyclic response of RC exterior joints. This is then used in nonlinear numerical simulations of RC frames subjected to earthquake loading. According to the proposed strategy, RC joints are modelled using nonlinear rotational spring elements with strength and stiffness degradations and limited ductility under cyclic loading. The proposed joint model has been firstly calibrated against the results from experimental tests on 12 RC exterior joints. Subsequently, nonlinear static and dynamic analyses have been carried out on two-, three- and four-storey RC frames, which represent realistic existing structures designed according to old standards. The numerical results confirm that the global seismic response of the analysed RC frames is strongly affected by the hysteretic damage in the beam-to-column joints, which determines the failure mode of the frames. This highlights that neglecting the effects of joints damage may potentially lead to non-conservative seismic assessment of existing RC framed structures.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.4
• /
• pp.307-314
• /
• 2009

The present paper briefly describes the space frame element and the fundamental strategies in computational elastic bifurcation theory of geometrically nonlinear, single load parameter conservative elastic spatial structures. A method for large deformation(rotation) analysis of space frame is based on an eulerian formulation, which takes into consideration the effects of large joint translations and rotations with finite deformation(rotation). The local member force-deformation relationships are based on the beam-column approach, and the change in member chord lengths caused by axial strain and flexural bowing are taken into account. and the derived geometric stiffness matrix is unsymmetric because of the fact that finite rotations are not commutative under addition. To detect the singular point such as bifurcation point, an iterative pin-pointing algorithm is proposed. And the path switching mode for bifurcation path is based on the non-negative eigen-value and it's corresponding eigen-vector. Some numerical examples for bifurcation analysis are carried out for a plane frame, plane circular arch and space dome structures are described.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.27-35
• /
• 2015

The material properties of crack growth models at an elevated temperature were derived from the results of numerous crack growth tests for Mod.9Cr-1Mo (ASME Grade 91) steel specimens under fatigue loading and creep loading at an elevated temperature. These crack growth models were needed for defect assessment under creep-fatigue loading. The mathematical crack growth rate models for fatigue crack growth (FCG) and creep crack growth (CCG) were determined based on the test results, and the models were compared with those of the French design code RCC-MRx to investigate the conservatism of the code. The French design code RCC-MRx provides an FCG model and a CCG model for Grade 91 steel in Section III Tome 6. It was shown that the FCG model of RCC-MRx is conservative, while the CCG model is non-conservative compared with the present test data. Thus, it was shown that further validation of the property was required. Mechanical strength tests and creep tests were also conducted, and the test results were compared with those of RCC-MRx.

• Journal of Korean Foot and Ankle Society
• /
• v.16 no.4
• /
• pp.229-234
• /
• 2012

Purpose: The purpose of this study is to find out clinical and radiological outcomes in 70 patients of both calcaneal fracture. Materials and Methods: From March 1993 to March 2011, 70 patients underwent non-operative management or operative management at our hospital. Conservative management was performed in 15 cases of undisplaced fracture (Group A). Operative management was performed in 125 cases including 32 cases of undisplaced fracture (Group B), 60 cases of joint depression type fracture (Group C), 33 cases of tongue type fracture (Group D). Results were evaluated by VAS score, AOFAS score, circle draw test, Bohler angle (BA), Gissane angle, width & height of calcaneus. Results: VAS scores were 2.0 in group A, 2.0 in group B, 2.2 in group C, 2.7 in group D. AOFAS scores were 90.4 in group A, 91.9 in group B, 72.2 in group C, 79.2 in group D. Circle draw tests were 8.4 cm in group A, 10.1 cm in group B, 7.6 cm in group C, 7.9 cm in group D. Bohler angles (BA) and Gissane angles were $19.1^{\circ}$, $96.7^{\circ}$ in group A, $21.8^{\circ}$, $119.1^{\circ}$ in group B, $26.3^{\circ}$, $121.2^{\circ}$ in group C, $19.7^{\circ}$, $119.7^{\circ}$ in group D. Calcaneal widths and heights were 39.5 mm, 31.6 mm in group A, 32.7 mm, 37.0 mm in group B, 34.4 mm, 39.2 mm in group C, 35.2 mm, 38.7 mm in group D. Conclusion: The main cause of bilateral calcaneal fracture is an injury from a fall, and the cases were more frequently occurred in men than women. Also the fracture in the right side tend to occur more severely compared to the left side. The surgical treatment shows better results than conservative treatment in bilateral calcaneal fracture.

