• 상하수도학회지
• /
• 제16권6호
• /
• pp.726-732
• /
• 2002

Pressure drop could happen in the water distribution systems due to pipe breaks or maintenance. The pressure drop causes the water service shutdown and nodal water demands should be reduced in some areas. The conventional analysis method of water distribution systems can not consider the change of nodal water demands caused by these pressure drops. This study is to investigate the variation of nodal water demands according to the nodal water pressure and its effect on the analysis of water distribution systems. For these purpose, one real water service district was selected as a study area. As a result, nodal water demand patterns according to the water pressure could be suggested. Also, we could confirm that the suggested new analysis method for the water distribution systems which considering water pressure drops could be more reliable than the conventional method.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권2호
• /
• pp.107-113
• /
• 2003

In a deregulated electric power market, a demand function to consider the characteristics of electric power consumers should be required. It is essential that the optimal power flow algorithm with object function of social welfare maximization using the demand function for a competitive electric power market is applied to resolve in a point of economic benefits as well as the security of power systems. Therefore, in this paper, we implement the optimization problem based on linear programming to consider the characteristics of electric power consumers using the demand function and analyze not only the nodal cost for generations and demands but also the variation of demands as a function of the characteristics of electric power consumers through numerical studies.

• 한국수자원학회논문집
• /
• 제43권9호
• /
• pp.769-780
• /
• 2010

'위상적 평가'와 '수리학적 평가'를 통해 수요절점에서 필요한 수량을 필요한 압력으로 충분히 공급할 수 있는지의 여부를 정량화하고 이를 신뢰성의 산정을 위한 기준으로 사용하는 것은 대표적인 상수관망시스템의 신뢰성산정 방법이다. 하지만 '수리학적 평가'를 이용한 수요절점에서의 압력확보 여부를 신뢰성 산정에 사용한 기존의 연구들은 'Demand-Driven Analysis의 사용'과 '사용성의 미고려'라는 두 가지 측면에 있어서 문제가 있다. 또한 비정상상태인 상수관망시스템의 수리모의 적합한 Pressure-Driven Analysis를 이용한 연구들도 신뢰성 산정에 있어 가능공급량만을 고려하고 사용성을 고려하지 않아, Pressure-Driven Analysis의 장점이 효율적으로 사용되지 않은 단점이 있다. 본 연구에서는 기 개발 된 Pressure-Driven Analysis 모형인 HSPDA모형과, 거리척도 방법을 이용하여 수량과 수압을 동시에 고려하는 신뢰성 분석기법을 제안하였다. 제안된 기법을 상수관망에 적용하여 기존의 연구결과와 비교하였고 이를 바탕으로 수립 가능한 신뢰성 확보방안을 제시하였다.

• 한국수자원학회논문집
• /
• 제43권2호
• /
• pp.201-210
• /
• 2010

본 연구에서는 HSPDA모형을 기반으로 한 상수관망의 신뢰도분석 방안을 제안하였다. 대표적인 상수관망의 신뢰도분석 방법으로는 수량과 수압의 확보가 불가능한 수요절점을 산정하고 필요수량/공급가능수량 혹은 압력확보절점수/전체절점수 등을 계산하여 상수관망이 얼마나 신뢰할 수 있는가를 판단하는 것이 있다. 이를 계산하기 위해서는 수리모형을 이용한 상수관망의 모의가 필요하나 절점의 압력과는 상관없이 항상 모든 용수량은 공급가능하다는 가정을 사용하는 Demand-Driven Analysis (DDA) 를 신뢰도 분석에 사용할 경우 신뢰도가 과소 산정될 수 있으며, 절점수요는 절점수두에 비례한다는 가정을 사용하는 Pressure-Driven Analysis (PDA)의 적용이 필요하다. 그러나 기존에 수행된 많은 연구에서는 관망의 특성에 따라 제한적인 적용성을 가지는 PDA 모형과 semi-PDA모형이 비정 상운영상태의 상수관망 수리모의에 이용되었고 이로 인하여 정확한 상수관망의 신뢰도 산정이 어려웠다. 본 연구에서는 기존의 PDA모형의 가지는 단점을 보완한 HSPDA 모형과 Available Demand Fraction (ADF) 지수를 이용하여 상수관망의 신뢰도 산정이 가능한 모형을 제안하였다. HSPDA를 활용하여 상수관망의 비정상운영상태를 모의하고, 이를 이용하여 절점별 ADF 지수를 산정, 상수관망의 신뢰도를 산정하였다. 제안된 신뢰도분석기법을 대상관망에 적용하여 기존의 연구결과와 비교하였으며, 이를 바탕으로 수립 가능한 신뢰도 확보방안을 제시하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.302-303
• /
• 2005

