• Journal of Environmental Science International
• /
• v.5 no.1
• /
• pp.71-81
• /
• 1996

Direct Sky Blue-5B is an Azo dye known as general for staining of textile and leather, etc., and as materials which are difficult to be biodegraded in nature. The bacterium strain which could degrade direct Sky Blue-5B was isolated from activated sludge of dyeing factory and identified as Proteus sp. by experiment on morphological, cultural and biochemical characteristics, and so named Proteus sp. ST-1. The optimum condition of the strain for degradation of Sky Blue-5B were at about 35$^{\circ}C$ and PH 7~8. The strain had been capable of degradation with organic nitrogen effectively and had completely degraded 200mg/1 of the dye within 12hrs at 37$^{\circ}C$. The enzyme system related to degradation of Azo dye may be intracellular, and so degraded the dye after absorption into cell. The degradation products of Sky Blue-5B by Proton sp. 57-1 were analyzed by Gas Chromatography /Mass Spectrometry and Spectrophotomer, from this observation, it may be infered that the strain degraded the dye directly without any mediate.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.4
• /
• pp.619-624
• /
• 1995

Sesame protein concentrate(SPC) was prepared from defatted sesame flour(DSF) at several different pH(2.0, 7.0, 9.0, 11.0) for protein extraction. Some of their functional properties were determined in order to compare the effects of pH during preparation of concentrates. Compared with DSF, nitrogen solubility was markedly improved in all SPC, and SPC extracted at pH 11.0 showed the highest solubility at all pH leaves examined. Fatabsorption was increased in all SPC prepared, but water absorption was decreased as the extraction pH of protein increased. The emulsifying properteis and foaming properties of SPC were remarkably higher than DSF. As the extraction pH of protein was increased, the emulsion activity was also increased, but emulsion stability was decreased. SPC extracted at pH 7.0 showed the highest foaming capacity on the other hand, the highest foaming stability was shown in SPC extracted at pH 2.0. As the protein extraction pH increased, the viscosity of the protein solution was increased. SPC extracted at pH 11.0 showed highest viscosity at all protein concentrations tested.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2003.11a
• /
• pp.89-90
• /
• 2003

Effects of interaction of dietary soybean oil with NaHCO$_3$on the energy metabolism and antioxidants enzyme activity in broiler chicks during acute phase response was studied, Broiler chicks 10 d-old were fed on diets containing 5.0 ％ of soybean oil with or without 0.5 ％(60 meq/kg) of NaHCO$_3$. Then acute phase response were induced by injecting Salmonella typhymurium lipopolysacharide(LPS) In saline 3 times i.p. at alternative day on 16-d of age. Dietary soybean oil with NaHCO$_3$lessened the performance(growth, feed efficiency, calcium balance, excretion of uric acid, and nitrogen balance) -suppressing effect of the LPS effect, but enhanced metabolizable energy value of diet due to increased digestive absorption of energy sources and phosphoruse balance, and decreased activities of SOD in erythrocyte cytosols and circulating ceruloplasmin in plasma. The results indicated dietary energy utilization and electrolytes levels may interact with the antioxidants systems during acute phase response.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.1
• /
• pp.19-24
• /
• 2001

A solvent sublation has been studied for the determination of trace Au(III), Pt(IV) and Pd(II) in waste water with their complexes of 2-mercaptobenzothiazole (MBT). Experimental conditions such as the concentration of HCl, the amount of MBT as a ligand, the type and amount of surfactants, bubbling rate and time, and the type of organic solvent were optimized for the solvent sublation, i.e., 25.0 mL of 2.0 M HCl solution and 30mL of 0.4%(w/v) MBT ethanolic solution were added to a 1.0 L sample to form stable complexes. The addition of 4.0 mL of 1 ${\times}$$10^{-3}$ M CTAB (cetyltrimehtylammonium bromide) solution was needed for the effective flotation accomplished by bubbling nitrogen gas at the rate of 40.0 mL/min for 35 minutes. As a solvent, 20.0 mL of MIBK (methylisobuthylketone) was used to extract the floated complexes. The procedure was applied to three kinds of waste waters. Au(III) was determined as 0.68 ng/mL and 0.98 ng/mL respectively for final washed water of two plating industries in Banwol. Pd(II) and Pt(IV) were not detected in any of the three samples. The recovery, which was obtained with analyte-spiked samples, were 95-120%.

