• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.7
• /
• pp.804-808
• /
• 2010

In this paper, we propose Restricted Angle-control Flooding considered density network of sensor nodes and node‘s limit energy. Restricted Angle-control Flooding, increase energy efficiency by reducing unnecessary candidate nodes involved in forwarding closer to the destination. And The Hole when faced with our proposal to raise rates data through Hole Detection which is sender‘s forwarding area is extended or broadcast to the entire network. Compared to the traditional flooding, we show the superiority at the node’s energy consumption, data rate and network lifetime through the performance.

• Journal of Korea Multimedia Society
• /
• v.13 no.1
• /
• pp.83-92
• /
• 2010

Sensor networks applications can be employed by a vast range of applications. Environmental information monitoring systems and ecosystem surveillance are representative application using sensor networks. But, limited battery capacity of sensor node is a key feature that determines lifetime of networks and system. It also affects quality of collected data. We recognized factors that affects lifetime of environment sensor nodes through the experiment of environment information system deployed over campus. We will show useful proposals for future construction of sensor network application systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1571-1589
• /
• 2016

Nodes in MANETs are battery powered which makes energy an invaluable resource. In OLSR, MPRs are special nodes that are selected by other nodes to relay their data/control traffic which may lead to high energy consumption of MPR nodes. Therefore, employing energy efficient MPR selection mechanism is imperative to ensure prolonged network lifetime. However, misbehaving MPR nodes tend to preserve their energy by dropping packets of other nodes instead of forwarding them. This leads to huge energy loss and performance degradation of existing energy efficient MPR selection schemes. This paper proposes an energy efficient secure MPR selection (ES-MPR) technique that takes into account both energy and security metrics for MPR selection. It introduces the concept of 'Composite Eligibility Index' (CEI) to examine the eligibility of a node for being selected as an MPR. CEI is used in conjunction with willingness to provide distinct selection parameters for Flooding and Routing MPRs. Simulation studies reveal the efficiency of ES-MPR in selection of energy efficient secure and stable MPRs, in turn, prolonging the network operational lifetime.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.587-590
• /
• 2019

This paper is about to improve the network life's reduction due to the deviation of sensor node and frequently change of network, the main problem of sensor network. The existing Scalable Topology Organization(STO)-based ZigBee Tree Topology Control Algorithm did not consider ways to consume power so the network lifetime is too short. Accordingly, per each round, electing a new parent node and consisting of the new network topology technique, The Cluster Header Selection, extending the network's overall lifetime. The OMNet++ Simulator yielded results from the existing STO Algorithm and the proposed Cluster Header Selection Technique in the same experimental environment, which resulted in an increase in overall network life by about 40% and an improvement of about 10% in performance in the remaining portion of the battery.

• Journal of Internet Technology
• /
• v.21 no.4
• /
• pp.977-988
• /
• 2020

A guard-band is used to prevent collision between paths in multipath routing protocols. However, problems such as traffic congestion, reduced lifetime, and void occurrence arise because existing protocols do not exploit the guard-band during packet transmission, but only transfer packets on the same path. To solve these problems, we propose radio-disjoint multipath routing that consists of guard-band shifting and balanced node selection. The proposed scheme transfers a packet on the constructed path and alternatively, into the guard-band area. In addition, the intermediate node is selected according to link quality and remaining energy, so all of the nodes involving packet transmission can be exploited equally. Through a performance evaluation, we demonstrate that the proposed scheme achieves a higher packet delivery ratio and prolongs the average network lifetime by at least 31% and up to approximately 99% compared with existing routing protocols, under the condition of a 90% link success ratio.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.593-594
• /
• 2015

In wireless sensor networks (WSNs), due to the very low data rate, the sleeping schedule is usually used to save consumed energy and prolong the lifetime of nodes. However, duty-cycled approach can cause a high end-to-end (E2E) delay. In this paper, we study a node scheduling algorithm in WSNs such that E2E delay meets bounded delay with a given probability. We have applied the probability theory to spot the relationship between E2E delay and node interval. Simulation result illustrates that we can create the network to achieve given delay with prior probability and high energy use efficient as well.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2826-2834
• /
• 2013

