• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.579-589
• /
• 2000

The purpose of this study was to evaluate the position of tongue and hyoid bone in relation to vortical facial patterns in the adult and child. Lateral cephalograms taken in adults(63 cases, 11.7 years in average age) and children(69 cases, 22.6 years in average age) were traced and measured about position and posture of tongue and hyoid bone using the horizontal and vertical reference lines. The angle of mandibular plane to SN Plane was employed to classify the samples into groups of hypodivergent and hyperdivergent. The comparison of the tongue/hyoid bone measurements between hypodivergent group and hyperdivergent group in the adult and child were statistically executed with Student's f-test. The results were as follows, 1. The tongue height was lower in the hyperdivergent group than in hypodivergent group, and higher in children than in adults. 2. The vertical height of hyoid bone was higher in hypodivergent group than in hyperdivergent group and also higher in children than in adults. 3. The anteroposterior position was of no significant difference in relation to age or vortical facial pattern. 4. The inclination of hyoid bone in relation to cranial base was steeper in children than in adults.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.127-136
• /
• 2007

An abrupt scene-change frame is one that is hardly correlated with the previous frames. In that case, because an intra-coded frame has less distortion than an inter-coded one, almost all macroblocks are encoded in intra mode. This breaks up the rate control flow and increases the number of bits used. Since the reference software for H.264 takes no special action for a scene-change frame, several studies have been conducted to solve the problem using the quadratic R-D model. However, since this model is more suitable for inter frames, the existing schemes are unsuitable for computing the QP of the scene-change intra frame. In this paper, an improved rate control scheme accounting for the characteristics of intra coding is proposed for scene-change frames. The proposed scheme was validated using 16 test sequences. The results showed that the proposed scheme performed better than the existing H.264 rate control schemes. The PSNR was improved by an average of 0.4-0.6 dB and a maximum of 1.1-1.6 dB. The PSNR fluctuation was also in proved by an average of 18.6 %.

• Journal of the Korean Society of Safety
• /
• v.35 no.1
• /
• pp.1-11
• /
• 2020

Article 325 (Prevention of Fire Explosion due to Electrostatic) of the Rule for Occupational Safety and Health Standard specifies that in order to prevent the risk of disasters caused by static electricity, fire, explosion and static electricity in the production process, However, in order to do this, it is absolutely necessary to use a pre-detection technology and a detector for antistatic discharge prediction, which is a precautionary measure by static electricity in a fire / explosion hazard place, but in Korea, And there is no technical standard for the application of the technology of the explosion proof structure of the related equipment. Research methods include domestic and overseas electrostatic discharge detection technology and literature investigation of related equipment explosion proofing technology, domestic and foreign electrostatic discharge detection device production and use situation investigation, advanced foreign technology data analysis and benchmarking. In particular, we sought to verify the results of empirical experiments using electrostatic discharge detection technology through sample purchase and analysis of related major products, development of optimization technology through prototype production, evaluation, and supplementation, and expert knowledge through expert consultation. The results of this study were developed and fabricated two prototypes of electrostatic discharge detector based on the technology / standard related to electrostatic discharge detection technology in Korea and abroad through development of electrostatic discharge detection technology and development and production of detector. In addition, based on the development of electrostatic discharge detection technology, we developed an intrinsic safety explosion proof ib class explosion proof technology applicable to the process of using and handling flammable gas and flammable liquid vapor and combustible dust. In the case of the over voltage and minimum voltage are supplied to the explosion-proof structure ESD detector, check the state of the circuit and the transient and transient currents generated by the coil and capacitor elements during the input and standby of the signal pulse voltage. Explosion-proof equipment-Part 11: Intrinsically safe explosion proof structure The comparative evaluation with the reference curve in Annex A of "i" confirms that the characteristics of the intrinsically safe explosion protection structure are met.

