• Microbiology and Biotechnology Letters
• /
• v.42 no.1
• /
• pp.32-40
• /
• 2014

Methane oxidation and the production potentials of ground soil (soil A) and garden soil (soil B, C, & D) in an urban school were evaluated, and the methanotrophic and methanogen communities in the soil samples were quantified using quantitative realtime PCR. The methanotrophic community in the raw soil A sample possessed a $6.1{\times}10^3$ gene copy number/g dry weight soil, whereas those in the raw soils B~D samples were $1.6-1.9{\times}10^5$ gene copy numbers/g dry weight soil. Serum bottles added with the soil samples were enriched with methane gas, and then evaluated for their methane oxidation potential. The soil A sample had a longer induction phase for methane oxidation than the other soils. However, soil A showed a similar methane oxidation potential with soils B~D after the induction phase. The methanotrophic community in the enriched soil A sample was increased by up to $2.3{\times}10^7$ gene copy numbers/g dry weight soil, which had no significantly difference compared with those in soils B~D ($1.2-2.8{\times}10^8$ gene copy numbers/g dry weight soil). Methane production showed a similar tendency to methane oxidation. The methanogens community in raw soil A ($1.7{\times}10^5$ gene copy number/g dry weight soil) was much less than those in raw soils B~D ($1.3-3.4{\times}10^7$ gene copy numbers/g dry weight soil). However, after methane gas was produced by adding starch to the soils, soil samples A~D showed $10^7$ gene copy numbers/g dry weight soil in methanogens communities. The results indicate that methanotrophic and methanogenic bacteria have coexisted in this urban school's soils. Moreover, under appropriate conditions for methane oxidation and production, methanotrophic bacteria and methanogens are increased and they have the potential for methane oxidation and production.

• The Korean Journal of Pesticide Science
• /
• v.19 no.1
• /
• pp.64-70
• /
• 2015

In order to control garlic white rot (Sclerotium cepivorum), which threatens garlic production in farmers fields, soil solarization (solar sterilization), sclerotia germination inducers and effective microorganisms as biological control agents, and chemical fungicides have been used. Among them, fungicide has been largely used to reduce garlic white rot. In this study, the antifungal activities of five fungicides, prochloraz(a.i. 25%, EC), tebuconazole (a.i. 25%, WP), flutolanil (a.i. 15%, EC), iminoctadine tris-albesilate (a.i. 40%, WP) and isoprothiolane (a.i. 40%, EC) with different mode of action, in mycelial growth, sclerotia germination and sclerotia production, were tested. The inhibitory effects of the 5 fungicides on the mycelial growth, and sclerotia germination and production of garlic white rot pathogen (S. cepivorum T11-2) were investigated on potato dextrose agar (PDA) and their control efficacies were evaluated on garlic flakes. There was no mycelial growth of S. cepivorum T11-2 on PDA amended with $0.8{\mu}g\;mL^{-1}$ of prochloraz or $100{\mu}g\;mL^{-1}$ of tebuconazole. Also prochloraz and tebuconazole inhibited perfectively the sclerotia germination of the pathogen at 10 and $1.0{\mu}g\;mL^{-1}$, respectively. In spite of a very low activity of isoprothiolane in mycelial growth and sclerotia germination of S. cepivorum T11-2, it showed a good inhibitory activity against sclerotia production of S. cepivorum T11-2 on PDA amended with $1.67{\mu}g\;mL^{-1}$. Prochloraz, tebuconazole and flutolanil showed above 70% of control value when they were treated at $100{\mu}g\;mL^{-1}$ using the garlic flake cutting-method.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.35-41
• /
• 1969

In order to determine proper ratio of wheat to soybean of soysauce koji material for Korean people's taste, sensory evaluation for the soysauces made from soysauce kojis with various above-mentioned ratio and analysis of chemical components through the brewing period of six months were carried out. The results obtained were summarized as follows: 1. The specific gravity of all the soysauces increased gradually as the time passed and had maximum values in two months with nearly constant values thereafter. Concerning soybean/wheat-ratio, generally, the higher soybean/wheat-ratio, the lower specific gravity was observed but when this ratio was higher than 10 : 6, the gravity was on the similar levels. 2. The solid material in all the soysauces increased in the earlier stage and there were no significant differences among the treatments but soysauces without wheat had a little low content. 3. The lesser amount of wheat as raw material was, the higher contents of total nitrogen were and the contents of total nitrogen in the every ratio of raw material increased parallely as the mash ages. 4. The amino-nitrogen levels were found to have the simllar tendency to total nitroghen levels. 5. The reducing sugar content was higher in the soysauces with more-wheat and increased rapidly up to the maximum level in two months and then the higher wheat/soybean-ratio was, the slower decrease of the sugar content was observed. 6. The maximum total acidity was observed in the soysauces with 10; 4-6 (soybean/wheat-ratio) and increased similary in all the soysauces throughout the period. 7. According to the sensory evaluation, the short (2-3 months) fermented soysauces showed best taste when soybean/wheat-ratio was 10 : 8 and 10 : 6 if diluted, but in long (4-6 months) fermented soysauces it was 10 : 6 and 10 : 4 if diluted.

