• Nuclear Engineering and Technology
• /
• v.19 no.3
• /
• pp.186-191
• /
• 1987

In this paper, we suggest the simple and practical direct simulation method for the system reliability calculation In the aspect of system unavailability calculation, this method can simplify the calculation process by applying the hard-wired system fault tree. For the calculation purpose, we use the ESCAF which is developed by Mr. Laviron in France. As a consequence, we estimate the unavailability of OP$\Delta$T & OT$\Delta$T channel in W PWR plants as a value of 8.17576$\times$10$^{-9}$ from IEEE std. 500-1977's reference data. In our calculation, the processing time is no more than 25 sec.

• Journal of Welding and Joining
• /
• v.16 no.3
• /
• pp.55-63
• /
• 1998

Among the position sensing methods available, the arc sensor which utilizes the electrical signal obtained from the welding arc itself is one of the most prevalently used methods, because it has an advantage that no particular sensing device is necessary and real-time sensing of a groove position is possible directly under the arc. The authors have already developed a seam tracking system that contains a new arc sensor algorithm, which uses the relative welding current variation according to the tip-to-workpiece distance in GMA welding. In this study a torch height control algorithm for automatic weld seam tracking was proposed for completing the previous system, which uses an on-off control technique. To implement the torch height control algorithm during weld seam tracking the system parameters which include 2nd averaging range, weighting factor for 2nd moving averaging, and Z-directional basic compensation distance were determined by experimental analysis. Finally the two different height control methods, one is simple on-off control and the other on-off control using a reference current value , were compared in their tracking abilities.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.3831-3851
• /
• 2015

This paper is concerned with the problem of joint resource allocation and user-pairing in virtual MIMO SC-FDMA systems to improve service quality of experience (QoE). No-reference logarithmic model is introduced to quantify service experience for each user and the objective is to maximize sum of all user's mean of score (MOS). We firstly formulate the optimal problem into an S-dimensional (S-D) assignment problem. Then, to solve this problem, the modified Lagrangian relaxation algorithm is deduced to obtain the suboptimal result of joint user-paring and subchannel allocation. The merits of this solution are as follows. First, the gap between its results and the global optimal one can be quantified and controlled by balancing the complexity and accuracy, which merit the other suboptimal algorithms do not have. Secondly, it has the polynomial computational complexity and the worst case complexity is O(3LN³), where L is the maximum iteration time and N is the number of subchannels. Simulations also prove that our proposed algorithm can effectively improve quality of experience and the gap between our proposed and the optimal algorithms can be controlled below 8%.

• Food Science and Biotechnology
• /
• v.17 no.4
• /
• pp.829-832
• /
• 2008

A multiplex polymerase chain reaction (PCR) method was developed to simultaneously detect 4 varieties of genetically modified (GM) cotton. The event-specific primers were used to distinguish the 4 varieties of GM cotton (MON1445, MON15985, MON88913, and LLcotton25) using multiplex PCR. The acyl carrier protein 1 (Acp1) gene was used as an endogenous reference gene of cotton in the PCR detection. The primer pair Acp1-AF/AR containing a 99 bp amplicon was used to amplify the Acp1 gene and no amplified product was observed in any of the 13 different plants used as templates. This multiplex PCR method allowed for the detection of event-specific targets in a genomic DNA mixture of up to 1% GM cotton containing MON1445, MON15985, MON88913, and LLcotton25.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.36-38
• /
• 2004

This paper presents an application of parallel hybrid Genetic Algorithm-Tabu Search (GA-TS) algorithm to search an optimal solution of a recokiguration in distribution system. In parallel hybrid CA-TS, after CA operations, stings which are not emerged in the past population are selected in the reproduction procedure. After reproduction operation, if there are many strings which are in the past population, we add new random strings into the population, if there's no improvement for the predetermined iteration, local search procedure is executed by TS for the strings with high fitness function value. To show the usefulness of the proposed method, developed algorithm has been tested and compared on a distribution system in the reference paper.

• Mass Spectrometry Letters
• /
• v.10 no.3
• /
• pp.93-101
• /
• 2019

Algorithms and software for predicting tandem mass spectra have been developed in recent years. In this work, we explore how distinct in silico $MS^2$ spectra are predicted for isomers, i.e. compounds having the same formula and similar molecular structures, to differentiate between them. We used the CFM-ID 2.0/3.0 predictor with regard to (a) test compounds, whose experimental mass spectra had been randomly sampled from the MassBank of North America (MoNA) collection, and to (b) the most widespread isomers of test compounds searched in the PubChem database. In the first validation test, in silico mass spectra constitute a reference library, and library searches are performed for test experimental spectra of "unknowns". The searches led to the true positive rate (TPR) of ($46-48{\pm}10$)%. In the second test, in silico and experimental spectra were interchanged and this resulted in a TPR of ($58{\pm}10$)%. There were no significant differences between results obtained with different metrics of spectral similarity and predictor versions. In a comparison of test compounds vs. their isomers, a statistically significant correlation between mass spectral data and structural features was observed. The TPR values obtained should be regarded as reasonable results for predicting tandem mass spectra of related chemical structures.

