Cho, Soohyun;Kang, Sun Moon;Seong, Pilnam;Kang, Geunho;Kim, Yunseok;Kim, Jinhyung;Lee, Seounghwan;Kim, Sidong
Food Science of Animal Resources
/
v.36
no.1
/
pp.68-76
/
2016
This study was conducted to investigate the meat quality and sensory properties of 12 major cuts from 10 Hanwoo bulls (25-32 mon of age) after they were aged at 2℃ for 0, 7, 14, and 21 d. Protein content (%) was between 19.17 and 22.50%. Intramuscular fat content ranged from 2.79 to 8.39%. The collagen content of the chuck roll, chuck tender, and short plate muscles was higher (1.97-2.04%) than that of the striploin muscles (1.48%) (p<0.05). CIE lightness (L*) values increased with an increase in aging days for tenderloin, loin, chuck roll, oyster blade, short plate, top sirloin, and eye of round muscles (p<0.05). Most muscles, except the short plate, showed no significant changes in redness CIE (a*) and yellowness (b*) color values during aging. The tenderloin, loin, and striploin showed significantly higher water holding capacity (58.60-62.06%) than that of chuck roll and short plate (53.86-57.07%) muscles (p<0.05). The Warner-Bratzler shear force values of most muscles decreased significantly as the aging period increased (p<0.05), exception the tenderloin. The chuck tender muscles showed the highest cooking loss, whereas tenderloin muscle showed the lowest (p<0.05). The tenderloin muscle had the longest sarcomere length (SL) (3.67-3.86 μm) and the bottom round muscle had the shortest SL (2.21-2.35 μm) (p<0.05). In the sensory evaluation, tenderness and overall-likeness scores of most muscles increased with increase in aging days. The tenderloin and oyster blade showed relatively higher tenderness and overall-likeness values than did the other muscles during the aging period. No significant differences were noted in juiciness and flavor-likeness scores among muscles and aging days.
In this paper, this author studied the realization of Daesoonjinri's Haewon Sangsaeng(解冤相生) in this world, for instance discussed the meaning of Daesoonjinri's Haewon Sangsaeng, a world construction with Haewon Sangsaeng, its practical action for the realization of Haewon Sangsaeng, and so forth. A description of the contents is as follows. Daesoonjinri's Haewon Sangsaeng eliminates the resentment of human destiny, and provides the grounds that we peoples can live with, going to help each other. And then the realization of Daesoonjinri's Haewon Sangsaeng in this world will require us to this society. Really Sangje(上帝) wanted to perform it in this world, and has performed it with a reorganizing in the order of heaven and the earth(天地公事). In response to the deeper sublimest will of Sangje, we humans can not help but do as follows: When Sangje has done a reorganizing in the order of heaven and the earth, we humans should participate in it. This is our response to the will of Sangje who wants to build an ideal society in this world. And in oder to participate in a reorganizing in the order of heaven and the earth, we humans should look up Sangje with Sincerity(誠), Reverence(敬), and should practice the words of Sangje with Faith(信). This kind of thing is a route that we should avoid Jeokwon Sanggeuk(積怨相克) and should perform Haewon Sangsaeng. This Haewon Sangsaeng can be achieved with no Chuck(無慼), an altruistic, no greed(無慾), an execution of asceticism(修道), and the practice of Podeok (布德)·Rehabilitation(敎化). No making of a Chuck, doing an altruistic, no greed, an execution of asceticism would not deceive others, would not murder others, would not blame the transgressions of others, would not discriminate, would not harm others. And Podeok·Rehabilitation should be performed well in practice. When performing Podeok and Rehabilitation, we should not nullify them as unjust words or undue actions, and we must be a true. Because we must make the words of Sangje inform a world wide well, and must convince the words of Sangje to peoples so that they can adhere to them with a faith. That's the way that we humans should participate in a reorganizing in the order of heaven and the earth in this current world, and the way that we should contribute to building the ideal society in the world.
In order to analysis the degradation process of epoxy/glass fiber for outdoor condition, FRP laminate was exposed to high temperature and water. Then the degradation process was evaluated by comparing contact angle, surface potential decay, and surface resistivity. For the change of wettability, the contact angle of thermal-treated specimen with the high temperature of $200^{\circ}C$ increased. But that of water-treated specimen decreased. The characteristic of surface potential decay shows the tendency of the remarkable decrease on water-treated specimens, but no difference on thermal-treated specimen compared with untreated one. Also, for the surface resistivity, it shows the same trend compared with the change of contact angle.
