• Journal of Nutrition and Health
• /
• v.53 no.2
• /
• pp.141-154
• /
• 2020

Purpose: Atopic dermatitis (AD), a typical chronic disease in children, is an allergy disease that is highly associated with food. Thus, attention to food intake is needed to prevent and manage it. Therefore, we analyzed differences in food and nutrient intakes depending on AD status in under 12-year-old children. Methods: A total of 2,690 participants were enrolled in this study from the combined 2013-2015 Korea National Health and Nutrition Examination Survey. Subjects were divided into an AD group and normal group (non-AD group). General characteristic, food and nutrients intakes, and prevalence of insufficient and excessive nutrient intake were analyzed using χ² test and regression analyses. The AD odds ratio (OR) for insufficient and excessive nutrient intakes was analyzed using multiple logistic regression analyses. Results: Food and nutrient intakes were not significantly different between the AD and non-AD groups. However, the ratio of calcium intake to recommended nutrient intake was about 70% in both groups, which can be attributed to the overall lack of calcium intake among Korean children. There were no differences in energy or nutrient intakes between the groups, but compared with Korean Dietary Reference Intakes for Koreans, the appropriate intake ratios of fat and vitamin C in the AD group were higher than those in the non-AD group. The AD OR decreased when fat was consumed at above appropriate levels and vitamin C was consumed at lower or excess levels. Conclusion: In children, AD may be related to the nutrient intake ratio of fats and vitamin C, and we speculate that these results were affected by dietary restrictions for AD management.

• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.120-125
• /
• 2010

For the measurements of an absorbed dose using the standard dosimetry based on an absorbed dose to water the variety of factors, whether big, small, or tiny, may influence the accuracy of dosimetry. The beam quality correction factor ${\kappa}_{Q,Q_0}$ of an ionization chamber might also be one of them. The cylindrical type of ionization chamber, the PTW30013 chamber, was chosen for this work and 9 chambers of the same type were collected from several institutes where the chamber types are used for the reference dosimetry. They were calibrated from the domestic Secondary Standard Dosimetry Laboratory with the same electrometer and cable. These calibrated chambers were used to measure absorbed doses to water in the reference condition for the photon beam of 6 MV and 10 MV and the electron beam of 12 MeV from Siemens ONCOR. The biggest difference among chambers amounts to 2.4% for the 6 MV photon beam, 0.8% for the 10 MV photon beam, and 2.4% for the 12 MeV electron beam. The big deviation in the photon of 6 MV demonstrates that if there had been no problems with the process of measurements application of the same ${\kappa}_{Q,Q_0}$ to the chambers used in this study might have influenced the deviation in the photon 6 MV and that how important an external audit is.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.5
• /
• pp.335-342
• /
• 2008

The bioequivalence of two carbamazepine preparations was conducted. The in vivo bioequivalence study in 20 healthy male Korean volunteers was designed by using a single dose, randomized, 2-period crossover with a 3-weeks washout period between the doses. Prior to the in vivo study, an in vitro comparative dissolution test was performed by the paddle and basket method as described in the bioequivalence guidance of the Korea Food and Drug Administration (KFDA). Based on the similar dissolution pattern between two preparations in the dissolution test, the two formulations are demonstrated to be pharmaceutically equivalent. In addition, in vivo bioequivalence test was used to reconfirm the in vitro dissolution results. In the in vivo bioequivalence study, the plasma concentrations of carbamazepine up to 144 h after the administration were determined using a validated HPLC method with UV detection and the bioequivalence between the two drug products was assessed by statistical analysis of the log transformed mean ratios of $C_{max}$, $AUC_{0-t}$ and $AUC_{0-\infty}$. The mean maximum concentration ($C_{max}$) of the test and reference were found to be $1467.0{\pm}335.8\;ng/mL$ and $1465.9{\pm}310.3\;ng/mL$, respectively. The 90% confidence intervals (C.I.) of $C_{max}$ were in the range from 0.95 to 1.05. As for the $AUC_{0-t}$ and $AUC_{0-\infty}$, test values were $110027.1{\pm}27786.4\;ng/mL{\cdpt}h$, $128807.0{\pm}34563.2\;ng/mL{\cdot}h$ and $105473.6{\pm}26496.2\;ng/mL{\cdot}h$, $125448.5{\pm}35975.5\;ng/mL{\cdot}h$, respectively. The 90% C.I. of $AUC_{0-t}$ were 0.97 to 1.10 and of $AUC_{0-\infty}$, 0.99 to 1.09 and thus were within the log 0.8-log 1.25 interval proposed by the KFDA. A two-way ANOVA showed no significant difference between the two formulations. Based on these statistical analysis, it was concluded that the test formulation is bioequivalent to the reference.