• Composites Research
• /
• 제32권5호
• /
• pp.243-248
• /
• 2019

As demand of light weight in the automotive industry has increased, the cowl cross member has been investigated using various methods to change the material. Conventionally, a cowl cross member has been made of steel and aluminum, but recently researchers tested multi-material such as aluminum and plastic. We studied a new model of the cowl cross member made of composite and non ferrous materials. For products with a high degree of freedom in design, generally, the method of topology optimization is advantageous and for the partial bracket part of the cowl cross member had a degree of freedom in the design, a topology optimization is appropriate. Considering the characteristics of the cowl cross members, we need research to minimize the weight while having the performance of noise, vibration and harshness(NVH). Taking the mounting status of the product into consideration, we used an assembly model to optimize the cowl cross member. But this method took too much time so we considered simple cowl cross member assemble conditions using the direct matrix input method(DMI) with the Craig-Bampton Nodal Method. This method is capable of considering the status of the assembly without assembling the model, which reduced the solving time and increased the accuracy comparison with a cowl cross member without DMI.

• 농촌지도와개발
• /
• 제5권1호
• /
• pp.93-102
• /
• 1998

The objectives of the study were 1) to make the reasonable standard, 2) to select the objective and scientific method and process for the location-allocation of a new provincial capital city. The Main standard of location-allocation were suggested as follows ; 1) Integration of province 2) Convenience of Administration service 3) Accomodations of new provincial capital city 4) Balanced development by region. The validity of location-allocation were reviewed the population potentials and nodal accessibilities. The population potential was examined to find the maximum point of administrative demand, and the locationallocation model was examined to find the minimum point of the aggregated travel-cost to a proposed provincial government office. The nodal accessibilities measured in travel-time distance and actual values. Two major concerns in locating public facilities are efficiency and equity.

• 상하수도학회지
• /
• 제11권3호
• /
• pp.51-58
• /
• 1997

Determining sizes and the locations of reservoirs in the water distribution system(WDS) with multi-reservoirs is much difficult than that with single reservoir. The extended period simulation(EPS) models provide more comprehensive analysis of water distribution systems than the steady-state models can do. Therefore, EPS models should be applied to the WDS with multi-reservoirs. This study is to investigate the variations of required reservoir sizes and residual nodal pressures according to reservoir locations. In this study, EPS was applied to analyze an artificial and a real WDS under several water demand patterns. As a result, it was found that water demand patterns make no significant differences in the determining of the reservoir size, if they have similar peaking factors. And the variations of the peaking factor should be carefully checked in the design and the analysis of the WDS with multi-reservoirs, because the peaking factor itself will affect the minimum allowable sizes of reservoirs in those systems.

• 상하수도학회지
• /
• 제27권1호
• /
• pp.1-10
• /
• 2013

Major issues in water supply service have changed from expansion of service area to improvement of service quality, i.e., water quality and safety, and early response to emergency situation. This change in the service concept triggers the perceptions of limitation with the current centralized water supply system and of necessities of decentralized (distributed) water supply system (DWSS), which can make up the limitations. DWSS can reduce the possibility of water supply outage by establishing multiple barriers such as emergency water supply system, and secure better water quality by locating treatment facilities neighboring consumers. On the other hand, fluctuation of water demand will be increased due to the reduced supply area, which makes difficult to promptly respond the fluctuating demand. In order to supplement this, hybrid water supply system was proposed, which combined DWSS with conventional water supply system using distributing reservoir to secure the stability of water supply. The Optimal connection point of DWSS to existing water supply network in urban area was determined by simulating a supply network using EPANET. Optimal location of decentralized water treatment plant (or connection point) is a nodal point where changes in pressure at other nodal points can be minimized. At the same time, the optimal point should be selected to minimize hydraulic retention time in supply network (water age) to secure proper water quality. In order to locate the point where these two criteria are satisfied optimally, Distance measure method, one of multi-criteria decision making was employed to integrate the two results having different dimensions. This methodology can be used as an efficient decision-support criterion for the location of treatment plant in decentralized water supply system.

• 물과 미래
• /
• 제27권1호
• /
• pp.111-121
• /
• 1994

본 연구의 목적은 한정된 자료원을 각 용수 수요점 별로 용수공급 우선 순위에 따라서 최적배분하기 위한 Network 모형을 구성하는 것이다. 본 모형의 해법은 OKA(Out of Kilter Algorithm)를 사용하였다. 모형에 대한 이론적 방법론과 프로그램을 검증하고 적용하기 위하여 금강유역을 선정했다. 대청댐 방유량과 금강 유역의 용수수요량을 사용하여, 각 수요점의 용수공급 우선 순위를 1~ 4개의 경우로 설정하고 수자원의 최적배분을 시행하였다. 모형을 적용한 결과, 물리적인 시스템을 타당성 있게 표현할 수 있었고, 높은 우선 순위로 조정된 수요점에서는 물 부족량을 줄일 수 있었다. 본 모형의 해법은 Revised Simplex 알고리즘에 의해 검증하였다.