• Restorative Dentistry and Endodontics
• /
• v.29 no.2
• /
• pp.177-184
• /
• 2004

Objectives : This study investigated the hypothesis that increasing light-curing time would leave the oxygen-inhibited layer (OIL) of the adhesive thinner, and in turn, result in lower shear bond strength (SBS) than those obtained by the routine curing procedures. Methods：120 human extracted posterior teeth were randomly divided into three groups for bonding with three adhesives：All Bond 2/sup (R)/, One Step/sup (R)/, and Adper Prompt/sup (R)/. They were subsequently divided into four subgourps with different light-curing time (10, 20, 30 and 60s). The assigned adhesives were applied on superficial occlusal dentin according to the manufacturer's instructions and cured with one of the four curing times. Composite resin cylinder, 2.35㎜ in diameter, were built on the cured adhesive and light-cured for 40s. SBS were measured after 24h from the bonding using a universal testing machine (crosshead speed 1.0 ㎜/min). The relative thickness of the OIL and the degree of conversion (DC) were determined from the adhesive on a slide glass using FT-NIR in an absorbance mode. Data were analysed with One-way ANOVA and Duncan's multiple test (p〈0.05), Results：With increasing cure time, although there were no significant difference in th SBS of One-step and Adper Prompt (p〉0.05), those of All Bond 2 decreased significantly (p〈0.05). The relative thicknesses of the OIL on each adhesive were not affected by the cure time (p〉0.05). Although the DC of All-Bond 2 were statistically not different with increasing cure time (p〉0.05), those of One-Step and Adper Prompt showed an increasing trends with increasing cure time (p〈0.05). Conclusions：Increasing light-curing time did not affect on the relative thickness of the OIL of the adhesives, and in turn, on the SBS to dentin.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.343-355
• /
• 2007

The objectives of this study was to evaluate the durability of 4 resin cements by means of microtensile bond strength test combined with thermocycling method and fractographic FE-SEM analysis. Experimental groups were prepared according to thermocycling (0, 1,000, 5,000) and the kind of resin cements, those were Variolink II, Multilink, Panavia F 2.0, Rely X Unicem. Flat dentin surfaces were created on mid-coronal dentin of extracted third molars. Then fresh dentin surface was grounded with 320-grit silicon carbide abrasive papers to create uniform smear layers. Indirect composite block (Tescera, Bisco Inc., Schaumburg, IL, USA) was fabricated ($12\;{\times}\;12\;{\times}\;6\;mm^3$). It's surface for bonding to tooth was grounded with silicon carbide abrasive papers from 180- to 600-grit serially, then sandblasted witk $20\;-\;50\;{\mu}m$ alumina oxide. According to each manufacturer's instruction, dentin surface was treated and indirect composite block was luted on it using each resin cement. For Rely X Unicem, dentin surface was not treated. The bonded tooth-resin block were stored in distilled water at $37^{\circ}C$ for 24 hours. After thermocycling, the bonded tooth-resin block was sectioned occluso-gingivally to 1.0 mm thick serial slabs using all Isomet slow-speed saw (Isomet, Buehler Ltd, Lake Bluff, IL, USA). These sectioned slabs were further sectioned to $1.0\;{\times}\;1.0\;mm^2$ composite-dentin beams. The specimens were tested with universal testing machine (EZ-Test, Shimadzu, Japan) at a crosshead speed of 1.0 mm/min with maximum load of 500 N. The data was analyzed using one-way ANOVA and Duncan's multiple comparison test at $p\;{\leq}\;0.05$ level. Within the limited results, we conclude as follows; 1. The bond strength of Variolink II was evaluated the highest among experimental groups and was significantly decreased after 1,000 thermocycling (p < 0.05). 2. The bond strength of Multilink was more affected by thermocycling than the other experimental groups and significantly decreased after 1,000 thermocycling (p < 0.05). 3. Panavia F 2.0 and Rely X Unicem showed the gradually decreased tendency of microtensile bond strength according to thermocycling but there was no significant difference (p > 0.05). 4. Adhesive based-resin cements showed lower bond strength with or without thermocycling than composite based-resin cements. 5. Variolink II & Multilink showed high bond strength and mixed failure, which was occurred with a thin layer of luting resin cement before thermocycling and gradually increased adhesive failure along the dentin surface after thermocycling. The bonding performance of resin cement can be affected by application procedure and chemical composition. Composite based-resin cement showed higher bond strength and durability than adhesive based-resin cement.

