• 한국임상수의학회지
• /
• 제33권5호
• /
• pp.266-269
• /
• 2016

Cell-free fetal RNA is useful to determine fetal sex and detect other inherent genetic disorders. However, non-invasive fetal sex determination methods using fetal RNA from maternal plasma is not yet well established in studies pertaining to bovine animals. Thus, the aim of this study was to systematically evaluate the presence of the male-specific ZRSR2Y gene transcript in maternal plasma using Reverse Transcriptase-Polymerase Chain Reaction (RT-PCR) assays, and to verify its accuracy, sensitivity, and specificity in determining fetal sex between 30 and 100 days of gestation. Overall accuracy, sensitivity, and specificity of the ZRSR2Y gene transcripts in determining fetal sex were 89.1%, 86.3%, and 100%, respectively. The 30 to 100 days of gestation were further classified into five stages of gestation, and each stage had relatively high accurate, sensitive, and specific results. Overall, these results indicate that the expression of the ZRSR2Y gene can be used for fetal sex determination in bovine animals using circulating cell-free RNA in maternal plasma during early pregnancy.

• 한국축산식품학회지
• /
• 제43권4호
• /
• pp.553-562
• /
• 2023

With an increase in meat consumption, the need to measure the weight of each primal cut of pork has increased. Recently, automation devices have been used to measure the weight of each primal cut of pork. The objective of this study was to investigate the accuracy of VCS2000, one of the non-invasive pig carcass analyzers. Production levels of 7 primal cuts of 50 pigs were measured with VCS2000. Average error rates between dissected value for each primal cut and VCS2000 measurement values of ham, shoulder picnic, belly, loin, and shoulder blade were around 5%. Average error rates for spare rib and tenderloin were about 10%. Correlation coefficients between the dissected value and the VCS2000 measured value for ham, shoulder picnic, loin, belly, and shoulder blade were high at 0.66-0.83. Correlation coefficients of spare rib and tenderloin were low at 0.35 and 0.47. Coefficient of determination of the VCS2000 measured value for each primal cut by regression analysis was 0.77 or more for ham, shoulder picnic, loin, and shoulder blade and 0.63 for belly. Coefficients of determination for spare rib and tenderloin were low at 0.40 and 0.27. In addition, the coefficient of determination of VCS2000 for each primal cut was higher than that of the dissected value for all primal cuts. In conclusion, pig carcass analysis using the VCS2000 has a high reliability for pork cuts with high production levels, but a relatively low reliability for pork cuts with low production levels and high fat levels.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권6호
• /
• pp.331-334
• /
• 2002

Culture conductivity and on-line NADH fluorescence were used to measure cellular growth in plant cell suspension cultures of Podophyllum hexandrum. An inverse correlation between dry cell weight and medium conductivity was observed during shake flask cultivation. A linear relationship between dry cell weight and culture NADH fluorescence was obtained during the exponential phase of batch cultivation In a bioreactor under the pH stat (pH 6) conditions. It was observed that conductivity measurement were suitable for biomass characterisation under highly dynamic uncontrolled shake flask cultivation conditions. However, if the acid/alkali feeding is done for pH control the conductivity measurement could not be applied. On the other hand the NADH fluorescence measurement allowed online-in situ biomass monitoring of rather heterogenous plant cell suspension cultures in bioreactor even under the most desirable pH stat conditions.

