• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.45-49
• /
• 2007

We have investigated the optimum combination of the environmental noise condition and type of SQUID pickup coil in order to obtain maximum signal-to-noise ratio (SNR). The measurement probe consists of 1st order gradiometer with pickup coils of 100 mm, 70 mm, and 50 mm baseline length, a 2nd order gradiometer with 50 mm baseline, and a magnetometer. The pickup coils are fabricated by winding Nb wire on a bobbin with 200 mm diameter. Noise and heart signal of a healthy male were measured by various SQUID sensors with different types of pickup coils in various magnetically shielded rooms (MSR), and compared to each other. The shielding factors were found to be 43 dB, 35 dB and 25 dB at 0.1 Hz for MSR-AS, MSR-BS, MSR-CS, respectively. White noises were $3.5\;fT/Hz^{1/2}$, $4.5\;fT/Hz^{1/2}$ and $3\;fT/Hz^{1/2}$ for the 1st order gradiometers, the 2nd order gradiometers, and magnetometer for all MSRs. SNR of the magnetometer was up to 56 dB in MSR-AS, while the 1st order axial gradiometer with 70 mm baseline length was up to 54 dB in MSR-BS. The 2nd order axial gradiometer with 50 mm baseline length of pickup coil was found to be up to 40 dB in MSR-CS.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1062-1073
• /
• 2007

Acoustic Target Strength (TS) is a major parameter of the active sonar equation, which indicates the ratio of the radiated intensity from the source to the re-radiated intensity by a target. In developing a TS equation, it is assumed that the radiated pressure is known and the re-radiated intensity is unknown. This research provides a TS equation for polygonal plates, which is applicable to near field acoustics. In this research, Helmholtz-Kirchhoff formula is used as the primary equation for solving the re-radiated pressure field; the primary equation contains a surface (double) integral representation. The double integral representation can be reduced to a closed form, which involves only a line (single) integral representation of the boundary of the surface area by applying Stoke's theorem. Use of such line integral representations can reduce the cost of numerical calculation. Also Kirchhoff approximation is used to solve the surface values such as pressure and particle velocity. Finally, a generalized definition of Sonar Cross Section (SCS) that is applicable to near field is suggested. The TS equation for polygonal plates in near field is developed using the three prescribed statements; the redection to line integral representation, Kirchhoff approximation and a generalized definition of SCS. The equation developed in this research is applicable to near field, and therefore, no approximations are allowed except the Kirchhoff approximation. However, examinations with various types of models for reliability show that the equation has good performance in its applications. To analyze a general shape of model, a submarine type model was selected and successfully analyzed.

• Phonetics and Speech Sciences
• /
• 제7권1호
• /
• pp.27-37
• /
• 2015

This study was mainly aimed at investigating on the effects of background noises (i.e., white noise, multi-speaker conversational babble) on stuttering rate and other speech-related measures (i.e., articulation rate, speech effort). Nine Korean-speaking adults who stutter participated in the study. Each of the participants was asked to read a series of passages under each of four experimental conditions (i.e., typical solo reading (TR), choral reading (CR), reading under white noise presented (WR), reading with multi-speaker conversational babble presented (BR). Stuttering rate was computed based on a percentage of syllables stuttered (%SS) and articulation rate was also assessed as another speech-related measure under each of the experimental conditions. To examine the amount of physical effort needed to read, the speech effort was measured by using the 9-point Speech Effort Self Rating Scale originally employed by Ingham et al. (2006). Study results showed that there were no significant differences among each of the passage reading conditions in terms of stuttering rate, articulation rate, and speech effort. In conclusion, it can be argued that the two different types of background noises (i.e., white noise and multi-speaker conversational babble) are not different in the extent to which each of them enhances fluency of adults who stutter. Self ratings of speech effort may be also useful in measuring speech-related variables associated with vocal changes induced under each of the fluency enhancing conditions.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제44권4호
• /
• pp.32-42
• /
• 2007

The substrate resistance is modeled to estimate the performance degradation of analog circuits by substrate noise in a $0.35{\mu}m$ twin-well non-epitaxial CMOS process. The substrate resistance model equations are applied to the P+ guard-ring isolation structure and a good match was achieved between measurements and models. The substrate resistance is divided into four types and a semi-empirical model equation is obtained for each type of substrate resistance. The rms(root-mean-square) error of the substrate resistance model is below 10% compared with the measured resistance. To apply this substrate resistance model to the P+ guard ring structure, ADS(Advanced Design System) circuit simulation results are compared with the measurement results using Network Analyzer, and relatively good agreements are obtained between measurements and simulations.