• Journal of Radiation Industry
• /
• v.4 no.3
• /
• pp.271-276
• /
• 2010

Epoxy resin has wide application in various industrial fields because of their good mechanical strength, superiority adhesion and low shrinkage etc. And the typical curing method for epoxy resins is thermal and press compaction. However, a curing method was used electron beam process in this study. Epoxy acrylate was fabricated from mixture of epoxy, acrylic acid, tetraphenylporphyrin (TPP) and hydroquinone monomethyl ether (MEHQ) with mole ratios. Then electron beam irradiation effect on the curing of the epoxy acrylate resin was investigated various absorption dose in nitrogen atmospheres at room temperature. The dynamic mechanical and thermal properties of the irradiated epoxy acrylate resins were characterized using dynamic mechanical analysis (DMA) and thermogravimetric analyzer (TGA). And the tensile and flexural strength were measured by an universal tensile machine (UTM).

• Bulletin of the Korean Chemical Society
• /
• v.20 no.9
• /
• pp.1067-1072
• /
• 1999

Structures of unprotonated [(NH3)n+(n = 1-6)] and protonated [NH4+(NH3)n-1(n = 1-6)] ammonia cluster cations have been optimized with ab initio Hartree-Fock (HF) and second-order MФller-Plesset (MP2)/6-31+G ** levels and the harmonic vibrational frequencies have also been evaluated. In unprotonated cluster cations, NH3+ forms as a central core of the first ammonia solvation shell. In protonated cluster cations, NH4+ forms as a central core. In unprotonated dimer and trimer cations, there are two types of isomers (hydrogen-bonded and head-to-head interactions). In both cluster cations, the hydrogen-bonded isomers are more stable. In the hydrogen-bonded dimer cation, the proton transfer reaction takes place from (NH3-HN+H2) to (NH4+-NH2). But in the other unprotonated cluster cations, the proton transfer does not take place. In unprotonated pentamer and hexamer, a NH3+ core has both interactions in a complex. On the other hand, in unprotonated tetramer a core has only the hydrogen-bonded type combined with neutral ammonia molecules. With increasing cluster cation size, the bond lengths [R(NN)] between two nitrogen atoms and the distances [R(N ...H)] of the hydrogen-bond increase reg-ularly. In the calculated infra-red absorption bands for ammonia cluster cations, the characteristic peaks of the bridged NH vibration of the hydrogen-bonded clusters appear near 2500 cm-1 . With increasing size, the peaks shift from 2306 cm-1 to 2780 cm-1 .

• Bulletin of the Korean Chemical Society
• /
• v.16 no.7
• /
• pp.582-588
• /
• 1995

The preconcentration and determination of trace Cd(Ⅱ), Cu(Ⅱ), Pb(Ⅱ), Mn(Ⅱ) and Zn(Ⅱ) in water samples were studied by the precipitate flotation using La(OH)3 as a coprecipitant. The analytes were quantitatively coprecipitated by adding 3.0 mL of 0.1 M La(Ⅲ) solution in a 1,000 mL water sample and adjusting the pH to 9.5 with NaOH solution. After the addition of the 1:8 mixed surfactant solution of each 0.1% sodium oleate and sodium lauryl sulfate, the solution was stirred with a magnetic stirrer for 10 minutes. The precipitates were floated to the surface by bubbling with nitrogen gas and collected in a small sampling bottle. The precipitates were dissolved in nitric acid and then the solutions were diluted to 25.00 mL with a deionized water. The analytes were determined by flame atomic absorption spectrometry. This procedure was applied to the waste water analysis. This technique was simple, convenient and especially rapid for the analysis of a large volume of sample. And also, from the recoveries of better than 92% which were obtained from real samples, this method could be judged to be applicable to the preconcentration and quantitative determination of trace elements in water samples.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.3
• /
• pp.185-191
• /
• 2021

