• 멤브레인
• /
• 제28권1호
• /
• pp.31-36
• /
• 2018

본 연구에서는 막결합생물반응조(MBR)공법을 비롯한 하수고도처리공법에서 유입하수량의 변화에 따른 슬러지 특성 변화를 파악하고자 하였다. 일 1.5톤을 처리하는 모형실험시설에서 설계유량 대비 유입하수량을 100, 70, 40, 10%로 변화시켜가며 이에 따른 비탈질속도(specific denitrification rate)와 비질산화속도(specific ammonia oxidation rate)의 변화를 측정하였다. 각 공법의 폭기조에서 채취한 슬러지의 비질산화속도는 유입하수량 100% 조건에서 세 가지 공법 모두 유사한 값($0.10gNH_4/gMLVSS/day$)으로 측정되었다. 유입하수량이 70%에서 40%로 감소함에 따라 비질산화속도가 크게 감소하는 경향을 나타냈다. 비탈질속도 역시 유입하수량이 감소함에 따라 최대 50%가량 감소하였다. 유입하수량이 감소할수록 비탈질속도와 비질산화속도가 감소하는 경향을 나타냈으나 원수의 총질소 농도와 반응조 내 미생물 농도를 고려하면 질소제거율에 영향을 미칠 정도는 아니었다. 따라서 유입하수량이 감소하는 경우에도 반응조 내 미생물 농도를 높게 유지할 수 있다면 안정적인 질소 제거가 가능할 것으로 판단된다.

• 한국물환경학회지
• /
• 제24권5호
• /
• pp.563-568
• /
• 2008

In petroleum refining industry, caustic (NaOH) solution is used to remove $H_2S$ from hydrocarbon streams in naphtha cracking process. Once $H_2S$ is absorbed in caustic solution, the solution becomes known as spent sulfidic caustic (SSC), which contains high concentrations of hydrogen sulfide and alkalinity. This study was focused on the evaluation of autotrophic denitrification by SSC in a hybrid Bardenpho process. SSC was injected to the anoxic (1) and anoxic (2) tank at different S/N ratio. In a previous lab-scale study, as we operated a modified Ludzack-Ettinger process, it was observed that the COD increment of effluent and nitrification failure happened because of non-biodegradable matters in SSC and high pH, respectively. Thus cilia media was packed at 2.4%(v/v) in all aerobic tanks and the pH of SSC was neutralized from 13.3 to 11.5 with addition of sulphuric acid ($H_2SO_4$). Consequently, these strategies were successful because no COD increment of effluent was observed and nitrification failure did not happen. The maximum TN removal efficiency was 77.5% when SSC was injected to both the anoxic (1) and anoxic (2) tanks. The mean TN concentration of effluent in this condition was 5.8 mg/L.

• 한국물환경학회지
• /
• 제39권5호
• /
• pp.390-395
• /
• 2023

The feasibility of applying the shortcut nitrogen removal process to treat livestock wastewater on individual farms was examined, and appropriate operating parameters were established. As a result,, it was determined that the nitrification reaction was carried out under 550 mg/L of ammonium nitrogen concentration, but it was less effective under conditions of high ammonia concentration. Consequently, it was confirmed that a partial injection of inflow water was necessary to minimize the effects of ammonia toxicity. Following the sequential batch reactor (SBR) operation results, it was difficult to achieve the effluent quality standard without an external carbon source. Also, selection of the appropriate hydraulic retention time was critical for the optimal SBR operation. Following the livestock farm application, with external carbon source injecting, the total nitrogen concentration in the effluent was 85.1 mg/L. This result revealed that the standard could be accomplished through a single treatment on individual livestock farms. The ratio of nitrite nitrogen to ammonia nitrogen in the effluent was verified to be suitable for implementing the anammox process with a 10 days of hydraulic retention time. This study demonstrated the potential applicability of process in the future. However, in order to apply to livestock farms, managing variations in wastewater load across individual farms and addressing reduced nitrogen oxidation efficiency during the winter season are crucial.