• Parasites, Hosts and Diseases
• /
• v.55 no.4
• /
• pp.367-374
• /
• 2017

Despite the broad distribution of leishmaniasis among Iranians and animals across the country, little is known about the genetic characteristics of the causative agents. Applying both HSP70 PCR-RFLP and sequence analyses, this study aimed to evaluate the genetic diversity and phylogenetic relationships among Leishmania spp. isolated from Iranian endemic foci and available reference strains. A total of 36 Leishmania isolates from almost all districts across the country were genetically analyzed for the HSP70 gene using both PCR-RFLP and sequence analysis. The original HSP70 gene sequences were aligned along with homologous Leishmania sequences retrieved from NCBI, and subjected to the phylogenetic analysis. Basic parameters of genetic diversity were also estimated. The HSP70 PCR-RFLP presented 3 different electrophoretic patterns, with no further intraspecific variation, corresponding to 3 Leishmania species available in the country, L. tropica, L. major, and L. infantum. Phylogenetic analyses presented 5 major clades, corresponding to 5 species complexes. Iranian lineages, including L. major, L. tropica, and L. infantum, were distributed among 3 complexes L. major, L. tropica, and L. donovani. However, within the L. major and L. donovani species complexes, the HSP70 phylogeny was not able to distinguish clearly between the L. major and L. turanica isolates, and between the L. infantum, L. donovani, and L. chagasi isolates, respectively. Our results indicated that both HSP70 PCR-RFLP and sequence analyses are medically applicable tools for identification of Leishmania species in Iranian patients. However, the reduced genetic diversity of the target gene makes it inevitable that its phylogeny only resolves the major groups, namely, the species complexes.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.2
• /
• pp.125-132
• /
• 2018

In this study, a direct tensile test was planned to identify the tensile performance of UHPC, and the irregularity of cracks, which is a problem of the direct tensile test, was complemented through the introduction of notches at the center of a specimen. In this regard, a number of specimens divided by batch to reduce the deviation of direct tensile test values were fabricated to present reference data with respect to highly reliable direct tensile strength values. In addition, the mechanical properties and reliability of the specimens were examined under the curing conditions of the specified design strength of 120MPa for the steel fiber reinforced concrete with 1.5% fiber volume fraction, which is most suitable for the field application. As a result, the deviation of averages by batch between compressive strength and direct tensile strength did not show a large difference, and all cracks occurred within 20mm in the direct tensile test. At the 95% confidence interval of the direct tensile strength, the range was considerably small in the mean and the standard deviation, and there was no significant difference depending on the curing conditions. The results confirmed that a stable direct tensile test was performed, and highly reliable results were obtained through the fabrication of specimens by batch and test progress.

• Culinary science and hospitality research
• /
• v.21 no.3
• /
• pp.155-167
• /
• 2015

This study aims to examine the knowledge level of culinary staff members regarding the restaurant country- oforigin labeling system by developing a scale to investigate and evaluate such knowledge levels. The empirical study targeted culinary staff members with over 7 years of experience in 10 luxury hotels in Seoul who were approached through the convenience sampling method, which was conducted for 14 days from November 14th to 27th, 2014. A total of 192 self-administered questionnaires were collected, of which 186 questionnaires(93%) were used for the final analysis. For investigation and analysis, a frequency analysis was carried out to look into population statistics and the level of knowledge using the SPSS 18.0 statistics program. One-way ANOVA and t-test were carried out to investigate differences in knowledge levels of restaurant country-of-origin labeling system with reference to academic background, job position, and hotel management type. As the result, the average correct answer rate of the culinary staff members for a total of 21 questions was 39.85% and there were no significant differences based on the academic background. However, the correct answer rate was higher for respondents that held high positions and had independently managed hotels, suggesting that knowledge varied depending on job position and management type. In conclusion, it is suggested that in order to improve the level of knowledge of the restaurant country-of-origin labeling system among culinary staff members there is a need to enhance training and continuous supervision to apply the knowledge to work in future. In addition to this, this study discussed the limits of the study and the orientation of further research.

• KDI Journal of Economic Policy
• /
• v.14 no.1
• /
• pp.167-189
• /
• 1992

The most difficult problem one faces in estimating North Korea's GNP is the lack of basic national income data. In addition, there is no appropriate foreign exchange rate available to convert North Korea's GNP to dollar values. The physical indicators method is particularly useful in estimating North Korean GNP because it requires only a modest amount of data and obtains dollar GNP directly by applying a relationship between physical indicators and GNP, which is estimated from reference countries, to physical indicators of North Korea. The estimated result of North Korean GNP in 1990 is 27.1 billion dollars and per capita GNP 1,268 dollars. The trade participation ratio (Trade/GNP) implied by the GNP estimate was plausible and so was the ratio of fiscal expenditure to GNP. This paper examined the physical indicators method's logic, the quality of the North Korean data that was used in the estimation, and the plausibility of estimation result. Relatively simple data requirement, comparative ease of computation and plausible estimation results suggest that use of physical indicators method could enhance the reliability of North Korean GNP estimate.