• KIISE Transactions on Computing Practices
• /
• v.22 no.10
• /
• pp.521-531
• /
• 2016

In this paper, since most business process of D-agency is being performed through some information systems, including Onnara System is a government standard operating management system, computerized accumulated in the system documentation based on, even if there is no independent job analysis system, in a judgment that can be can be tissue diagnosis, it presented a job analysis plan that leverages the existing information system. Most material is passed online in business processing between departments and between colleagues, it is returned. In situations where most information systems for such business processing is built developed, grasp the work procedures and information systems D-agency data accumulated to derive the necessary elements for job analysis quantified, and verified the validity of the element in the regression statistics.In addition, classification system (BRM, Business Reference Model) of the existing functionality that is available only Onnara System, and to establish a job analysis architecture to be able to function diagnostic departments to leverage common also in other information systems, related implement illustrating additional features of the information system, to derive a department duties value calculation formula with it, and present various job analysis plan that can actually be utilized to diagnose and derived elements department appropriate personnel.

• KIISE Transactions on Computing Practices
• /
• v.20 no.9
• /
• pp.513-518
• /
• 2014

It has become possible for small scale laboratories to interpret large scale genomic DNA, thanks to the reduction of the sequencing cost by the development of next generation sequencing (NGS). De novo assembly is a method which creates a putative original sequence by reconstructing reads without using a reference sequence. There have been various study results on de novo assembly, however, it is still difficult to get the desired results even by using the same assembly procedures and the analysis tools which were suggested in the studies reported. This is mainly because there are no specific guidelines for the assembly procedures or know-hows for the use of such analysis tools. In this study, to resolve these problems, we introduce steps to finding whole genome of an unknown DNA via NGS technology and de novo assembly, while providing the pros and cons of the various analysis tools used in each step. We used 350Mbp of Toxocara canis DNA as an application case for the detailed explanations of each stated step. We also extend our works for prediction of protein-coding genes and their functions from the draft genome sequence by comparing its homology with reference sequences of other nematodes.

• Spatial Information Research
• /
• v.15 no.2
• /
• pp.111-121
• /
• 2007

The GPS positioning offer 3D position using code and carrier phase measurements, but the user can obtain the precise accuracy positioning using carrier phase in Real Time Kinematic(RTK). The main problem, which RTK have to overcome, is the necessary to have a reference station(RS) when using RTK should be generally no more than 10km on average, which is significantly different from DGPS, where distances to RS can exceed several hundred kilometers. The accuracy of today's RTK is limited by the distance dependent errors from orbit, ionosphere and troposphere as well as station dependent influences like multipath and antenna phase center variations. For these reasons, the author proposes Network based GPS Carrier Phase Differential Positioning using Multiple RS which is detached from user receiver about 30km. An important part of the proposed system is algorithm and software development, named DAUNet. The main process is corrections computation, corrections interpolation and searching for the integer ambiguity. Corrections computation of satellite by satellite and epoch by epoch at each reference station are calculated by a Functional model and Stochastic model based on a linear combination algorithm and corrections interpolation at user receiver are used by area correction parameters. As results, the users can obtain the cm-level positioning.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.1
• /
• pp.7-13
• /
• 2020