• 대한화장품학회지
• /
• 제41권4호
• /
• pp.413-420
• /
• 2015

피부는 신체에서 가장 크고 육중한 기관 중 하나로 인간의 생리 및 병리 과정에 참여한다. 피부는 자기 유지 및 치유, 기계적 및 화학적 손상 방어, 자외선 과 외부 병원성 미생물로부터의 방어, 비타민 D 합성 그리고 사회 심리적 기능을 한다고 알려져 있다. 이 연구의 목적은 한국 여성의 부위와 연령에 따라 피부 생물학 인자와 연관된 생물리학 인자의 변화를 평가하는 데 있다. 20 ~ 49세의 약 70명의 건강한 성인 여성이 이 실험에 참여하였다. 측정부위는 하박 내측과 뺨으로 진행하였다. 인체 피부의 생물리학 인자를 측정하기 위하여 여러 가지 비침습적인 방법으로 진행하였다. 피부의 생물학 인자를 분석하기 위하여 코티졸, 파이브로넥틴, 케라틴-1, 10, 11, 인보루크린, 케라틴 6를 인체의 얼굴과 하박내측으로 비교하였다. 또한 비침습적 방법으로 피부 생물리학 인자는 피부 부위와 연령에 따른 차이를 측정하였다. 측정 부위에 따른 결과, 각질층 수분량, 경피수분손실량과 피부색(L과 a값)은 유의적인 차이가 나타났다. 연령에 따른 결과, 오직 피부색에서만 연령에 따른 차이가 유의적으로 나타났다. 코티졸, 케라틴-6, 파이브로넥틴, 케라틴-1, 10, 11 은 연령과 부위간 유의적 차이가 없지만 인볼루크린은 30 ~ 39세 연령대에서 다른 연령대보다 유의적으로 가장 높았다. 이러한 결과는 개인의 피부 환경에 대한 상세한 피부 상태 변화로 설명할 수 있을 것이다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권6호
• /
• pp.3843-3846
• /
• 2013

Objective: The purpose of this study was to assess prognosis after resection of giant tumors (including lobectomy or pneumonectomy) in the mediastinum. Materials and Methods: Patients with resection of a giant tumor in the mediastinum of the thoracic cavity received ICU treatment including dynamic monitoring of vital signs, arterial blood pressure and CVP detection, determination of hemorrhage, pulmonary function and blood gas assay, treatment of relevant complications, examination and treatment with fiber optic bronchoscopy, transfusion and hemostasis as well as postoperative removal of ventilators by invasive and non-invasive sequential mechanical ventilation technologies. Results: Six patients were rehabilitated successfully after ICU treatment with controlled postoperative errhysis and pulmonary infection by examination and treatment with fiber optic bronchoscopy without second application of ventilators and tubes after sequential mechanical ventilation technology. One patient died from multiple organ failure under ICU treatment due to postoperative active hemorrhage after second operative hemostasis. Conclusions: During peri-operative period of resection of giant tumor (including lobectomy or pneumonectomy) in mediastinum ofthe thoracic cavity, the ICU plays an important role in dynamic monitoring of vital signs, treatment of postoperative stress state, postoperative hemostasis and successful removal of ventilators after sequential mechanical ventilation.

• Near Infrared Analysis
• /
• 제2권1호
• /
• pp.43-53
• /
• 2001

A non-invasive spectroscopic method is presented for the measurement of pulmonary edema. Both early diagnosis and quantitative edema estimates were investigated. The spectroscopic determination of pulmonary edema involved the acquisition of diffuse reflectance spectra in the near-infrared (NIR) region with change in water concentration - water is the main constituent of edema fluid. Pulmonary edema was induced into the excised perfused lungs of seven animals by elevating the hydrostatic pressure. Estimates of edema were ascertained from a partial least squares regression of the measured spectral response. Actual edema was determined from the change (increase) in total lung weight. Estimates in relative lung weight increases due to in vitro edema were made with the near infrared spectra. The results revealed that fluid accumulation produced spectral changes in the O-H and C-H absorptions as well as scattering changes in the spectra. Histology of the lung was used to verify the presence or absence of interstitial and alveolar edema. Results demonstrated that near infrared spectroscopy might provide a new tool for clinical assessment of pulmonary edema.

• 전기학회논문지
• /
• 제60권4호
• /
• pp.877-879
• /
• 2011

Bowel sounds (BS) are produced by the movement of the intestinal contents in the lumen of the gastro-intestinal tract during peristalsis and thus, it can be used clinically as useful indicators of bowel motility. We devised an estimation algorithm of bowel motility based on the regression modeling of the jitter and shimmer of BS signals measured by auscultation. Ten healthy males ($23.5\pm2.1$ years) were examined. Consequently, the correlation coefficient, coefficient of determination and standard error between the colon transit times (CTT) measured by a conventional radiograph and the values estimated by our algorithm were 0.98, 0.96 and 2.86, respectively. Also, through k-fold cross validation, the average value of the absolute differences between them was $5.0\pm2.5$ hours. This method could be used as a complementary tool for the non-invasive measurement of bowel motility.