• 상하수도학회지
• /
• 제21권4호
• /
• pp.429-437
• /
• 2007

This study aims to develop a sulfur-using denitrification process which is possible a renovation to advanced treatment plant submerging a simple module in activated sludge aeration tank. At first, the impact factor of sulfur-using denitrification was appreciated by the batch test. Secondly, reflecting a dissolved oxygen effect of sulfur-using denitrification that was confirmed by the batch test, in a continuous nitrification/sulfur-using denitrification, high-rate nitrogen removal reaction was induced at optimum condition controlling DO concentration according to phases. Also, inside and outside of sulfur-using denitrification module was covered with microfilter and the module was considered as an alternative of clarifier. Result of batch test for sulfur-using denitrification, $NO_2{^-}N$ was lower for consumption of alkalinity and sulfur than that of $NO_3{^-}-N$. These results revealed the accordance of theoretical prediction. In continuous nitrification/sulfur-using denitrification experiment, actual wastewater was used as a influent, and influent nitrogen loading rates were increased 0.04, 0.07, 0.11, $0.14kg\;N/m^3-day$ by changing hydraulic retention times. At this time, nitrogen loading rates of packed sulfur were increased 0.23, 0.46, 0.69, $0.93kg\;N/m^3-day$. As a result, nitrification efficiency was about 100% and denitrification efficiency was 93, 81, 79, 72%. Accordingly, nitrogen removal was a high-rate. Also the module of sulfur-using denitrification covered with microfilter did not make a fouling phenomena according to increased flux. And the module was achieved effluent suspended solids of below 10 mg/L without a clarifier. In conclusion, it is possible a renovation to advanced treatment plant submerging a simple module packed sulfur in activated sludge aeration tank of traditional facilities. And the plant used the module packed sulfur is expected as a effective facilities of high-rate and the smallest.

• 한국습지학회지
• /
• 제17권4호
• /
• pp.421-427
• /
• 2015

ASM 모델에서는 유기물을 특성에 따라 분류하는데, 일반적인 COD와 BOD로의 분류로는 ASM에서 요구하는 조건을 충족시키지 못한다. 본 연구에서는 하수종말처리장 수처리 및 슬러지 처리 계통 하수를 대상으로 미생물 호흡률을 기반으로 하여 ASM에서 요구하는 유기물 분류에 대한 실시하였다. 분석 결과 유기물 성상 분석 결과 각 하수마다 유기물 구성에서 차이를 보이는 것으로 나타났다. 이는 각 공정의 하수를 처리할 때 반드시 파악해야 하는 중요한 하수특성이라고 할 수 있다. 따라서 본 연구를 통해 규명한 각 하수별 유기물 성상은 하수종말처리장의 원활한 운영을 위해 중요한 기초 자료로 활용될 수 있을 것으로 판단된다. 질산화 반응조 내 반응시간에 따른 유기물 및 암모니아성 질소 변화 분석을 통해 SS이 질산화에 영향을 미치는 주요 인자임을 확인 할 수 있었다. 이는 질산화 반응이 유도 가능한 체류시간 선정에 밀접한 관계가 있는 것으로 사료된다.

• 한국환경과학회지
• /
• 제13권3호
• /
• pp.245-250
• /
• 2004

The SBR(Sequencing Batch Reactor) process is ideally suited to treat high loading wastewater due to its high dilution rate. SBR operates by a cycle of periods consisting of filling, reacting, settling, decanting and idling. The react phases such as aeration or non-aeration, organic oxidation, nitrification, denitrification and other bio-logical reactions can be achieved in a reactor. Although the whole reactions can be achieved in a SBR with time distributing, it is hard to manage the SBR as a normal condition without recognizing a present state. The present state can be observed with nutrient sensors such as ${NH_{4}}^{+}-N$, ${NO_{2}}^{-}-N$, ${NO_{3}}^{-}-N} and ${PO_{4}}^{ 3-}-P.$ However, there is still a disadvantage to use the nutrient sensors because of their high expense and inconvenience to manage. Therefore, it is very useful to use common on-line sensors such as DO, ORP and pH, which are less expensive and more convient. Moreover, the present states and unexpected changes of SBR might be predicted by using of them. This study was conducted to get basic materials for making an inference of SBR process from ORP(oxidation reduction potential) of synthetic wastewater. The profiles of ORP, DO, and pH were under normal nitrification and denitrification were obtained to compare abnormal condition. And also, nitrite and nitrate accumulation were investigated during reaction of SBR. The bending point on ORP profile was not entirely in the low COD/NOx ratio condition. In this case, NOx was not entirely removed, and minimum ORP value was presented over -300mV. Under suitable COD/NOx ratio which complete denitrification was achieved, ORP bending point was observed and minimum ORP value was under -300m V. Under high COD/NOx ratio, ORP bending point was not detected at the first subcycle because of the fast denitrification and minimum ORP value was under -300mV at the time.

• 유기물자원화
• /
• 제21권3호
• /
• pp.82-92
• /
• 2013

생물학적 질소 및 인을 제거하기 위한 경제적인 공법인 간헐 폭기 MBR공법은 내부순환이 없고, 간헐반응조 폭기 시간 조절을 통해서 반응시간을 조절할 수 있는 장점이 있다. 본 연구에서는 신기술로 인증 받은 폭기에너지 절약 공법인 신 간헐폭기-MBR공법, 그리고 간헐반응조 폭기/비포기 주기가 1시간/1시간 및 4시간/4시간인 일반적인 간헐 폭기 MBR공법에 있어서의 처리성을 컴퓨터시뮬레이션을 통해서 평가하였다. 폭기 주기가 1시간/1시간인 간헐폭기 MBR공법의 경우, 폭기 시 최대 용존산소 농도가 0.23mg/L가 되어, 동시 질산화/탈질 반응이 수행되는 것으로 나타나 질소와 인 제거 효율은 각각 57.0%, 55.0%로 가장 높았다. 본 연구는 유입수질이 일정한 경우에 있어서의 시뮬레이션을 수행하였으며, 각 시스템에 있어서의 실 처리장 적용성을 파악하기 위해서는 유입수질 변동에 따른 처리성을 평가할 필요가 있는 것으로 나타났다.

