• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.542-550
• /
• 2011

This paper describes the design and hardware implementation of a Single Input Fuzzy Logic Controller (SIFLC) to regulate the output voltage of a boost power converter. The proposed controller is derived from the signed distance method, which reduces a multi-input conventional Fuzzy Logic Controller (CFLC) to a single input FLC. This allows the rule table to be approximated to a one-dimensional piecewise linear control surface. A MATLAB simulation demonstrated that the performance of a boost converter is identical when subjected to the SIFLC or a CFLC. However, the SIFLC requires nearly an order of magnitude less time to execute its algorithm. Therefore the former can replace the latter with no significant degradation in performance. To validate the feasibility of the SIFLC, a 50W boost converter prototype is built. The SIFLC algorithm is implemented using an Altera FPGA. It was found that the SIFLC with asymmetrical membership functions exhibits an excellent response to load and input reference changes.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.2B no.3
• /
• pp.81-89
• /
• 2002

The sensorless AC motor drive is a popular topic of study due to the cost and reliability of speed and position sensors. Most sensorless algorithms are based on the mathematical modeling of motors including electrical variables such as phase current and voltage. Therefore, the accuracy of such variables largely affects the performance of the sensorless AC motor drive. However, the output voltage of the SVPWM-VSI, which is widely used in sensorless AC motor drives, has considerable errors. In particular, the SVPWM-VSI is error-prone in the low speed range because the constant DC link voltage causes poor resolution in a low output voltage command and the output voltage is distorted due to dead time and voltage drop. This paper investigates a novel high-performance strategy for overcoming these problems in a sensorless ac motor drive. In this paper, a variation of the DC link voltage and a direct compensation for dead time and voltage drop are proposed. The variable DC link voltage leads to an improved resolution of the inverter output voltage, especially in the motor's low speed range. The direct compensation for dead time and voltage drop directly calculates the duration of the switching voltage vector without the modification of the reference voltage and needs no additional circuits. In addition, the proposed strategy reduces a current ripple, which deteriorates the accuracy of a monitored current and causes torque ripple and additional loss. Simulation and experimentation have been performed to verify the proposed strategy.

• The Korean Journal of Food & Health Convergence
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2017

The study has made theoretical system by thesis journals at home and abroad, material of the Association of Convenience Store Industry of Korea, materials of Statistics Korea and reference books. First, the study examined convenience store's brand image, cognized value, quality level, reliability upon brand, structural relation of purchasing intention, and designed models and theses. Second, the first questionnaire consisted of test items of precedent study, and inspected in advance to inspect reliability and appropriateness, and made correction and supplemented problems. Third, SPSS and AMOS statistics were used to conduct empirical analysis and to find out conclusion and implications. In this study, the subject was consumers who visited local convenience stores such as GS25, Seven Eleven and CU last 3 months to buy PB food. Consumers' consumption pattern and culture made change to be reasonable and practical owing to aging society, nuclear family, women's entering into the society, one person household consumer, and convenient and prompt buying to make different consumption pattern and to make change of commodity distribution pattern. Convenience store took action against change of the trend to expand business area by new distribution channels to get another growth source. Private brand (PB) food that was distributor's brand was expanded. The PB product has been competitiveness of food service industry.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.8
• /
• pp.27-34
• /
• 2018

Purpose - This paper discussed and illustrated the most efficient method to calculate the distribution centers for a national project in China. Through demonstration of implementing the GIS, spatial analysis, and location calculation model, this paper mainly dealt with the construction distribution problem and inconvenient supply of materials problems. Research design, data, and methodology - In this paper, the research design structure based on three steps: implementing the Geographic Information System to locate the points coordination data, calculating the distribution centers of the project, and optimizing the most efficient and effective coordination. The data of the calculation is from an actual project. The methodology of this paper is summarizing the spatial analysis capabilities and digital graphic data calculation to locate logistics distribution centers, and since the illustration of the calculation is useful for locating the coordination, the result of this paper has certain reference values for the project construction. Results - This paper illustrates the steel and cement resource of every distribution point to confirm the most efficient distribution center location coordination. Conclusions - The integrated logistical management models are used to ensure the results for the purposes of our calculation. The result of the calculation is also a useful example for future Chinese national projects.

• The Journal of Asian Finance, Economics and Business
• /
• v.5 no.4
• /
• pp.117-125
• /
• 2018

As various types of information technology systems are becoming more pervasive than ever, many studies have evaluated the systems from the user perspective. Some of them have used surveys to measure consumers' cognitive responses to the target technology. However, this method may cause problems if the survey participants do not have a useful frame of reference for evaluating an unfamiliar system. To examine this issue, the current study empirically tested the effect of personal product knowledge on the predictability of a behavioral model, such as Technology Acceptance Model. A series of measurement invariance tests as well as multi-group comparison tests were conducted for rigorous examination of the data. Our analysis showed that the variance of attitude that is explained by the two believes (perceived usefulness and ease of use) was relatively small when the survey respondents had lower amount of product knowledge. Moreover, the group had weaker causal relationship between attitude and intention to use the technology, hindering the predictability of the research model. The results indicated that respondents should have a certain amount of knowledge of the target system in order to form accurate beliefs and behavioral decisions. The findings of this study provide important implications on sampling strategies for researchers with new technology.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.E3
• /
• pp.129-136
• /
• 2003