In mobile ad hoc networks (MANET), power-saving technology of mobile nodes is divided into transmit power control (TPC), power-saving mode (PSM), and routing. TPC and PSM are operated in physical layer but the routing is managed in network layer, so the design of a joint algorithm is needed to provide better performance. Therefore, in this paper, we propose a joint power-saving and routing algorithm for maximizing the network lifetime while satisfying the end-to-end data rate in ad hoc networks. The proposed algorithm first applies the TPC or PSM to reduce the power consumption of mobile nodes and then performs the routing by considering the decided node lifetime in order to maximize the path lifetime. Simulation results show that the proposed algorithm maximize the lifetime while satisfying the required rate according to the number of mobile nodes and the level of interference.

• Smart Media Journal
• /
• v.6 no.4
• /
• pp.24-31
• /
• 2017

In wireless sensor networks, sensor nodes are deployed in a remote, harsh environment. When the power of the sensor node is consumed in such a network, the sensor nodes become useless together with the deterioration of the quality and performance of the sensor network which may save human life. Although many clustering protocols have been proposed to improve the energy consumption and extend the life of the sensor network, most of the previous studies have shown that the overhead of the cluster head is quite large. It is important to design a routing protocol that minimizes the energy consumption of each node and maximizes the network lifetime because of the power limitations of the sensor nodes and the overhead of the cluster heads. Therefore, in this paper, we propose an efficient clustering scheme that reduces the burden of cluster heads, minimizes energy consumption, and uses algorithms that maximize network lifetime. Simulation results show that the proposed clustering scheme improves the energy balance and prolongs the network life when compared with similar techniques.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.10
• /
• pp.3439-3457
• /
• 2014

Clustering is an effective method for improving the performance of large scale mobile ad hoc networks. However, when the moving speed is very fast, the topology changes quickly, which leads to frequent cluster topology updates. The drastically increasing control overheads severely threaten the throughput of the network. SCBCS (Signal Characteristic Based Cluster Scheme) is proposed as a method to potentially reduce the control overheads caused by cluster formation and maintenance in aeronautical ad hoc networks. Each node periodically broadcasts Hello packets. The Hello packets can be replaced by data packets, which preserve bandwidth. The characteristics of the received packets, such as the Doppler shift and the power of two successive Hello packets, help to calculate the relative speed and direction of motion. Then, the link connection lifetime is estimated by the relative speed and direction of motion. In the clustering formation procedure, the node with the longest estimated link connection time to its one-hop neighbors is chosen as the cluster head. In the cluster maintenance procedure, re-affiliation and re-clustering schemes are designed to keep the clusters more stable. The re-clustering phenomenon is reduced by limiting the ripple effect. Simulations have shown that SCBCS prolongs the link connection lifetime and the cluster lifetime, which can reduce the topology update overheads in highly dynamic aeronautical ad hoc networks.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.54-60
• /
• 2011

The development of wireless sensor networks (WSN) can be motivated by several types of applications. However, these applications demand an energy-efficient WSN that can prolong the network lifetime and can provide high throughput, low latency and delay. Designing wireless sensor networks with the capability of prolonging network lifetime catch the attention of many researchers in wireless system and network field. Contrasts with Mobile Ad Hoc Network system, Wireless Sensor Networks designs focused more on survivability of each node in the network instead of maximizing data throughput or minimizing end-to-end delay. In this paper, we will study part of data link layer in Open Systems Interconnection (OSI) model, called medium access control (MAC) layer. Since the MAC development of energy aware MAC Protocol for wireless sensor layer controls the physical radio part, it has a large impact on the overall energy consumption and the lifetime of a node. This paper proposes a analytical approach that tries to reduce idle energy consumption, and shows the increasement of network end-to-end arrival rate due to efficiency in energy consumption from time slot management.