We developed an inductively coupled plasma (ICP) etcher for GaN etching using a parallel plasma electrode source with a multifunctional chuck matched to it in order for the low power consumption and low process cost in comparison with the conventional ICP system with a helical-type plasma electrode source. The optimization process condition using it for the micro light-emitting diode (µ-LED) chip fabrication was established, which is an ICP RF power of 300 W, a chuck power of 200 W, a BCl3/Cl2 gas ratio of 3:2. Under this condition, the mesa structure with the etch depth over 1 ㎛ and the etch angle over 75° and also with no etching residue was obtained for the µ-LED chip. The developed ICP showed the improved values on the process pressure, the etch selectivity, the etch depth uniformity, the etch angle profile and the substrate temperature uniformity in comparison with the commercial ICP. The µ-LED chip fabricated using the developed ICP showed the similar or improved characteristics in the L-I-V measurements compared with the one fabricated using the conventional ICP method
Litrex Ink Jet equipment offers prospect for reliable and low cost manufacturing process for PLED technology. The design concept of 140P system that we are developing meets requirement of process/equipment for PLED manufacturing line in terms of higher mechanical accuracy, in-line monitoring system of print head, high precision of process capability, reasonable through-put, high reliability/easier maintenance and no particle generation.
Park, S.J.;Kwak, J.H.;Park, J.;Lee, H.Y.;Moon, S.E.;Park, K.H.;Kim, J.;Kim, G.T.
Journal of Sensor Science and Technology
/
v.17
no.2
/
pp.147-150
/
2008
Multiple ZnO nanorod device detecting $NO_2$ gas was fabricated by sol-gel growth method and gas response characteristics were measured as a chemical gas sensor. The device is mainly composed of sensing electrode and sensing nano material. To acquire high sensitivity of the device for $NO_2$ gas it was heated by a heat chuck up to $400^{\circ}C$ The sensing part was easily made using the CMOS compatible process, for example, the large area and low temperature nano material growth process, etc. The sensors were successfully demonstrated and showed high sensitive response for $NO_2$ gas sensing.
This study was conducted to investigate the compositional properties by different cut of Hanwoo steer beef. 10 cuts [Abjin (short plate), Bosup (top sirloin), Cheggt (striploin), Dngsim (Ioin), Guri (chuck tender), Hongduke (eye of round), Moksim (chuck roll), Sulgit (bottom round), Udoon (top round), Yangji (brisket)] were prepared from 10 Hanwoo steers ($24{\sim}28$ mon old) were used for the experiment. Calorie contents were $2,205{\sim}3713.20\;cal/g$ and loin, striploin, short plate were significantly higher than the other cuts (p<0.05). Loin was highest in cholesterol content, whereas top round and eye of round were lowest among 10 cuts (p<0.05). There were no significant differences in soluble and insoluble collagen contents although chuck tender, chuck roll and bottom round contained significantly higher total collagen and loin and striploin contained significantly lower total collagen contents than the other cuts (p<0.05). The result from the analysis of free amino acids showed that glutamate and alanine contents were $275.99{\sim}536.04\;mg/100g$, $130.63{\sim}175.23\;mg/100g$, respectively and followed by arginine ($7.00{\sim}10.49\;mg/100g$), phenylalanine ($4.70{\sim}13.88\;mg/100g$), and leucine ($5.98{\sim}10.26\;mg/100g$) in 10 cuts. $1^{++}$ grade Hanwoo steer beef had significantly higher IMP (Inosine monophosphate) and inosine in eye of round (30.04% and 6.25%) and top round (33.44% and 6.28%), while hypoxanthine contents were significantly higher in chuck tender than the other cuts (p<0.05). In fatty acid analysis, there were not significantly differences in fatty acid composition among 10 cuts only except for C16:1n7, C20:3n6, and C20:4n6 (p>0.05).