• The Korean Journal of Mycology
• /
• v.38 no.2
• /
• pp.130-135
• /
• 2010

To select the viable alternative substrates among the variable organic substrates for productivity enhancement and production cost-reduction of oyster mushroom in bottle culture, this study was carried out at mushroom research institute of GGRDA in 2007. In bottle culture of oyster mushroom (Plerutus ostreatus), the seedcakes of rape (RS), soybean (SS), coconut (CCS), and kapok (KS) were examined as substitute of cotton seedcake which was primary nutritive material of mushroom growing substrate. The chemical properties of substrate mixed with kapok seedcake is similar to the mixture with cotton seedcake in T-C, T-N, C/N ratio, and other nutrients. Mixed growing substrate containing cotton seedcake and kapok seedcake was superior to other mixtures 99.2% and 99.5%, respectively in spawning ratio and was faster mycellium growth in column test than that of soybeen seedcake, cotton + soybeen seedcake, and coconut seedcake. The period required in first pin-heading was 1-2 days longer in rape and soybeen seedcake mixture. Also there wad no primodia and fruitbody formation at soybeen seedcake mixture which had highest T-N content among the other mixed substrates. Yield per bottle and biological efficiency were highest of 144.6 g and 75.4%, respectively at kapok seedcake mixture. As a result, this study found that cotton seedcake can be replaced with kapok seedcake in bottle culture of oyster mushroom.

• Korean Journal of Weed Science
• /
• v.5 no.1
• /
• pp.73-84
• /
• 1985

25 tank-mixed combinations between Haloxyfop-methyl at 0, 0.05, 0.1, 0.15 and 0.2 kg ae/ha and Acifluorfen at 0, 0.082, 0.163, 0.245 and 0.326 kg ai/ha were applicated at post-emergence on the late-season cropped soybean(Glycine max) fields predominated by grasses and assessed on the weeding efficacy. A most abundant weed species on the experimented fields were found at September (25 species). The broadleaved weed species and sedges were successively and proportionately emerged by the control rate of grass species. From the mono-treatment of each herbicide, Haloxyfop-methyl was recognized as a highly selective one between grasses and soybean, and Acifluorfen between broadleaf weeds and soybean, respectively. By combined application with both herbicides a synergistic weeding efficacy was detected on total weed species, however antagonistic or additive on each weed groups. Among other traits of soybean, stem dry weight was influenced by weed competitions during October, number of pods per plant during August and seed yields during whole periods. For most effective and reasonable weeding, no less than 0.4 kg ai/ha of each herbicides should be applicated in combinations.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.1
• /
• pp.59-67
• /
• 1995

Blood lead assay by $D_2$ lamp background correction method of atomic absorption spectrophotometer(AAS) with wavelength of 283.3 nm is most popular in occupational health practice in Korea. On the other hand, $D_2$ lamp background correction method with wavelength of 217.0 nm is also often used in general chemical analysis for lead assay in general purpose. But both methods have some weakness of background correction which brought direct effect on the results of analysis. Recently blood lead assay with polarized Zeeman effect of AAS was introduced and is now preferred in many laboratory than $D_2$ correction method in blood lead analysis. But still AAS with $D_2$ lamp are widely used in the field of occupational health in Korea. This study compared blood lead assay data with $D_2$ correction methods(283.3 and 217.0 nm) and with that of polarized Zeeman effect correction method to evaluate the validity of 02 correction methods. The results obtained were as follows; 1. Taking the value of polarized Zeeman effect method as reference value of 1.00, the mean relative value of $D_2$ correction method with wavelength of 217.0 nm was 0.92 and that with wavelength of 283.3 nm was 0.90 respectively in the analysis of blood lead whose value were below $20.0{\mu}g/dl$(p<0.001). Both mean values were statistically smaller than polarized Zeeman effect correction method. But in the analysis of blood whose value were between 20.0 to $20.0{\mu}g/dl$, the mean relative value of $D_2$ correction method was 0.96 in both wavelength and did not differ from polarized Zeeman effect method(p<0.001). There was no difference of blood lead between $D_2$ correction method and polarized Zeeman effect method in the analysis of blood lead whose value were over $40.0{\mu}g/dl$. 2. The variations of background correction value in polarized Zeeman effect method were not changed by increase of blood lead, but those in $D_2$ correction methods were increased by the increase of blood lead. While then relative standard deviation(RSD) of data measured by Zeeman effect method were decreased by the increase of blood lead, those by $D_2$ methods were nol differed by the increase of blood lead.