• Geomechanics and Engineering
• /
• 제13권5호
• /
• pp.775-791
• /
• 2017

Surface wave techniques are widely used as non-invasive method for geotechnical site characterization. Field surface wave data are collected and analyzed using different processing techniques to generate the dispersion curves, which are further used to extract the shear wave velocity profile by inverse problem solution. Characteristics of a dispersion curve depend on the subsurface layering information of a vertically heterogeneous medium. Sometimes soft layer can be found between two stiff layers in the vertically heterogeneous media, and it can affect the wave propagation dramatically. Now most of the surface wave techniques use the fundamental mode Rayleigh wave propagation during the inversion, but this may not be the actual scenario when a soft layer is present in a vertically layered medium. This paper presents a detailed and comprehensive study using finite element method to examine the effect of soft layers which sometimes get trapped between two high velocity layers. Determination of the presence of a soft layer is quite important for proper mechanical characterization of a soil deposit. Present analysis shows that the thickness and position of the trapped soft layer highly influence the dispersion of Rayleigh waves while the higher modes also contribute in the resulting wave propagation.

• Korean Journal of Radiology
• /
• 제22권5호
• /
• pp.697-705
• /
• 2021

Objective: To investigate the feasibility and the accuracy of the coronary CT angiography (CCTA)-derived Registry of Crossboss and Hybrid procedures in France, the Netherlands, Belgium and United Kingdom (RECHARGE) score (RECHARGECCTA) for the prediction of procedural success and 30-minutes guidewire crossing in percutaneous coronary intervention (PCI) for chronic total occlusion (CTO). Materials and Methods: One hundred and twenty-four consecutive patients (mean age, 54 years; 79% male) with 131 CTO lesions who underwent CCTA before catheter angiography (CA) with CTO-PCI were retrospectively enrolled in this study. The RECHARGECCTA scores were calculated and compared with RECHARGECA and other CTA-based prediction scores, including Multicenter CTO Registry of Japan (J-CTO), CT Registry of CTO Revascularisation (CT-RECTOR), and Korean Multicenter CTO CT Registry (KCCT) scores. Results: The procedural success rate of the CTO-PCI procedures was 72%, and 61% of cases achieved the 30-minutes wire crossing. No significant difference was observed between the RECHARGECCTA score and the RECHARGECA score for procedural success (median 2 vs. median 2, p = 0.084). However, the RECHARGECCTA score was higher than the RECHARGECA score for the 30-minutes wire crossing (median 2 vs. median 1.5, p = 0.001). The areas under the curve (AUCs) of the RECHARGECCTA and RECHARGECA scores for predicting procedural success showed no statistical significance (0.718 vs. 0.757, p = 0.655). The sensitivity, specificity, positive predictive value, and the negative predictive value of the RECHARGECCTA scores of ≤ 2 for predictive procedural success were 78%, 60%, 43%, and 87%, respectively. The RECHARGECCTA score showed a discriminative performance that was comparable to those of the other CTA-based prediction scores (AUC = 0.718 vs. 0.665-0.717, all p > 0.05). Conclusion: The non-invasive RECHARGECCTA score performs better than the invasive determination for the prediction of the 30-minutes wire crossing of CTO-PCI. However, the RECHARGECCTA score may not replace other CTA-based prediction scores for predicting CTO-PCI success.

• 콘크리트학회논문집
• /
• 제21권2호
• /
• pp.153-158
• /
• 2009

콘크리트 표면에 4개의 전극배열을 이용한 비파괴 표면측정법을 통하여 철근의 피복을 벗겨내지 않고도 콘크리트 내 철근의 부식상태 및 철근의 배치상태를 추정할 수 있다. 표면측정법 모델링은 부식된 철근과 주위 콘크리트사이의 계면 임피던스가 콘크리트 표면에서 측정된 임피던스와 어떤 관련이 있는지를 보여준다. 본 연구에서는 콘크리트에 매립된 철근 크기와 콘크리트 피복두께 등의 탐지를 위하여 철근부식 표면측정 모델링을 이용하였다. 모델링 결과 철근 크기가 D10에서 D35로 커짐에 따라 표면임피던스 변화가 나타났으며, 또한 콘크리트 피복두께가 0.02 m에서 0.1 m로 커짐에 따라 그 변화에 대한 영향이 표면측정 임피던스를 통해 나타났다. 그러므로 표면측정법 모델링을 통하여 콘크리트 내 철근부식반응을 시뮬레이션 할 수 있으며, 동시에 철근직경과 매입 깊이 등에 대한 정보도 얻을 수 있음 알 수 있다.