• Steel and Composite Structures
• /
• v.4 no.2
• /
• pp.133-147
• /
• 2004

This paper deals with the asymptotic analysis of Mohr-Coulomb and Drucker-Prager soft thin layers bonded with elastic solids. In the first part, a mathematical analysis shows how to obtain an interface law that replaces mechanically and geometrically the thin layer. This law is strongly non-linear and couples microscopic and macroscopic scales. In the second part of the paper, the microscopic terms are quantified numerically, and it is shown that they can be neglected.

• Geomechanics and Engineering
• /
• v.24 no.4
• /
• pp.307-321
• /
• 2021

In an earlier publication (Serrano et al. 2014), the theoretical basis for evaluating the shear strength in rock joints was presented and used to derive an equation that governs the relationship between tangential and normal stresses on the joint during slippage between the joint faces. In this paper, the theoretical equation is applied to two non-linear failure criteria by using non-associated flow laws, including the modified Hoek and Brown and modified Mohr-Coulomb equations. The theoretical model considers the geometric dilatancy, the instantaneous friction angle, and a parameter that considers joint surface roughness as dependent variables. This model uses a similar equation structure to the empirical law that was proposed by Barton in 1973. However, a good correlation with the empirical values and, therefore, Barton's equation is necessary to incorporate a non-associated flow law that governs breakage processes in rock masses and becomes more significant in highly fractured media, which can be induced in a rock joint. A linear law of dilatancy is used to assess the importance of the non-associated flow to obtain very close values for different roughness states, so the best results are obtained for null material dilatancy, which considers significant changes that correspond to soft rock masses or altered zones of weakness.

• Asia Pacific Journal of Corpus Research
• /
• v.3 no.2
• /
• pp.17-33
• /
• 2022

While the term is nothing new, 'cybersecurity' still seems to be defined quite loosely and subjectively depending on context. This is problematic especially to legal writers for prosecuting cybercrimes that do not fit a particular clause/act. In fact, what is more difficult is the non-existent single 'cybersecurity law' in Malaysia, rather than the current implementation of 10-related cyber security acts. In this paper, the 10 acts are compiled into a corpus to analyse the language used in these acts via a corpus linguistics approach. A list of frequent words is firstly investigated to see whether the so-called related laws do talk about cybersecurity followed by close inspection of the concordance lines and habitually associated phrases (clusters) to explore use of these words in context. The 'compare 2 wordlist' feature is used to identify similarities or differences between the 10 Malaysian cybersecurity related laws against a corpus of cyber laws from other ASEAN countries. Findings revealed that ASEAN cyber laws refer mostly to three cybersecurity dominant themes identified in the literature: technological solutions, events, and strategies, processes, and methods, whereas Malaysian cybersecurity-related laws revolved around themes like human engagement, and referent objects (of security). Although these so-called cyber related policies and laws in Malaysia are highlighted in the National Cyber Security Agency (NACSA), their practical applications to combat cybercrimes remain uncertain.

• Journal of the Korean Regional Science Association
• /
• v.34 no.4
• /
• pp.49-60
• /
• 2018

To restore urban water cycle, it is necessary to improve domestic laws and regulations related to LID(Low Impact Development), which has been successfully applied to foreign countries. Thus, this study has intended to evaluate domestic legal systems related to space and environmental planning and to suggest directions to improve laws and regulations related to space and environmental planning toward extended application of LID in Korea. To reach this goal, this study has analyze the legal and institutional status of the foreign countries where LID has currently been applied, to derive the factors that laws and institutions are required to support LID based on the above analysis, to evaluate domestic laws and regulations related to space and environmental planning, and to suggest directions to improve the laws and regulations. After the evaluation, this study has found the following results. First, it was found that the concept and basic principles of LID and LID planning and associated methods were no longer mirrored in the space planning-related laws and regulations. However, these problems are not confined to LID, and result from thefailurein applying environmental planning to space planning overall. Second, it was revealed that the environmental planning-related laws and regulations defined the terminologies and targets of LID and suggested different measures to improve LID-related policies differently depending on the backgrounds ofenforcing thelaws and regulations and on environmental properties. Finally, this study has suggested the directions to improve laws and regulations related to space and environmental planning as follows. First, it is necessary to enact a law to support the extended application of LID. Second, the law to be enacted should be connected to laws, enforcement ordinances and regulations, and guidelines related to space planning. Third, environmental benefits provided by both structural and non-structural techniques of LID should be quantitatively measured.

• Journal of Mechanical Science and Technology
• /
• v.15 no.10
• /
• pp.1349-1355
• /
• 2001

As most fractures of ductile materials in metal forming processes occurred due to the results of evolution of internal damage - void nucleation, growth and coalescence. In this paper, an approximate yield criterion for voided (porous) anisotropic ductile materials is developed. The proposed approximate yield function is based on Gurson's yield function in conjunction with the Hosford's non-quadratic anisotropic yield criterion in order to consider the characteristic of anisotropic properties of matrix material. The associated flow rules are presented and the laws governing void growth with strain are derided. Using the proposed model void growth of an anisotropic sheet under biaxial tensile loading and its effect on sheet metal formability are investigated. The yield surface of voided anisotropic sheet and void growth with strain are predicted and compared with the experimental results.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.483-490
• /
• 2002

This paper presents the results of a comparative study between FEM and LEM on slope stability analysis. For validation, factors of safety were compared between FEM and LEM. The results from the two methods were in good agreement suggesting that the FEM with the shear strength reduction method can be effectively used on slope stability analyses. A series of analysis were then performed using the FEM for various constitutive laws, slope angles, flow rules, and the finite element discretizations. Among the findings, the finite element method in conjunction with the shear strength reduction method can provide reasonable results in terms of factor of safety. Also revealed is that the results of FEM can be significantly affected by the way in which the type of constitutive law and flow rule are selected.

