• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.2
• /
• pp.21-25
• /
• 2013

The system and components for aircraft are required the design data on which the safety requirements are properly reflected for their certification. This paper presents the procedure and results of a safety assessments analysis for the rotorcraft fuel pumps in oder to confirm and verify them. The fuel pumps design assessment must be performed, including a detailed failure analysis to identify all failures that will prevent continued safe flight or safe landing. In order to assess the fuel pumps design safety, not only system safety hazard analysis and but FTA(Fault Tree Analysis) for proofing the safety objective of the fuel pumps are performed. The results of the safety assessment for fuel pumps validate that no single failure or malfunction could result in catastrophic failure or critical accidents of the rotorcraft.

• International Journal of High-Rise Buildings
• /
• v.2 no.2
• /
• pp.141-152
• /
• 2013

This paper presents a brief overview of the recently developed performance-control method of moment frame design subjected to monotonously increasing lateral loading. The final product of any elastic-plastic analysis is a nonlinear loaddisplacement diagram associated with a progressive failure mechanism, which may or may not be as desirable as expected. Analytically derived failure mechanisms may include such undesirable features as soft story failure, partial failure modes, overcollapse, etc. The problem is compounded if any kind of performance control, e.g., drift optimization, material savings or integrity assessment is also involved. However, there is no reason why the process can not be reversed by first selecting a desirable collapse mechanism, then working backwards to select members that would lead to the desired outcome. This article provides an overview of the newly developed Performance control methodology of design for lateral resisting frameworks with a view towards integrity control and prevention of premature failure due to propagation of plasticity and progressive P-delta effects.

• Journal of Aerospace System Engineering
• /
• v.10 no.1
• /
• pp.51-58
• /
• 2016

In this paper, we present some results on No-failure accelerated life test of aerial vehicle for reliability demonstration. The design of general accelerated life test consists of the three phases: 1) Estimating normal life test time of a single product from Weibull distribution model; 2) Determining the acceleration factor (AF) by utilizing the relation between the life of mechanical components and the applied torque; 3) Calculating the accelerated life test time, which comes from dividing the estimated normal life test time into AF. Then, we applied the calculated life test time to the real reliability test of the flap actuating system, while considering the requirement specification for mechanical components and operating environment of the actuation system. Real experimental processes and results are presented to validate the theory.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.6
• /
• pp.832-841
• /
• 2016

The voltage-frequency island (VFI) design paradigm has strong potential for achieving high energy efficiency in communication centric manycore system-on-chip (SoC) design called network-on-chip (NoC). However, because of the diminished scaling of wire-dimension and supply voltage as well as threshold voltage in modern CMOS technology, the vulnerability to link failure in VFI NoC is becoming a crucial challenge. In this paper, we propose an energy-optimized topology generation technique for VFI NoC to cope with permanent link failures. Based on the energy consumption model, we exploit the on-chip communication traffic patterns and characteristics of link failures in the early design stage to accommodate diverse applications and architectures. Experimental results using a number of multimedia application benchmarks show the effectiveness of the proposed three-step custom topology generation method in terms of energy consumption and latency without any degradation in the fault coverage metric.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.15
• /
• pp.6615-6619
• /
• 2015

Background: The expression of HER-2 in prostate cancer has been linked to disease progression. We analysed the presence of HER-2 expression in primary tumors in men undergoing radical prostatectomy, its association with clinical and pathological findings, and its expression in secondary circulating prostate cells (CPCs) during follow up, as well as links with biochemical failure and the effects of androgen blockade. Materials and Methods: Consecutive men undergoing radical prostatectomy for histologically confirmed prostate cancer were analyzed. HER-2 expression in the primary tumor was assessed using the HercepTest(R), CPCs were identified from blood samples using standard immunocytochemistry with anti-PSA and positive samples with the HercepTest(R) to determine HER-2 expression. The influence of HER-2 expression on the frequency of biochemical failure and effects of androgen blockade was determined. Results: 144 men with a mean age of $64.8{\pm}10.3$ years participated, with a median follow up of 8.2 years. HER-2 was expressed in 20.8% of primary tumors; it was associated with vascular infiltration and older age, but not with other clinical pathological findings. Some 40.3% of men had secondary CPCs detected, of which 38% expressed HER-2. Men CPC (+) had a higher frequency of biochemical failure, but there was no difference in HER-2 expression of CPCs with the frequency of biochemical failure. After androgen blockade, men with HER-2 (+) positive secondary CPCs had a higher frequency of disease progression to castrate resistant disease. Conclusions: HER-2 plays a dual role in the progression of prostate cancer; firstly it may increase the potential of tumor cells to disseminate from the primary tumor via the blood by increasing vascular infiltration. In the presence of androgens, there is no survival advantage of expressing HER-2, but once biochemical failure has occurred and androgen blockade started, HER-2 positive cells are resistant to treatment, survive and grow leading to castration resistant disease.