Distribution of wholesale carcass cuts and tissues was studied in Omani Dhofari bulls and steers raised under intensive management and slaughtered over a range of 110 to 210 kg body weight. The fore quarter of Dhofari cattle carcasses was heavier than the hind quarter with the chuck being the heaviest cut in the half carcass followed by the round whereas the flank was the lightest cut. Proportions of the fore quarter and its cuts increased whereas that of the hind quarter and its cuts decreased with increasing carcass weight. The fore quarter contained higher proportions of carcass tissues especially intermuscular fat than the hind quarter. The chuck and round contained the highest proportions of lean and bone and the flank the least. There was a general trend of increasing proportions of fat and decreasing proportions of lean and bone in carcass cuts and fore and hind quarters with increasing slaughter weight and age. As % total body fat (TBF), total carcass fat (TCF) increased whereas total non-carcass fat (TNCF) decreased. The largest proportion of TBF was deposited in the intermuscular site. Among the TNCF depots, the kidney and omental contributed the highest proportions whereas the pelvic and channel were the lowest. Proportions of M. rhomboideus and M. splenius increased in the half carcass whereas that of M. semitendinosus decreased as the cattle increased in size. The axial skeleton contributed 47.4-51.1, the fore limb 21.6-22.6 and the hind limb 23.9-26.2% of the total carcass bone. Proportions of axial skeleton increased whereas that of fore and hind limbs decreased with increasing slaughter weight and age. There were no major effects of castration on the distribution of weight of carcass cuts or carcass tissues. Steers had higher total body fat at 160 kg body weight and higher proportions of mesenteric, scrotal, pelvic, kidney and total non-carcass fat at 210 kg weight than bulls. As % of total body fat, steers fad significantly higher kidney and total non-carcass fat. There was little effects of castration on proportions of dimensions of individual muscles or bones.
It has been used many kinds of horizontal butt-welding methods at block-to-block erection stage in shipbuilding companies. For examples, some companies use conventional FCA W process with one side or both sides groove joint welding, others use carriage with torch holder type mechanized welding method. Although lots of efforts were done until now, some problems in quality and productivity still remain in ship's hull welding. In this study, we have attempted to raise productivity and quality on horizontal position of welding with following 3 items. 1) Prepare groove condition with no root gap for making easy fit-up work. 2) Develop improved MAG (100% $CO_2$ gas shielding) welding process with solid wire for making sound root bead from one side. 3) Develop and apply quite new automatic welding carriage. The stability of new welding process was confirmed by conducting mechanical tests of weldments to verify the soundness of weldments.
This study was conducted to investigate the proximate composition, meat color, Warner-Bratzler shear force (WBS), total collagen content (%), cooking loss (CL), fatty acid composition, amino acid composition, and mineral content of loin, strip loin, top round, and chuck tender Hanwoo beef and imported Australian beef. Protein content was significantly lower for strip loin and loin of Hanwoo QG $1^+$ and 1 beef when compared to that of Australian black Angus or cross beef (p < 0.05), whereas it was not significantly different for top round and chuck tender. Intramuscular fat content was higher for QG $1^+$ Hanwoo beef strip loin (15.48%) than that in Australian cross beef (8.83%) and it was also higher in loin for QG $1^+$ (17%) and 1 (15.52%) Hanwoo beef than that in Australian Angus beef (10.59%) and cross beef (9.21%) (p < 0.05). The CIE $L^*$ value was significantly higher for Australian cross beef strip loin than that of Hanwoo beef but the CIE $a^*$ value was not significantly different between the same cuts from different origins. However, CIE $b^*$ values were significantly higher for the Australian cross beef than those for four cuts of Hanwoo beef and Australian Angus beef (p < 0.05). No significant difference in WBS of loin, top round, or chuck tender was observed among the different beef sample origins except that strip loin had significant higher WBS for Australian cross beef (3.02 kg) but lower for Australian Angus beef (2.13 kg). Australian cross beef contained significantly higher palmitic acid, stearic acid, linolenic acid, but lower palmitoleic acid, oleic acid, eicosenoic acid content in strip loin, loin, and top round than those of QG $1^+$ and 1 Hanwoo beef (p < 0.05). QG $1^+$ Hanwoo beef had significant lower saturated fatty acid and higher monounsaturated fatty acid content than those in Australian cross beef (p < 0.05). Hanwoo $1^+$ beef had more glycine in top round and chuck tender, whereas Hanwoo QG 1 beef and Australian Angus beef had higher cysteine, methione, and glycine levels in strip loin and loin and valine and leucine in top round and chuck tender than the same cuts of Hanwoo $1^+$ beef (p < 0.05). No significant differences were observed for Ca, Fe, or Zn content among the different beef samples.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.