• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.545-548
• /
• 1999

The electro-optical characteristics of photo-aligned vertical-alignment (VA)-liquid crystal display (LCD) with non-polarized ultraviolet (UV) light irradiation of 45\`on homeotropic polyimide (Pl) surface were investigated. LC alignment on photo-aligned VA-LCD is attributed to photo-depolymerized reaction of the polymer with non-polarized UV light irradiation on PI surface. We had good voltage-transmittance (V-T) characteristics of photo-aligned VA-LCD. The response time of photo-aligned VA-LCD was slower than that of the rubbing-aligned VA-LCD. Finally, we suggest that the slow response time of photo-aligned VA-LCD depends on the LC domain.

• 인지과학
• /
• 제12권4호
• /
• pp.29-39
• /
• 2001

Kaplan(2000)은 유사성에서 동일하더라도 대응조건의 사례들이 더 정확하게 범주화된다는 결과를 보고하였다. 이 연구는 Kaplan(2000)의 결과가 연구에서 언어자극이 사용되었기 때문인지를 검토하고 대응효과가 속성에 대한 선택적 주의의 결과인지를 밝히고자 하였다[16]. 실험 1에서는 속성간의 대응이 유사성과 범주화에 모두 영향을 미치는지 그리고 대응되어 있는 속성들이 더 잘 기억되는지를 검토하였다. 그 결과에 따르면 공유속성의 수가 동일하더라도 속성이 대응되어 있으면 자극들이 더 유사하게 평정되었고 범주도 더 빠르고 정화하게 학습되었다. 이러한 결과는 속성간의 대응이 범주내 유사성을 높여 범주학습을 용이하게 하였기 때문이라고 해석될 수 있지만 속성회상검사에서 대응되어 있는 속성이 더 많이 회상된 결과를 볼 때 대응효과가 반드시 유사성에 의존한다고 보기 어렵다. 실험 2에서는 대응효과가 속성에 대한 선택적 주의의 결과인지를 살펴보기 위해 대응범주와 비 대응범주를 정의하는 속성의 수를 동일하게 통제하고 범주화에 적절한 속성에만 주의를 기울이도록 지시하였다. 그 결과를 보면 지시조건과 무관하게 비 대응조건보다 대응조건에서 범주가 더 빨리 학습되었지만 비 대응조건에서는 범주화에 적절한 속성에 주의를 기울이도록 지시한 조건에서 범주가 더 빨리 학습되었고 판단시간도 더 빨랐다. 결론적으로 범주화에서 대응은 범주화에 적절한 차원에 선택적 주의를 하는 과정을 촉진하는 것으로 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1385-1387
• /
• 1998

In this paper, we studied the electro-optical(EO) performance of photo-aligned twisted nematic(TN)-liquid crystal display(LCD) with oblique non-polarized ultraviolet (UV) light irradiation on polyimide (PI) surface. The monodomain alignment of photo-aligned TN-LCD is obtained with an angle of incidence of $85^{\circ}$ on PI surface. Also, we observed that the voltage transmittance and response time characteristics of photo-aligned TN-LCD is almost same compared to rubbing treated TN-LCD. Finally, we measured that the voltage-holding-ratio(VHR) of photo-aligned TN-LCD is almost same compared to rubbing treated TN-LCD.

• 대한기계학회논문집A
• /
• 제29권8호
• /
• pp.1070-1077
• /
• 2005

The $40\%$ of wall thickness criterion which has been used as a plugging rule is applicable only to a single cracked steam generator tubes. In the previous studies performed by authors, several failure prediction models were introduced to estimate the plastic collapse pressures of steam generator tubes containing collinear or parallel two adjacent axial through-wall cracks. The objective of this study is to examine the failure prediction models and propose optimum ones for non-aligned two axial through-wall cracks in steam generator tubes. In order to determine the optimum ones, a series of plastic collapse tests and finite element analyses were carried out for steam generator tubes with two machined non-aligned axial through-wall cracks. Thereby, either the plastic zone contact model or COD based model was selected as the optimum one according to axial distance between two clacks. Finally, the optimum failure prediction model was used to demonstrate the conservatism of flaw characterization rules for various multiple flaws according to ASME code.

• Advances in nano research
• /
• 제2권4호
• /
• pp.219-225
• /
• 2014

A simple preparation method on creating superhydrophobic surface using non-aligned carbon nanotubes (CNTs) was demonstrated. Superhydrophobic CNT thin films were prepared by doping a sonicated mixture of CNTs and chloroform onto a glass slide. Water contact angles of the CNT thin films were measured using a contact angle goniometer. The thin films were characterized using laser microscope and scanning electron microscope. Experimental results revealed that the highest average contact angle of $162{\pm}2^{\circ}$ was achieved when the films' thickness was $1.628{\mu}m$. The superhydrophobic surface was stable as the contact angle only receded from $162{\pm}2$ to $157{\pm}2^{\circ}$ after 10 min under normal atmospheric condition.