• Journal of Radiation Protection and Research
• /
• v.41 no.1
• /
• pp.15-29
• /
• 2016

Research background: Despite the visible growth in radiation usage and nuclear power development, the analysis of their relationship with fundamental rights, a subject of public concern regarding issues including the right to health, environmental rights, safety rights, the right to know, the right to development, and the right to life, is currently non-existent. Methods: By examining various fundamental rights in the context of positive laws regarding radiation and nuclear power in an idealistic perspective that guarantees the maximum degree of rights, this paper aims to propose legislative supplements that will lead to improvements in quality of life. Result and discussion: In the South Korean Constitution, radiation and nuclear power is a subject incorporating several rights, including at least 12 clauses that are directly related to fundamental rights; these constitutional rights are manifested in the various clauses of the 14 positive laws regarding radiation and nuclear power. The question on the relative importance of each fundamental right as reflected in these positive laws- whether the right to life should be prioritized or considered equal in weight to the right to health, environmental rights, the right to know, and safety rights- requires careful deliberation and is difficult to humanly resolve in the short term. Conclusion: Making policy that expands the usage of radiation and nuclear power while simultaneously preventing their associated risks is an important task for the Republic of Korea, and a proper value judgment is necessary to find a balance in its associated rights.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.12
• /
• pp.5075-5080
• /
• 2016

Purpose: Factors associated with ever-use and differences between ever-users and non-users of tobacco among adolescent school students from low income families in Mumbai were assessed. Materials and Methods: A self-administered questionnaire, completed by 1918 students from grades 7, 8 and 9 in 12 schools managed by the city municipal corporation in July 2015, gathered data on socio-demographic characteristics, tobacco use and tobacco-related knowledge, attitudes and beliefs. Results: Although only 1% of respondents thought tobacco was cool, nearly 35% were unaware of associations between tobacco use and health problems. Male students were almost twice as likely (OR=2.5, P <= 0.05) to have ever used tobacco compared to females and Supari (areca nut) users were eight times more likely (OR=8.99, P < 0.001) than Supari non -users. Tobacco-users were more likely to agree with statements: 'People who use tobacco have more friends' (OR=2.8, P = 0.004), 'Smoking relieves stress' (OR=5.6, P = 0.002) and 'It is possible to purchase any tobacco product within 100 yards of school' (OR=10.8, P < 0.001). Conclusion: This study highlights the gains made by tobacco prevention campaigns in that almost all students did not consider tobacco as cool or a stress reliever. However, they still need education about health consequences of tobacco-use. In addition, Supari use has to be addressed in school-based tobacco prevention and cessation initiatives. Furthermore, programs must also address perceptions and norms related to peers and tobacco use and ensure active implementation of existing laws. Such integrated measures will help ensure tobacco-free spaces around schools.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.65-74
• /
• 2003

This paper presents the results of a comparative study between FEM and LEM on slope stability analysis. For validation, factors of safety were compared between FEM and LEM. The results from the two methods were in good agreement. This suggests that the FEM with the shear strength reduction method can be effectively used on slope stability analyses. A series of analyses were then performed using the FEM for various constitutive laws, slope angles, flow rules, and the finite element discretizations. Among the findings, the finite element method in conjunction with the shear strength reduction method can provide reasonable results in terms of safety. Also revealed is that the results of FEM can be significantly affected by the way in which the type of constitutive law and flow nile we selected.

• Computers and Concrete
• /
• v.25 no.2
• /
• pp.181-192
• /
• 2020

Nowadays, steel fiber reinforced concretes (SFRCs) are widely used in practical applications. Significant experimental research has thus been carried out to determine the constitutive equations that represent the behavior of SFRCs under multiaxial loadings. However, numerical modelling of SFRCs via FEM has been challenging due to the complexities of the implementation of these constitutive equations. In this study, following the literature, a plasticity model is constructed for the behavior of SFRCs that involves the Willam-Warnke failure surface with the relevant evolution laws and a non-associated flow rule for determining the plastic deformations. For the precise (yet rapid) integration of the constitutive equations, an explicit substepping scheme consisting of yield intersection and drift correction algorithms is employed and thus implemented in ABAQUS via UMAT. The FEM model includes various material parameters that are determined from the experimental data. Three sets of parameters are used in the numerical simulations. While the first set is from the experiments that are conducted in this study on SFRC specimens with various contents of steel fibers, the other two sets are from the experiments reported in the literature. The response of SFRCs under multiaxial compression obtained from various numerical simulations are compared with the experimental data. The good agreement between numerical results and the experimental data indicates that not only the adopted plasticity model represents the behavior of SFRCs very well but also the implemented integration scheme can be employed in practical applications of SFRCs.