• 대한환경공학회지
• /
• 제22권10호
• /
• pp.1789-1797
• /
• 2000

질산화에 요구되는 산소량과 탈질소화에 요구되는 탄소원의 양을 감소시킬 수 있는 암모니아성 질소의 아질산성 질소로의 부분적 질산화 반응을 유도하기 위해 생물막 반응기를 이용하여 고농도 암모니아성 질소를 함유하고 있는 혐기성 소화슬러지 탈수여액을 대상으로 알칼리도/암모니아성 질소의 농도비, pH, FA(free ammonia), 온도변화에 따른 아질산성 질소의 축적현상에 대한 연구를 수행하였다. 실험결과 유입수의 알칼리도/암모니아성 질소의 농도비를 증가시킴에 따라 유출수의 아질산성 질소의 축적도 증가하였으며, 이는 알칼리도의 농도가 증가함에 따라 반응기내의 pH가 높게 유지됨으로서 FA의 농도가 증가하게 되어 Nitrobacter의 성장을 선택적으로 저해시키기 때문인 것으로 판단된다. 일정한 알칼리도/암모니아성 질소의 농도비 조건에서 온도가 증가할수록 아질산성 질소의 축적도 증가하였다.

• 한국물환경학회지
• /
• 제22권2호
• /
• pp.222-229
• /
• 2006

The treatment performance and operational parameters of a tertiary wastewater treatment process a biological filtration system were investigated. The biological filtration system consisted of a nitrification filter (Fiter 1) and a polishing filter with anoxic and aerobic parts (Filter 2). SS, T-C-BOD, and T-N in effluent were kept stable at less than 3, 5 mg/L, and 5 mgN/L, respectively, under a HRT in Filter (filter-bed) of 0.37~2.3 h. T-N at the outlet of Filter 2 were about 1~5 mgN/L under the condition of LV of 50~202 m/d. In Filter 2, denitrification was accomplished under LV of 50~168 m/d in a 1 m filter-bed. However, the denitrification capacity reached the maximum when the linear velocity was increased to 202 m/d. Relationship between increase in microorganism and headloss was clearer in Filter 2. As a result, the denitrification rate increased from 1.0~2.3 kgN/($m^3-filter-bed{\cdot}d$) as the headloss increased. The COD removal rate was 6.0~9.6 kgCOD/($m^3-filter-bed{\cdot}d$) when operated with Filters 1 and 2. These results mean that captured bacteria contributed a part of COD consumption and denitrification. The maximum nitrification and denitrification rate was 0.5 and 4 kgN/($m^3-filter-bed{\cdot}d$) in Filter 1 and 2.The ratio of backwashing water to the treated water was about 5~10 %. In Filter 1, wasted sludge in backwashing was only 0.7~5.3 gSS/($m^3$-treated water). In Filter 2, added methanol was converted into sludge and its value was 8.0~24 gSS/($m^3$-treated water). These results proved that this process is both convenient to install as tertiary treatment and cost effective to build and operate.

• KSBB Journal
• /
• 제24권3호
• /
• pp.291-295
• /
• 2009

본 연구는 오 폐수 내에 존재하는 총질소 성분의 생물학적 처리공정의 실증께 관한 연구를 수행한 것으로써 M면의 마을하수처리장에 YPNR 고도처리 공법을 적용하여 25일의 처리기간 동안 마을하수 중의 총질소 성분의 제거에 관한 자료를 확보하여 얻은 결론은 다음과 같다. 마을하수처리현장에 적용한 결과, 첨가탄소원 없이도 현재 배출허용기준에 적합한 70% 정도의 질소처리 효율을 나타내었다. 특히 유입 총질소 성분 중 95%는 질산화공정을 통해 질산성 질소로 전환되어 탈질공정에서 제거되고 방류되는 총질소 성분 중 질산성 질소 성분이 약 77%로서 이는 향후 강화되는 총질소 규제시 외부탄소원을 소량 투여해 줌으로써 현재의 방류수질보다 약 70% 낮은 방류수질을 유지 할 수 있을 것으로 생각된다. 결론적으로 본 실험에서 사용된 YPNR 고도처리 공정은 하수, 마을하수처리에 적용될 수 있다고 판단된다.