• Steel and Composite Structures
• /
• v.11 no.3
• /
• pp.207-223
• /
• 2011

The results of an experimental investigation are presented in this paper for retrofitting of shear damaged reinforced concrete beams by using U shaped CFRP strips. The experimental program is consisted of seven shear deficient T cross sectioned 1/2 scale simply supported beam specimens. One beam was used as reference specimen, and the remaining six specimens were tested in two stages. At the first stage, specimens were shear damaged severely, and then were retrofitted by using CFRP strips with or without fan type anchorages. Finally, retrofitted beams were tested up to failure. Three different CFRP strip spacing were used such as 125 mm, 150 mm, and 200 mm. The effect of anchorages on shear strength and behavior of the retrofitted specimens is investigated. CFRP strips without anchorages improved the shear strength, but no flexural failure mode was observed. Specimens showed brittle shear failure due to peeling of CFRP strip from RC beam surface. Shear damaged specimens retrofitted with anchoraged CFRP strips showed improved shear strength and ductile flexural failure. Maximum strains at anchoraged strips were approximately 68% larger than that of strips without anchorages.

• Structural Engineering and Mechanics
• /
• v.46 no.4
• /
• pp.459-486
• /
• 2013

A novel damage classification method based on wavelet packet transform and statistical analysis is developed in this study for structural health monitoring. The response signal of a structure under an impact load is normalized and then decomposed into wavelet packet components. Energies of these wavelet packet components are then calculated to obtain the energy distribution. Statistical similarity comparison based on an F-test is used to classify the structure from changes in the wavelet packet energy distribution. A statistical indicator is developed to describe the damage extent of the structure. This approach is applied to the test results from simply supported reinforced concrete beams in the laboratory. Cases with single and two damages are created from static loading, and accelerations of the structure from under impact loads are analyzed. Results show that the method can be used with no reference baseline measurement and model for the damage monitoring and assessment of the structure with alarms at a specified significance level.

• Safety and Health at Work
• /
• v.5 no.4
• /
• pp.198-202
• /
• 2014

Background: The economy is being lifted by the new concept of robotics, but we cannot be sure of all the possible benefits. At this early stage, it therefore becomes important to find out the possible benefits/limitations associated with robotics, so that the positives can be capitalized, established, and developed further for the employment and motivation of employees in the health care sector, for overall economic development. The negatives should also be further studied and mitigated. Methods: This study is an exploratory research, based on secondary data, such as books on topics related to robotics, websites, public websites of concerned departments for data and statistics, journals, newspapers and magazines, websites of health care providers, and different printed materials (brochures, etc). Results: The impact of robotics has both positive and negative impacts on the employment and motivation of employees in the retail sector. So far, there has been no substantial research done into robotics, especially in the health care sector. Conclusion: Replacing employees with robots is an inevitable choice for organizations in the service sector, more so in the health care sector because of the challenging and sometimes unhealthy working environments, but, at the same time, the researchers propose that it should be done in a manner that helps in improving the employment and motivation of employees in this sector.

• Asian Journal for Public Opinion Research
• /
• v.10 no.4
• /
• pp.293-315
• /
• 2022

Health care has become a rapidly growing industry where the role of nurses as a group of emotional labor employees is central and prone to burnout. The purpose of this study was to examine the role of supervision in moderating burnout caused by the effect of work intensity, customer contact, and self-efficacy, where the moderating role of supervision on burnout with its various predictors is still unstable. This quantitative study was based on research samples collected through questionnaires from 131 hospital nurses spread over two different locations. The questionnaire asked about supervision, work intensity, customer contact, self-efficacy and burnout used a Likert scale, which was then analyzed using SEM-PLS. The results indicated that work intensity and self-efficacy had a significant effect on burnout, while customer contact had no significant effect on burnout. Supervision as a moderator only significantly moderates the effect of work intensity on burnout, while supervision is not significant as a moderating variable on the effect of customer contact and self-efficacy on burnout. This study can contribute to the development of theories about burnout and practically can be used as a reference by policy makers in enhancing the role of supervision for nurses in hospitals.