• 제어로봇시스템학회논문지
• /
• 제15권11호
• /
• pp.1122-1129
• /
• 2009

Recently taping robot with smart recognition function have been studied in the coil manufacturing field. Due to the difficulty of 3D surface processing from the complicated working environment, it is not easy to accomplish smart tape attachment motion with non-contact sensor. To solve these problems the applicable surface recognition algorithm and a flexible sensing device has been recommended. In this research, the fusion method between 1D displacement and 3D laser scanner is applied for robust tape attachment about cold rolled coil. With these sensors we develop a two-step exploration and the smart algorithm for the awareness of non-aligned coil's information. In the proposed robot system for tape attachment, the problem is reduced to coil's radius searching with laser displacement sensor at first, and then position and orientation detection with 3D laser scanner. To get the movement at the robot's base frame, the hand-eye compensation between robot's end effector and sensing device should be also carried out respectively. In this paper, we examine the auto-coordinate transformation method in the calibration step for the real environment usage. From the experimental results, it was shown that the taping motion of robot had a robust under the non-aligned cold rolled coil.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.113-116
• /
• 1998

In this paper, we studied the electro-optical(EO) performance of photo-aligned twisted nematic(TN)-liquid crystal display(LCD) with oblique non-polarized ultraviolet(UV) light irradiation on polyimide(Pl) surface. We observed that the voltage-transmittance and response time characteristics of photo-aligned TN-LCD is almost same compared to conventional TN-LCD. Also, we observed that the voltage-holding-ratio(VHR) of photo-aligned TN-LCD is almost same compared to conventional TN-LCD.

• 전기학회논문지P
• /
• 제62권4호
• /
• pp.223-226
• /
• 2013

In this study, we investigated the electro-optical(EO) characteristic of fringe-field switching(FFS) mode cell by the two kinds of ultraviolet(UV) alignment method on the organic thin film(polyimide: PI). The suitable organic layersfor FFS cell and the aligning capabilities of nematic liquid crystal(NLC) using the in-situ photoalignment method were studied Disclination is observed after conventional photoalignment method for 1h, and in-situ photoalignment method for 1h. Monodomain alignment of the NLC can be observed via in-situ photoalignment method for 2h and 3h. It is considered that NLC alignment is due to photo-depolymerization of the polymer with oblique non-polarized UV irradiation on PI surface. An unstable V-T curve of UV-aligned FFS-LCD with conventional photoalignment method can be achieved. However, a stable V-T curve of UV-aligned FFS-LCD with in-situ photoalignment method(1h), and V-T curve of UV-aligned FFS-LCD with in-situphotoalignment method was much stable comparing with that of other UV-aligned FFS-LCD's. As a result, more stable EO performanceof UV-aligned FFS-LCD with in-situphotoalignment method for 3h is obtained than that of the other UV-aligned FFS-LCD's.

• 전자공학회논문지A
• /
• 제32A권5호
• /
• pp.54-59
• /
• 1995

We have proposed a novel self-aligned offset gated polysilicon TFTs device without an offset mask in order to reduce a leakage current and suppress a kink effect. The photolithographic process steps of the new TFTs device are identical to those of conventional non-offset structure TFTs and an additional mask to fabricate an offset structure is not required in our device due to the self-aligned process. The new device has demonstrated a lower leakage current and a better ON/OFF current ratio compared with the conventional non-offset device. The new TFT device also exhibits a considerable reduction of the kink effect because a very thin film TFT devices may be easily fabricated due to the elimination of contact over-etch problem.

• Archives of Plastic Surgery
• /
• 제46권5호
• /
• pp.399-404
• /
• 2019

Background The objectives of this study were to design polycaprolactone nanofibers with a radial pattern using a modified electrospinning method and to evaluate the effect of radial nanofiber deposition on mechanical and biological properties compared to non-patterned samples. Methods Radially patterned polycaprolactone nanofibers were prepared with a modified electrospinning method and compared with randomly deposited nanofibers. The surface morphology of samples was observed under scanning electron microscopy (SEM). The tensile properties of nanofibrous mats were measured using a tabletop uniaxial testing machine. Fluorescence-stained human bone marrow stem cells were placed along the perimeter of the radially patterned and randomly deposited. Their migration toward the center was observed on days 1, 4, and 7, and quantitatively measured using ImageJ software. Results Overall, there were no statistically significant differences in mechanical properties between the two types of polycaprolactone nanofibrous mats. SEM images of the obtained samples suggested that the directionality of the nanofibers was toward the central area, regardless of where the nanofibers were located throughout the entire sample. Florescence images showed stronger fluorescence inside the circle in radially aligned nanofibers, with significant differences on days 4 and 7, indicating that migration was quicker along radially aligned nanofibers than along randomly deposited nanofibers. Conclusions In this study, we successfully used modified electrospinning to fabricate radially aligned nanofibers with similar mechanical properties to those of conventional randomly aligned nanofibers. In addition, we observed faster migration along radially aligned nanofibers than along randomly deposited nanofibers. Collectively, the radially aligned nanofibers may have the potential for tissue regeneration in combination with stem cells.