• Journal of Oral Medicine and Pain
• /
• v.38 no.4
• /
• pp.357-366
• /
• 2013

This study is designed to evaluate the treatment outcome of occlusal stabilizing splint and to assess follow-up study of condylar bony changes using cone beam computed tomography(CBCT) in adolescents patients (12-19 years) with TMJ osteoarthritis(OA). 167 eroded condyles in 149 subjects were chosen among the patients who presented to the Department of Oral Medicine of Pasan National University Hospital, diagnosed as TMJ osteoarthritis by clinical exam, x-ray and CBCT from 2009 to 2012. They were treated conservatively with physical therapy, medication, behavioral therapy and occlusal stabilizing splint therapy. After average 9 months, CBCT was retaken and subjective symptoms and clinical findings were investigated. Condyle bony changes were classified by unchanged, less severe and more severe. The obtained results were as follow: 1. Pain, Noise, LOM(Limitation of motion) and MCO(Maximum comfortable opening) measurement of TMJ OA patients were markedly improved after conservative treatment. 2. In the occlusal stabilizing splint therapy group, Pain and LOM were statistically significant improved than non-occlusal stabilizing splint therapy group. 3. In the acute occlusal stabilizing splint therapy group, Pain and LOM were remarkably improved. 4. In comparison of CBCT1 and CBCT2 images, the transition of bone changes to lesser severe was most commonly in joint with erosive change. 5. In the non-occlusal stabilizing splint therapy group, the transition of condylar bone changes from erosion to more severe was many than occlusal stabilizing splint therapy group.

• Clinics in Shoulder and Elbow
• /
• v.15 no.2
• /
• pp.86-90
• /
• 2012

Purpose: We studied the need for distal clavicle resection by comparing rotator cuff tear patients who underwent non-surgical treatment with and without acromioclavicular joint pathology. Materials and Methods: 45 cases that had been under follow up care for at least 9 months after receiving rotator cuff repair in our hospital between Jan. 2005 and Jun. 2011 had been studied. Acromioclavicular joint pathology group and control group were classified by physical examination and MRI findings. The temporal changes in shoulder joint abduction, internal and external rotation strength, ASES and KSS score of the two groups were measured and analyzed. Results: The acromioclavicular joint pathology complicated rotator cuff injury group's strength measurements for abduction, internal rotation, external rotation were each 8.05 (${\pm}4.54$), 11.33 (${\pm}6.05$), 10.24 (${\pm}5.27$) preoperatively and improved to 13.26 (${\pm}5.50$), 17.51 (${\pm}6.80$), 15.60 (${\pm}5.37$) post operatively while the KSS score and ASES score were each 49.07 (${\pm}15.28$) and 48.65 (${\pm}13.27$) preoperatively, improving to 84.48 (${\pm}10.96$) and 84.65. (${\pm}9.86$). The measurements for the group without complicating acromioclavicular pathology are as follows. The strength for abduction, internal rotation, external rotation was each 6.42 (${\pm}3.11$), 7.59 (${\pm}4.81$) and 7.93 (${\pm}4.49$) preoperatively, improving to 15.85 (${\pm}7.35$), 19.18 (${\pm}9.14$), 16.95 (${\pm}5.70$) post operatively, while the KSS score and ASES score each went from 42.12 (${\pm}6.43$) and 41.37 (${\pm}7.42$) to 83.44 (${\pm}6.30$) and 83.17 (${\pm}7.01$) respectively. The measurements for the two groups, however, did not show a statistically significant difference (p>0.05). Conclusion: Analysis of the rotator cuff injury groups with and without AC joint pathology showed that both groups had improved strength, ASES and KSS scores with no statistical difference difference among the groups. As such, it thought that conservative treatment is an acceptable alternative to distal clavicle resection.

• Korean Journal of Labor Studies
• /
• v.24 no.1
• /
• pp.157-196
• /
• 2018

This study analyzes non-standard workers' attitudes and behaviors towards standard workers' strikes using the case of a joint strike held by journalists at KBS and MBC in 2012. Tracing the process since 2008 by which a conservative government has tried to control the press and regular journalists have collectively resisted against it, we put our analytical focus on two major groups of freelance broadcast professionals: independent producers and writers in current affairs. Specifically, we examine 1) how they perceived and responded to a series of regular journalists' struggle to protect journalistic value, 2) how such perception of and response to regular journalists could be developed, and 3) how (de)solidarity could form and then deepened between freelance and regular journalists in the 2012 Media Strike. Our findings show that the ways in which regular journalists had controlled freelance journalists at work affected the relationship between class-based and occupation-based rationality freelance journalists held in their minds. Independent producers, who had developed a strong class-based rationality in response to the coercive input-output control, showed cynicism about regular journalists' strike pointing out their hypocrisy and contradiction. In contrast, freelance writers accommodated and joined the strike by regular workers in the spirit of solidarity based on occupational rationality which had developed from normative, process control. Our paper ends with theoretical and practical implications.