• Korean Journal of Ecology and Environment
• /
• v.42 no.2
• /
• pp.260-269
• /
• 2009

Hwabuk Dam has been under construction to reduce flood damage in Nakdong River watershed and to supply stable water for middle area of Gyeongbuk Province. Therefore, fish investigation in up and downstream of the dam was conducted from 2004 to 2008 in order to determine any negative effect on fish community due to dam construction and to use as fundamental data for conserving species diversity and maintaining stream health. According to data analysis on water quality, temperature, dissolved oxygen, pH, suspended solids, and total E-coli had seasonal variation, but they did not significantly differ in sites. However, biological and chemical oxygen demand, chlorophyll-a, nitrogen, and phosphorus representing organic matter and nutrient concentration were higher in upper site and decreased to lower site so that they differed by site. Concentration of arsenic among the heavy metals was less than 0.05 mg $L^{-1}$, which is regulated for protection of human health in water quality standard, except for 0.092 mg $L^{-1}$ in June 2005. During the study period, the total number of fish caught from the 6 sites was 10,263 representing 7 families 19 species. Among them, dominant and subdominant species were Korean chub (Zacco koreanus, 62.5%) and Chinese minnow (Rhynchocypris oxycephalus, 10.6%) which inhabit mostly in mid and upper streams, Korea. Among the 19 species, Korean endemic species were 9 species (47.4%) including Korean slender gudgeon (Squalidus gracilis majimae), Korean dark sleeper (Odontobutis platycephala), and Korean shiner (Coreoleuciscus splendidus). There was several individuals of the $1^{st}$-class endangered species, Naktong nose loach (Koreocobitis nahtongensis), caught in 2005${\sim}$2007, and no introduced species of fish was found in entire sampling period. According to result of community analysis, dominance index decreased toward lower site, but diversity and richness indices increased toward lower site. The equation of length-weight relationship on the dominant species was TW=0.000003$(TL)^{3.2603}$. The parameter b in the equation was greater than 3.0 indicating good nutritional condition in the populations. Compared to populations of Korean chub in other streams, the population in Hwabuk Dam watershed had higher mean of condition factor by size indicating better growth rate. With fish fauna and multi-metric health assessment model in each sampling attempt, index of biotic integrity (IBI) was evaluated and it resulted mostly in good (26${\sim}$35) and excellent (36${\sim}$40) condition in all sites, and the mean of IBI was the highest in site 5. The results indicate that it is very important to study not only environmental impact assessment with fish composition but also stream health assessment in order to conserve healthy aquatic ecosystem.

• Journal of Animal Environmental Science
• /
• v.13 no.3
• /
• pp.153-160
• /
• 2007

Study for the effect of three different microbial feed additives(henceforth MA-A, MA-B, and MA-C) on feed coversion rate, and physical and chemical characteristics of swine finisher was conducted. MA-B had higher number of Lactobacillus spp. and yeast, compared to any other. The amylase activity of MA-B was also higher than any other. The daily feed intake rates of pigs fed control, MA-A, MA-B and MA-C were 3.15, 3.14, 3.31 and 3.42 kg, respectively. MA-C had the highest weight gain. However, there was no significant difference between treatments. The weights of feces daily excreted by pigs fed control, MA-A, MA-B, and MA-C were 2.14, 2.02, 2.18, and 2.23 kg/day, respectively. The volume of urine daily excreted by pigs fed control, MA-A, MA-B, and MA-C were 3.14, 3.26, 3.27, and $3.41\;{\ell}/day$, respectively. Water content, T-N, $P_{2}O_{5}$, and $K_{2}O$ in swine manure were not significantly different between treatments. The BOD were between 42,576 and $67,450\;mg/{\ell}$ for feces and were between 5,882.5 and $8,657.5\;mg/{\ell}$ for urine, respectively. The SS were between 138,000 and $180,000\;mg/{\ell}$ for feces and were between 875.0 and $1450.0mg/{\ell}$ for urine, respectively.