Environmental pollution is defined as contamination of the earth's environment with materials which interfere with human health, quality of life, or the natural functioning of the ecosystem. Whenever a prolonged and repetitive exposure to environmental stressors exceeds the skin's normal defensive potential, there is a disturbance in the skin barrier function leading to the development of various skin diseases. Major air pollutants which affect the skin are polycyclic aromatic hydrocarbons, volatile organic compounds, nitrogen oxides, particulate matter, cigarette smoke, heavy metals and arsenic. Dermal uptake depends on the deposition of air pollutants on the skin surface, the composition of epidermal lipids, and the diffusion through the epidermis to the blood vessels.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.6
• /
• pp.83-88
• /
• 2003

The woodceramics are porous amorphous carbon and glassy carbon composite materials. Woodceramics attracted a lot of attention in recent years because they are environmentally friendly and because of their unique functional characteristics such as catalysis, moisture absorption, deodorization, purification, carrier for microbial activity, specific stiffness, corrosion and friction resistance, and their electromagnetic shielding capacity. In this paper, we made new products of clay-woodceramics to investigate the industrial analysis and ethylene gas adsorption for basic data of building- and packging- materials keeping fruit fresh for a long time. Clay-woodceramics were carbonized for 3 h of heating in a special furnace under a gas flow of nitrogen(15 ml/min.) from 3 layers-clay-woodparticleboard made from pallet waste wood, phenol- formaldehyde resin(hereafter PF, Non volatile content:52%, resin content 30%), and clay(10%, 20% and 30%). Carbonization temperature was 400℃, 600℃ and 800℃. Experimental results shows that the higher the carbonization temperature, the higher the fixed carbon and the lower the volatile contents. The higher the clay content, the more the ash content. The higher the carbonization temperature, the more the ethylene gas adsorption. Carbonization temperature of 800℃ gave the best reslts as same as that of white charcoal and activated carbon.(800℃-clay-woodceramic: 5.36 ppm, white charcoal: 5.66 ppm, activated carbon: 5.79 ppm) The clay contents did not make difference of ethylene gas adsoption.

• Korean Journal of Agricultural Science
• /
• v.49 no.3
• /
• pp.441-450
• /
• 2022

This study explored the effects of milk flavor (MF) supplementation on growth efficiency, nutrient absorption, fecal score, and blood profiles in weaning piglets. A total of 80 (21 days old) crossbred ([Yorkshire × Duroc] × Landrace) healthy weaned piglets with an initial body weight (BW) of 7.05 ± 1.22 kg were randomly allotted to one of two nutritive treatments with 8 repetitions and five pigs (2 female and 3 male) per pen. The experiment was divided into 2 phases (d 0 - 21, and d 21 - 42), and the dietary treatments consisted of TRT1, basal diet, TRT2 and basal diet + 1.0 g·kg^-1 MF. At days 21 - 42 and the overall period, the average daily gain (ADG) and average daily feed intake (ADFI) increased (p < 0.05) by receiving the MF added feed. However, MF inclusion did not impact (p > 0.05) the feed efficiency (G : F) throughout the entire experiment. Piglets consuming the MF supplemented diet showed that the apparent total tract digestibility of dry matter (DM), nitrogen (N) and energy (E) did not vary significantly (p > 0.05) between the treatments. All through the experiment, the fecal score and blood profile of the piglets fed the flavor diet also remained unaffected (p > 0.05). In conclusion, MF addition to the diet of the piglets increased their body weight and had no adverse effects on nutrient utilization, fecal score, and blood profile. Thus, MF addition could improve the performance outcomes of weaning piglets.