• Hip & pelvis
• /
• v.35 no.3
• /
• pp.175-182
• /
• 2023

Purpose: This study aims to compare patients in whom fixation failure occurred via cut-out (CO) or cut-through (CT) in order to determine patient factors and radiographic parameters that may be predictive of each mechanism. Materials and Methods: This retrospective cohort study includes 18 patients with intertrochanteric (IT) hip fractures (AO/OTA classification 31A1.3) who underwent treatment using a single lag screw design intramedullary nail in whom fixation failure occurred within one year. All patients were reviewed for demographics and radiographic parameters including tip-to-apex distance (TAD), posteromedial calcar continuity, neck-shaft angle, lateral wall thickness, and others. Patients were grouped into cohorts based on the mechanism of failure, either lag screw CO or CT, and a comparison was performed. Results: No differences in demographics, injury details, fracture classifications, or radiographic parameters were observed between CO/CT cohorts. Of note, a similar rate of post-reduction TAD>25 mm (P=0.936) was observed between groups. A higher rate of DEXA (dual energy X-ray absorptiometry) confirmed osteoporosis (25.0% vs. 60.0%) was observed in the CT group, but without significance. Conclusion: The mechanism of CT failure during intramedullary nail fixation of an IT fracture did not show an association with clinical data including patient demographics, reduction accuracy, or radiographic parameters. As reported in previous biomechanical studies, the main predictive factor for patients in whom early failure might occur via the CT effect mechanism may be related to bone quality; however, conduct of larger studies will be required in order to determine whether there is a difference in bone quality.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.105-113
• /
• 2014

PURPOSES: The objective of this paper is to select the confidential intervals by utilizing the second moment reliability index(Hasofer and Lind; 1974) related to the number of load applications to failure which explains the fatigue failure and rut depth that it indicates the permanent deformation. By using Finite Element Method (FEM) Program, we can easily confirm the rut depth and number of load repetitions without Pavement Design Procedures for generally designing pavement depths. METHODS : In this study, the predictive models for the rut depth and the number of load repetitions to fatigue failure were used for determining the second moment reliability index (${\beta}$). From the case study results using KICTPAVE, the results of the rut depth and the number of load repetitions to fatigue failure were deducted by calculating the empirical predictive equations. Also, the confidential intervals for rut depth and number of load repetitions were selected from the results of the predictive models. To determine the second moment reliability index, the spreadsheet method using Excel's Solver was used. RESULTS : From the case studies about pavement conditions, the results of stress, displacement and strain were different with depth conditions of layers and layer properties. In the clay soil conditions, the values of strain and stresses in the directly loaded sections are relatively greater than other conditions. It indicates that the second moment reliability index is small and confidential intervals for rut depth and the number of load applications are narrow when we apply the clay soil conditions comparing to the applications of other soil conditions. CONCLUSIONS : According to the results of the second moment reliability index and the confidential intervals, the minimum and maximum values of reliability index indicate approximately 1.79 at Case 9 and 2.19 at Case 22. The broadest widths of confidential intervals for rut depth and the number of load repetitions are respectively occurred in Case 9 and Case 7.

• Journal of Sasang Constitutional Medicine
• /
• v.17 no.3
• /
• pp.103-112
• /
• 2005

1. Objective : The present author have examined the comparative effects of Hyeongbangjihwang-tang and Sibimikwanjung-tang in glycerol-induced acute renal failure, a model for myoglobinuric acute renal failure. 2. Methods : Above two prescriptions were applied to rat ad libitum and serum level of creatinine, glucose and blood urea nitrogen(BUN) were measured. And serum level of $Na^+$, $K^+$ and $Cl^-$, too. 50%(vol/vol) glycerol at a dose of 10 ml/kg of rat body weight intramuscularly and 1% concentration of prescriptions were applied to rats for 7 days ad libitum. 3. Results : Serum level of creatinine and $K^+$ significantly increased by glycerol injection, and these showed pre-renal and renal cause of acute renal failure. Hyeongbangjihwang-tang administered group showed decreasing tendency on serum level of creatinine when compared with control groups, but not significant. Sibimikwanjung-tang administered group showed significant increase of serum level of BUN when compared with control groups. 4. Conclusions : Above two prescriptions showed no significant changes on glycerol induced acute renal failure, but Hyeongbangjihwang-tang and Sibimikwanjung-tang showed a little different manner of response.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.322-324
• /
• 2004

Up to the present, digital replantation patients has appealed different symptoms due to blood circulatory failure. But, the level of blood circulatory failure has been evaluated only by clinical symptoms, or angiography. According to the cases of digit replantation is increasing, then objective evaluation methods of the level of blood circulation failure is needed other than patient's subjective symptoms and complaints. Although angiography, doppler, electromagnetic flowmeter, laser blood flowmeter, mechanical blood flowmeter has been used for the evaluation of the blood circulatory failure, the result was affected by time, place, surrounding temperature, patient's body temperature, and even emotion. Therefore, it is pointed out with lack of availability, feasibility and reproducibility. Thus, we compared digital blood flow of dominant hand to non dominant hand, and replanted fingers to opposite normal fingers from developed photo-plethysmography. The average digital blood flow showed no difference in normal digits each other, but, replanted digits showed average of 53% (9 - 100 %) compare to opposit normal digits. As it measure relative blood flow for circulatory failure of tissue such as fingers and toes more sensitively, reliably. In conclusion, it is expected that photo- plethysmography will be very useful for diagnosis, curative effect, prognosis of blood circulatory failure in digital replantation patient.

• Geomechanics and Engineering
• /
• v.15 no.4
• /
• pp.965-972
• /
• 2018

In deep braced excavations, struts and walers play an essential role in the whole supporting system. For multi-level strut systems, accidental strut failure is possible. Once a single strut fails, it is possible for the loads carried from the previous failed strut to be transferred to the adjacent struts and therefore cause one or more struts to fail. Consequently, progressive collapse may occur and cause the whole excavation system to fail. One of the reasons for the Nicoll Highway Collapse was attributed to the failure of the struts and walers. Consequently, for the design of braced excavation systems in Singapore, one of the requirements by the building authorities is to perform one-strut failure analyses, in order to ensure that there is no progressive collapse when one strut was damaged due to a construction accident. Therefore, plane strain 2D and three-dimensional (3D) finite element analyses of one-strut failure of the braced excavation system were carried out in this study to investigate the effects of one-strut failure on the adjacent struts.