• 소음진동
• /
• 제4권3호
• /
• pp.295-305
• /
• 1994

The reflection coefficient of a material at oblique incidence is measured in a free field. The sound pressure distributions are measured at discrete points on two measurement lines and then decomposed into plane wave components by using spatial Fourier transform. The inciedent and reflected plane wave components are obtained from a set of "decomposition equations" of which uses the plane wave propagation theory. Numerical simulations and experiments have been performed to see the effect of finite size of measurement area. To reduce this effect, a window fuction has been performed to see the effects of finite size of mesurement area. To reduce this effect, a window function has been proposed and its effect on the measurement of sound absorbing material property has been studied as well. The reflection coefficient obtained by this method is compared with those obtained from other methods; 2-microphone method in a duct and an expirical equation of which determines the characteristic impedance .rho.c and propagation constant k of a material from flow resistance information.formation.

• 소음진동
• /
• 제6권6호
• /
• pp.709-715
• /
• 1996

In recent years, the piping vibration in many Power Plants is being increased by the aged generating facilities due to a long time use. Generally, the pressure fluctuations associated with the flow-induced excitations in this case are broadband in nature. Mainly, the dominant sources of vibration are a vortex-shedding, plane waves and boundary layer turbulence. The peak level of the spectrum is proportional to the dynamic head. A severe disturbance in pipeline results in the generation of intense broadband internal sound waves which can propagate through the piping system. The characteristic frequencies of operating loads of 20%, 57%, 70%, 100% are 4 - 6 Hz and coincide with the results from impact hammering test and FEM analysis. We chose the wire energy absorbing rope restraint as a vibration reduction method after reviewing the various conditions such as site, installing space and economic cost etc. After installation, the vibration level was reduced about 54% in velocity.

• 동력기계공학회지
• /
• 제12권6호
• /
• pp.78-82
• /
• 2008

Plastic gears are more and more widely used in many industrial machine elements. Plastic gear has higher properties such as light weight, wear resistance, and vibration absorbing ability than metallic gears. But, in case of using an inaccurate plastic gear, its tooth breakage happen and fatigue life is shortened due to increase of applying load and temperature rising on the tooth flank. Inaccuracy of plastic gears such as pitch circle roundness and tooth profile generates vibration and noise. In this study, an internal plastic gears which is molded by a new injection mold structure are developed. The new mold structure is called the HR3P(hot runner type 3plate mold) that has an improved runner system in order to have good filling balance. As a result from this study, an internal gear with very accurate roundness was developed by using design of experiment.

• 한국전자파학회지:전자파기술
• /
• 제14권1호
• /
• pp.81-88
• /
• 2003

CISPR has published the limits on the noises emitting from power lines and signal lines. But different measurement environment and measurement methods are used in every countries. This difference causes much confusion in understanding the results measured by different test laboratories. In this paper, we measure EMI noise using the absorbing clamp method that takes short measurement time and is described in CISPR 13, 14-1, 16-2. We analyze the cause of the difference of measurement results and propose the method for improving the uncertainty

• 소음진동
• /
• 제9권6호
• /
• pp.1218-1226
• /
• 1999

In this paper, the extended Biot's semilinear model was developed. Combining the extended Biot model with the dynamic equation yields the nonlinear wave equation in poproelastic sound absorbing materials. Both perturbation and matching techniques are used to find solutions for nonlinear wave equations. By comparing results between linear and nonlinear wave solutions, characteristics of nonlinear waves in poroelastic sound abosrbing materials have been studied. Nonlinear waves were found to be attenuated faster than the linear ones. A maximum amplitude of the nonlinear wave occurred near its surface boundaries and decay quickly with distance from the surface. It has also been found that, if the amplitudes of linear waves are known at the surface boundaries, those of nonlinear ones can be determined. This will be the basis of finding effects of nonlinearity on the absorption coefficient and the transmission loss.

• 한국금형공학회:학술대회논문집
• /
• 한국금형공학회 2008년도 하계 학술대회
• /
• pp.129-133
• /
• 2008

As a rotating machine element, plastic gears are more and more widely used in such as industrial machine element, since plastic gear is lighter, higher wear-resistance, and higher vibration absorbing ability than metal gears. When operating plastic parts, tooth breakage and fatigue life shortened due to increasing number of applying load and tooth flank temperature rising, such that accuracy of plastic gears is divided from allowable range to cause vibration and noise. On this study, a internal plastic gears are developed which improved the filling balance molding process by a new injection mold structure. The new mold structure called HR3P(hot runner type 3plate mold). As the result from this studies, we obtained a very accurate roundness internal gears by using design of experiment.

• 설비공학논문집
• /
• 제28권6호
• /
• pp.224-231
• /
• 2016

When aiming to reduce the low frequency noise of a subway guest room through sound absorbing treatment methods inside the wall of a tunnel the resonator is often more effective than a porous sound absorbing material. Therefore, the perforated panel type resonator embedded with a perforated panel is proposed. The perforated panel is installed in the neck, which is then extended into the resonator cavity so that it can ensure useful volume. The absorption performance of the perforated panel type of resonator is obtained by acoustic analysis and experiment. The analytical results are in good agreement with the experimental results. In the case of multiple perforated panel type resonators, as the number of perforated panels increase, the 1st resonance frequency is moved to a low frequency band and sound absorption bandwidth is extended on the whole. In order to obtain excellent absorption performance, the impedance matching between multi-panels should be considered. When the perforated panel in the resonator is combined with a porous material, the absorption performance is highly enhanced in the anti-resonance and high frequency range. In case of the resonator inserted with perforated panels of 2, the 2nd resonance frequency is shifted to a low frequency band in proportion to the distance between perforated panels.