Purpose: This study was to evaluate marginal and internal discrepancy of 3-unit fixed dental prostheses (FDP) fabricated by subtractive manufacturing and additive manufacturing. Materials and methods: 3-unit bridge abutments without the maxillary left second premolar were prepared (reference model) and the reference model scan data was obtained using an intraoral scanner. 3-unit fixed dental prostheses were fabricated in the following three ways: Milled 3-unit FDP (MIL), digital light processing (DLP) 3D printed 3-unit FDP (D3P), stereolithography apparatus (SLA) 3D printed 3-unit FDP (S3P). To evaluate the marginal/internal discrepancy and precision of the prosthesis, scan data were superimposed by the triple-scan protocol and the combinations calculator, respectively. Quantitative and qualitative analysis was performed using root mean square (RMS) value and color difference map in 3D analysis program (Geomagic control X). Statistical analysis was performed using the Kruskal-Wallis test (α=.05), MannWhitney U test and Bonferroni correction (α=.05/3=.017). Results: The marginal discrepancy of S3P group was superior to MIL and D3P groups, and MIL and D3P groups were similar. The D3P and S3P groups showed better internal discrepancy than the MIL group, and there was no significant difference between the D3P and S3P groups. The precision was excellent in the order of MIL, S3P, and D3P groups. Conclusion: Within the limitation of this study, the 3-unit fixed dental prostheses fabricated by additive manufacturing showed better marginal and internal discrepancy than the those of fabricated by subtractive manufacturing, but the precision was poor.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.2
• /
• pp.95-108
• /
• 1996

In ultrasonic testing, flaw signal from which quantitative information on flaws is determined is influenced by 3 factors : (1) the incident wavefield.produced by the transducer, (2) the scattered waves produced by flaws, and (3) the reception of the scattered waves back at the transducer. So even small changes in transducer performance due to aging or unexpected damages can produce the changes in the characteristics of flaw signal and finally the changes in the quantitative information on flaws. Thus a reliable calibration method of transducer performance is desired. Recently, theoretical models for ultrasonic testing have been employed as reference standards for the calibration of transducers which are considered as circular planar piston sources in the most of cases. But this simplification cannot be applied to partially damaged transducer which has lost their symmetry in performance, even not in appearance. Unfortunately there has been no reliable practical model which can be used for the calibration of partially damaged transducers. Here a pulse-echo testing model for partially damaged ultrasonic transducers was developed with experimental verification. The experimental responses agree very well with the theoretical prediction. So we expect that this model can be served as a theoretical reference standards for transducer calibration.

• Food Science of Animal Resources
• /
• v.28 no.3
• /
• pp.301-305
• /
• 2008

This study was carried out to develop an accurate and rapid analysis method to measure the contents of iodide and chloride in infant formula using an ion selectivity electrode. The infant formula SRM 1846 (Standard Reference Material 1846, NIST, USA) was used as a CRM (Certified reference material). Samples were dissolved in water with 3% acetic acid and filtered through filter paper and adjusted to pH 7.0 with 0.1N NaOH. At pH 7.0, the iodide content of the CRM was $1.04{\pm}0.03\;mg/kg$ compared to the specification of $1.11{\pm}0.1\;mg/kg$ of CRM, and the recovery was $93.7{\pm}2.7%$. The chloride content was $5114.3{\pm}240\;mg/kg$ compared to the specification of $4,920{\pm}300mg/kg$ of CRM, and the recovery was $103.9{\pm}4.9%$. Ion selectivity electrodes could be successful1y used to determine the concentration of iodide and chloride ions in infant formula by a simple and rapid pretreatment of sample matrixes.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.3
• /
• pp.194-201
• /
• 2020

Latency and amplitude are the measurement parameters of mismatch negativity (MMN). The values of the parameters vary sensitively with the stimulus paradigm. A paradigm using the frequency difference of sounds for the MMN study is well known. This study obtained the reference values of the parameters in healthy young adults by performing the MMN study using the frequency paradigm. The authors recruited ten healthy adults. Their average age was 25.5 years; three were female, and seven were male. On the auditory paradigm for the MMN study, the frequency of sound was 1000 Hz for the standard stimulus, and 1032 Hz for the deviant stimulus. The mean values of latency and amplitude of MMN were 202 ms and 1.88 ㎶ at Fz, 207 ms, and 1.46 ㎶ at Cz, 212 ms, and 1.10 ㎶ at C3, and 214 ms and 1.45 ㎶ at C4. There was no correlation between the latency and amplitude of MMN. This study presented the reference values of the latency and amplitude of the MMN using a standard paradigm that is easy to apply. This information may make the MMN useful for clinical applications and basic research.