• Journal of the Korea Concrete Institute
• /
• v.15 no.1
• /
• pp.35-42
• /
• 2003

To use ferro copper slag as aggregate in the construction, an evaluation upon the two kinds of ferro copper slag being produced was conducted to determine the basic physical, and mechanical properties, chemical component and environmental noxiousness. As a result of experiment, it was found that two kinds of ferro copper slag satisfies the physical and mechanical properties of aggregate, prescribed in KS F 2526, and that in the result of noxious heavy metal eruption test by single bach extraction, no eruption of noxious heavy metal was detected or the eruption was far below the reference value. And mortar test was conducted by replacing sand of 25, 50, 75, 100% and the performance level was presented upon reviewing the fluidity property and variable aspects of unit weight. The increase of strength in accordance with replacement rate of sand was found to be the below than the equivalent level compared to the testing specimens that did not use ferro copper slag, but those of 25% replacement rate was above than 0%. Thus, two kinds of ferro copper slag, produced in the domestic, were found to be possessing the enough physical properties to use as concrete aggregate assuming that used with sand and in particular, it was reviewed to be advantageous in manufacturing concrete or mortar that requires weight.

• Journal of Periodontal and Implant Science
• /
• v.29 no.3
• /
• pp.507-519
• /
• 1999

The ultimate objective of periodontal treatment is to stop disease progression and to regenerate destroyed periodontal tissues and thereby regain normal function. Growth factors are naturally found polypetides which stimulate many cellular activities pertaining to wound healing by acting as signal molecule in controlling cell movement, proliferation, and matrix production. Platelet derived growth factor (PDGF) is 28,000-35,000 Da molecular weight dimeric protein with 2 long positively charged polypeptide chains connected by sulfide bonds. The purpose of this study is to evaluate histologically the initial guided tissue regeneration in a periodontal defect f a beagle dog treated with a biodegradable membrane formed with polylactic acid (poly-L-lactic acid) and polyglycolic acid loaded with 200ng/$cm^2$ platelet derived growth factor. 2 beagle dogs were used in he experiment. $5mm{\times}6mm$ alveolar bone defect was formed in upper and lower canines and third premolars and a reference notch was placed. PDGF-BB non-containing membrane was used as control. Each defect was randomly assigned to the test roup or the control group. The dogs were sacrificed 3 weeks after membrane placement. Toluidine blue and multiple staining was done for histological analysis. In the 3 week specimen in the control group, no new one formation could be seen. Small amount f bone resorption below the notch could be seen. In the notch, loose connective tissue with infiltration of inflammatory cells could be seen. Also thin discontinuous new cementum could be seen and the membrane still retained its structure. Where PDGF-BB containing membrane was used, new bone formation could be seen in the notch at weeks and also continuous thin cementum could be seen. PDL cells were observed between new bone and new cementum and some were attached to bone and cementum. These results suggest that new bone and cementum formation seen when PDGF-BB loaded membrane was used was due to inhibition of downgrowth of epithelial cells and also due to continuous release of the growth factor. Further study on the resorption characteristics of the membrane nd the release characteristics of the PDGF-BB is necessary. Also, development of a membrane easier to use clinically is necessary.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.1
• /
• pp.18-27
• /
• 2009

B. thuringiensis strain LY-99 belonging to subsp. alesti (H3a3c), was isolated from Chinese tobacco warehouse and showed significantly high toxicity to Plutella xylostella. For the identification of the cry1-type genes from B. thuringiensis LY-99, an extended multiplex PCRrestriction fragment length polymorphism (PCRRFLP) method was established by using two pairs of universal primers based on the conserved regions of the cry1-type genes to amplify around 2.4 kb cry1-type gene fragments. Then the DNA fragment was cloned into pGEM-T Easy vector and digested with EcoRI and EcoRV enzymes. Through this method, a known cry1-type gene was successfully identified from the reference strain, B. thuringiensis subsp. alesti. In addition, the RFLP patterns revealed that B. thuringiensis LY-99 included a novel cry1A-type gene in addition to cry1Aa, cry1Ac, cry1Be and cry1Ea genes. The novel cry1A-type gene was designated cry1Ah2 (Genbank accession No DQ269474). An inverse PCR method was used to amplify the flank regions of cry1Ah2 gene. Finally, 3143 bp HindIII fragment from B. thuringiensis LY-99 plasmid DNA including 5' region and partial ORF was amplified, and sequence analysis revealed that cry1Ah2 gene from LY-99 showed 89.31% of maximum sequence similarity with cry1Ac1 crystal protein gene. In addition, the deduced amino acid sequence of Cry1Ah2 protein shared 87.80% of maximum identity with that of Cry1Ac2. This protein therefore belongs to a new class of B. thuringiensis crystal proteins.