• 한국건축시공학회지
• /
• 제9권5호
• /
• pp.63-70
• /
• 2009

본 연구는 실리카와 칼슘의 수열합성 반응에 의해 제조하는 흡음형 경량기포콘크리트의 개발에 관한 일련의 연구이다. 원료는 석탄화력발전소의 부산물로 발생되는 바텀애시를 미분화한 것을 실리카원으로 사용하였고, 1종보통포틀랜드시멘트, 알루미나 시멘트, 소석회를 칼슘원으로 사용하였다. 경화체 내에서 연속기포를 형성하기 위하여 기포제를 이용하여 발포한 기포를 슬러리와 혼합한 후 몰드에 타설하는 선발포 방식으로 시험체를 제조하였다. 실험인자는 물분체비, 기포제 희석비, 기포 혼입비로 설정하였고 이들 요인이 흡음형 기포콘크리트의 압축강도, 절건밀도, 전공극률, 연속공극률, 흡음성능에 미치는 영향을 검토하였다. 실험결과 기포콘크리트의 흡음성능은 거의 모든 실험 수준에서 흡음재료를 위한 NRC의 요구성능을 만족하는 것으로 나타났다. 기포비는 가장 지배적인 인자이고 이 연구에서 기포콘크리트의 모든 특성에 현저하게 영향을 끼치는 것으로 나타났다. 물분체비는 압축강도와 절건밀도 뿐만 아니라 전공극률과 연속공극률에 거의 영향을 끼치지 않았고 기포제 희석비는 거의 모든 특성에 영향을 주지 않았다. 흡음성능과 흡수시간 및 연속공극률의 상관관계 분석결과 흡수시간은 연속공극률과의 상관성이 높은 것으로 나타났다.

• 한국정보통신학회논문지
• /
• 제19권3호
• /
• pp.500-506
• /
• 2015

본 논문에서는 자성 금속재료인 센더스트(Sendust)를 이용하여 2.4 GHz ISM 대역의 전자파 노이즈 억제를 목적으로 하는 EMI/EMC 대책용 전파흡수체를 설계 제작하였다. CPE (Chlorinated Ploy-ethylene)를 바인더로 하여 압착 Sendust와의 조성비 별로 전파흡수체 샘플을 제작하였고, 이를 분석하여 최적의 조성비를 탐색하였다. 그 결과 최적의 조성비는 Flaked Sendust : CPE = 72.5 : 27.5 wt.%로 밝혀졌다. 전파 흡수체 샘플로부터 도출된 재료정수를 이용하여 두께의 변화에 따른 전파흡수능의 변화를 시뮬레이션 하였으며, 그 결과를 토대로 제작한 전파흡수체의 전파흡수능과 시뮬레이션 결과치가 잘 일치하는 것을 확인하였다. 이 경우, 중심주파수 2.4 GHz에서 5.4 dB의 전파흡수능을 보였으며, 이때 전파흡수체의 정합두께는 0.6 mm로서 종래의 전파흡수체에 비해 초박형이어서 실용성이 높고 고성능화됨을 알았다. 본 논문에 제시한 초박형화 전파흡수체는 전자회로 및 회로부품으로부터 방사되는 전자파를 억제하거나 효율적으로 흡수하여 정보통신기술의 발전에 기여할 것으로 기대된다.

• 콘크리트학회논문집
• /
• 제21권5호
• /
• pp.557-563
• /
• 2009

이 연구는 수열합성반응을 통해 규사분을 사용한 무기질 다공성 규산칼슘 재료의 특성에 관한 것으로, 다양한 제조과정에 의해 발생하는 규산질 부산물을 사용한 소음 저감용 다공성 경화체 개발을 위한 기초적 자료로 사용하고자 하였다. 오토클레이브 양생 시편의 제조를 위해 다양한 칼슘질 재료를 사용하였고 규산질 재료는 규사분을 사용하였다. 이 연구에서, W/B와 C/S비에 따라 밀도와 강도 특성, 공극의 형태를 위한 현미경, 오토클레이브양생 후의 수화물 검사를 위해 주사전자현미경과 엑스선회절분석을 각각 수행하였다. 측정 결과로 굳지 않은 상태에서 W/B가 증가할 수록 슬러리 밀도는 점점 감소하고 이러한 경향은 굳은 상태에서도 유사하게 나타났다. 압축강도는 C/S비 0.85 시편이 가장 높게 나타났다. 토버모라이트는 C/S비와는 상관없이 모든 시편에서 생성되었다. 공극구조를 확인하기 위해, 기존에 사용되고 있는 다공질 규산칼슘 제품(ALC, 무기질 흡음재)을 비교했다. 관찰 결과, 기존의 무기질 흡음형 다공성 경화체 기공과 유사한 형상을 보였다. 따라서 이러한 결과를 바탕으로 소음저감형 다공성 경화체의 개발 가능성을 확인 할 수 있었다.