• International Journal of Highway Engineering
• /
• 제12권2호
• /
• pp.81-90
• /
• 2010

This paper describes the results of laboratory and field performance tests on the polymer modified asphalt binder and mixtures developed in this study for porous asphalt pavements. Various physical and mechanical laboratory tests including DSR and BBR tests are performed for two types of modified binders, and one type of binder is selected based on the binder testing results. Mix designs are conducted for the selected asphalt binder and a Japanese modified binder, respectively. Various performance tests including fatigue tests, wheel tracking tests, and moisture susceptibility tests are conducted for the domestic and Japanese porous asphalt mixtures. Test results indicate that the overall performance characteristics of the domestic mixture are similar to or better than those of the Japanese mixture. Based on the laboratory testing results, the domestic porous mixture is applied to a field test section. Periodic field investigations are conducted to evaluate the changes in noise level and air voids with time. The road noise analysis shows that the noise levels of the porous pavement keep increasing and, after two years, are similar to those of SMA pavements.

• Journal of Broadcast Engineering
• /
• 제10권2호
• /
• pp.221-237
• /
• 2005

This paper presents and analyzes field test results of Equalization Digital On-Channel Repeater (EDOCR) using ATSC(Advanced Television Systems Committee) terrestrial digital TV broadcasting system. In the field test, according to EDOCR On/Off, types of antennas and receivers we measured reception possibility, C/N(Carrier to Noise Ratio), reception power, noise and input margin at each test point. By the field test results, the reception rate of the receiver manufactured in 2004 was $33\%$ when EDOCR is off and directional antenna is used. However, the reception rate was $100\%$ when EDOCR is on. In addition, the noise margin, which determines reception quality was increased at least 6 dB, so that it is capable of constructing SFN(Single Frequency Network) using the EDOCR.

• The Journal of the Acoustical Society of Korea
• /
• 제7권2호
• /
• pp.26-38
• /
• 1988

This paper describes three methods for the estimation of the impulse reponse in an indoor acoustic transfer system which rather has long reverberation time by the cross spectrum. The first method, which is the conventional one, will use the white noise as the source signal. Therefore, the very long time window data and numerous number of DFT are necessary for this estimation. The second method has been disigned in order to shorten the length of time window of the first method by using a burst of noise as the source signal. The third method which will be suggested in this paper uses too types of definite signal with short duration time of the source signal. According to the view point of computation capacity, and estimation accuracy of the impulse response, the compared experimental results show that the third method will be better than the others.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제9권5호
• /
• pp.543-548
• /
• 2014

Multiple-model based speech recognition framework (MMSR) has been known to be very successful in speech recognition. Since it uses multiple hidden Markov modes (HMMs) that corresponds to various noise types and signal-to-noise ratio (SNR) values, the selected acoustic model can have a close match with the test noisy speech. However, since the number of HMM sets is limited in practical use, the acoustic mismatch still remains as a problem. In this study, we experimentally determined the optimal SNR mapping between the test noisy speech and the HMM set to mitigate the mismatch between them. Improved performance was obtained by employing the SNR mapping instead of using the estimated SNR from the test noisy speech. When we applied the proposed method to the MMSR, the experimental results on the Aurora 2 database show that the relative word error rate reduction of 6.3% and 9.4% was achieved compared to a conventional MMSR and multi-condition training (MTR), respectively.

• Elastomers and Composites
• /
• 제49권2호
• /
• pp.95-102
• /
• 2014

The noise between floors of apartment has been hot issue nowadays. In order to improve the noise insulation performance, we proposed the antivibration rubber system which can be applied to the floor system for sound insulation. Among various types of elastomer, butyl rubber showed the good aging characteristic, low rebound resilience and high damping factor. Thus, the butyl rubber was selected as a basic rubber for antivibration rubber system. The effects of type and loading amounts of carbon black on antivibration properties of butyl rubber were studied. The increase of surface area and the content of carbon black resulted in high bound rubber fraction, high mechanical property, low rebound resilience, and high damping factor of butyl rubber. Based on the results of this study, the new antivibration rubber was prepared and applied to the floor system for sound insulation. The impact sounds of floor system proposed in this study were 40 dB and 43 dB in cases of light weight and heavy weight impact sound, respectively.

• The Journal of the Acoustical Society of Korea
• /
• 제38권1호
• /
• pp.51-55
• /
• 2019

This paper proposes a speech enhancement method utilizing the feature compensation gain for robust speech recognition performances in noisy environments. In this paper we propose a speech enhancement method utilizing the feature compensation gain which is obtained from the PCGMM (Parallel Combined Gaussian Mixture Model)-based feature compensation method employing variational model composition. The experimental results show that the proposed method significantly outperforms the conventional front-end algorithms and our previous research over various background noise types and SNR (Signal to Noise Ratio) conditions in mismatched ASR (Automatic Speech Recognition) system condition. The computation complexity is significantly reduced by employing the noise model selection technique with maintaining the speech recognition performance at a similar level.