Effects of inorganic aerosols on the kinetics of the hydroxyl radical reactions with selected aliphatic alkanes have been investigated using the relative rate technique. The relative rates in the absence and presence of aerosols were determined for n-butane, n-pentane, n-hexane, n-octane, and n-decane. P-xylene was used as a reference compound. Inorganic aerosols including (NH$_4$)$_2$SO$_4$, NH$_4$NO$_3$, and NaCl aerosols at two different aerosol concentrations that are typical of polluted urban conditions were tested. Total surface areas of aerosols were 1400 (Condition I) and 3400 $\mu$$m^2$ cm$^{-3}$ (Condition II). Significant changes in the relative rates in the presence of the inorganic aerosols were not observed for the n-butanel/$.$OH, n-pentanel/$.$OH, n-hexanel/$.$OH, n-octanel/$.$OH, and n-decanel/$.$OH reactions versus p-xylenel/$.$OH reaction. These results suggest that the promoting effects depend on the semiconducting property of the aerosols and the nature of the organic compounds.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.330-336
• /
• 2004

Fifty-two pathogenic Vibrio parahaemolyticus strains were isolated from the environments of Busan and Yeosu, Korea. Forty-three of these strains showed protease activities, whereas 4 strains showed $\alpha / \beta$ hemolysin activities and 6 strains had urease activities. Their pathogenic factors were not overlapping except one strain, which had both protease and hemolysin activities. The 6 urease-positive strains (V. parahaemolyticus YKB4, YKB14, S25, YFB20, YFO21, and YFO22) showed the same biochemical characteristics as a reference strain [V. parahaemolyticus KCTC 2471 (urease-negative)], except for urease production. The 6 urease-positive strains showed different urease activities in their culture supernatant during the growth. The urease activity of S25 increased sharply at the late exponential phase, and was the highest at the initial stationary phase and was kept until the late stationary phase. The other 5 isolates, except C25, showed urease activities at the mid-stationary phase and increased steadily until the late stationary phase, when the urease activity was maximal. To compare the degree of virulence of V. parahaemolyticus with different pathogenic factors, hemolysin, protease, or urease-positive strains were injected into groups of 10 each of ICR mice (7- to l0-week-old males). The lethal rates of urease-positive V. parahaemolyticus, YKB14, YKB4, and S25, were significantly high, being 50, 70, and 80%, respectively. Protease-positive V. parahaemolyticus strains FM39 and FM50 showed 40% and 60% of lethal rate, respectively. Hemolysin-positive V. parahaemolyticus strains S34 and S72 had no mortality, similar to nonpathogenic V. parahaemolyticus FM12.

• Journal of International Academy of Physical Therapy Research
• /
• v.7 no.1
• /
• pp.949-955
• /
• 2016

The purpose of the study was to investigate effects of Low intensity cardiac rehabilitation, using a treadmill, on the myocardial structure. We identified the effects by analyzing changes in the rats' weights and the results of biopsies. Twenty Sprague-Dawley male rats, 50 weeks old, were randomly divided into the exercise group and the control group. myocardial infarction(MI) was induced by ligaturing their left anterior descending artery. After the acute MI induction, two rats of each group began to fall dead, therefore, eight of each group completed at the end of the experiment. We used treadmills for animals for the exercise group. This exercise group performed 30 minutes of exercise five times per week for six weeks, while the control group did not perform any exercise. No statistically significant differences in weight were found in within group comparison and between group comparison. Furthermore, we observed histological changes in the myocardium using Hematoxylin & Eosin and Masson's trichrome staining in both groups. Low-intensity exercise inhibited myocardial fibrosis, may serve as a reference in the cardiopulmonary field, which plays a role in rehabilitating patients with cardiac disorders, including acute MI.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.6
• /
• pp.644-649
• /
• 2019

Killed vaccines, developed by inactivation with formalin, have been investigated for many fish viruses. In this study, the inactivation of viral hemorrhagic septicemia virus (VHSV) by formalin was investigated based on the infectivity titer. When viral cell culture supernatants were used, the infectivity titer decreased 1,000-fold at 1 d after treatment with 0.1% (v/v) formalin, but was below the detection limit at 7 and 14 d. Moreover, neither the N nor G gene were detectable by RT-PCR immediately after formalin treatment. In western blot analysis, N protein was not detected by rabbit antiserum against VHSV KR-9225 from 2 d after formalin treatment. On the other hand, when we used a virus that was purified and concentrated ~100 times, the infectivity titer was maintained at 10^6.05 TCID₅₀/mL, even at 14 d after formalin treatment, and no change in the viral structural proteins was observed. This study provides important data on the production and use of formalin-inactivated vaccines.

• Journal of Biomedical Engineering Research
• /
• v.36 no.4
• /
• pp.135-142
• /
• 2015

Outflow cannulation site of left ventricular assist device(LVAD) chosen by considering anatomical structure of thoracic cavity and vascular system. Though outflow cannulation site influences blood perfusion at each branch, there is no standard rule or quantitative data. In this study, we computed the amount of blood perfusion at each arterial branch numerically according to outflow cannulation sites(ascending aorta, aortic arch, descending aorta). We generated computational meshes to the three-dimensionally reconstructed arterial system. Clinically measured arterial pressure were used for inlet boundary condition, porous media were applied to mimic blood flow resistance. Blood perfusion through left common carotid artery was 2.5 times higher than other cases, and that through right common carotid artery was 1.1 times higher than other branches. Although this is simulation study, will be useful reference data for the clinical study of LVAD which considers blood perfusion efficiency.