• 접착 및 계면
• /
• 제18권2호
• /
• pp.75-81
• /
• 2017

본 연구에서는 잘 배열된 나노세공 구조와 자성체 나노입자를 포함하는 메조포러스 카본(Carbonized Ni-FDU-15)을 합성하였다. Carbonized Ni-FDU-15는 구조형성 주형으로 트리블럭 공중합체(F127)를 이용하고, 카본 세공벽 형성 물질로 resol 전구체를 사용하며 질산 니켈(nickel(II) nitrate)을 금속이온 원으로 사용하여 증발유도 자기조립(Evaporation-Induced Self-Assembly, EISA)과 직접 탄화과정을 거쳐서 합성되었다. 메조포러스 카본은 잘 배열된 이차원적 육방체 구조(2D-hexagonal structure)를 가진다. 한편, 세공벽 내 자성체 나노입자는 니켈(Ni) 금속과 니켈 산화물(NiO)이 생성되었다. 나노입자의 크기는 약 37 nm이었다. 그리고 Carbonized Ni-FDU-15의 표면적, 세공크기, 세공부피는 각각 $558m^2g^{-1}$, $22.5{\AA}$ 그리고 $0.5cm^3g^{-1}$이었다. Carbonized Ni-FDU-15는 외부에서 자력을 가하였을 때 자력이 가해지는 방향으로 이동함을 확인하였다. 이러한 자성체 담지 메조포러스 카본 물질은 흡착/분리, 자기 저장 매체, 자성 유체(ferrofluid), 자기 공명 영상(MRI) 및 약물 타겟팅 등의 광범위한 응용 분야에 높은 응용성을 가질 것으로 기대된다.

• KSBB Journal
• /
• 제8권3호
• /
• pp.193-199
• /
• 1993

공기부양 생물반응기에서 천연 청색 색소원인 쪽 (Poly,앵wm tinctorium) 세포를 대량 배양하기 위한 배양조건을 찾기 위해 영양성분 빛 색소 전 구체를 포함한 배지 성분의 생육에 미치는 영향 과 여러 배양조건에서 세포의 생육 특성에 대하 여 설험하였다. 최적 생육조건과 생육 특성을 규 명하기 위 해 external 1oop와 internal loop 두 가지의 arr-lift bioreactor 종류를 사용하여 14일간 배양하였다. 초기 접종량을 달리한 결과 각 reactor에서 공히 접종량이 0.5-2.5% packed cell volume 보다 많을수록 생육에 좋은 결과를 나타내였다. 초기 당농도의 영향을 살펴보기 위하여 2-4%로 그 조건을 달리하여 14일간 배양한 결과 4% 초기 당농도가 생육에 가장 좋은 조건임을 알 수 있었다. Sucrose는 대수기 초기단계에서 모두 소비되었다. Tryptophan(lmM)을 첨가한 경우 14일 배양 후에 internal loop reactor에서 3.8g/l, external loop reactorr에서 3.5g/l 의 cell mass를 얻었다. Indole을 첨가했을 때에는 세포 생육 저해효과 를 나타내였는데 external과 internal Ioop reactor에서 각각 2.5g/l와 2.2g/l를 얻었다. 무기질소원 으로는 potassium nitrate가 선발되었고, contrl이에 비해 110%d의 생육도 증가가 있였다. 최적 조건 하에셔의 14일간 internal loop bioreactor 배양에서 세포 건조 중량 16.34 g/l를 얻었다.

• 한국식품영양과학회지
• /
• 제46권2호
• /
• pp.244-250
• /
• 2017

Dimethylamine(DMA), 질산염, 아질산염, biogenic amines은 발암성 니트로사민의 전구물질이다. 본 연구는 국내 상품 김치로 유통되고 있는 국내산 배추김치, 깍두기, 총각김치, 맛김치, 묵은김치, 백김치의 김치 내 DMA, 질산염, 아질산염, biogenic amines의 오염도를 조사하였다. 배추김치 내 DMA, 질산염, 아질산염 함량은 각각 29.7, 2,178.8, 3.0 mg/kg이었다. 김치 종류 중에서 깍두기의 DMA와 질산염 함량이 가장 낮았다. Tryptamine, putrescine, cadaverine, tyramine, spermidine이 백김치와 총각김치를 제외한 분석된 김치 내 검출되었다. 백김치 내 tryptamine이 단지흔적량 존재하고 spermidine은 총각김치에서는 검출되지 않았다. 배추김치 내 tryptamine, putrescine, cadaverine, tyramine, spermidine의 함량은 각각 15.0, 64.6, 18.0, 44.0, 7.8 mg/kg이었다. 깍두기 내 tyramine의 함량이 낮았다. 깍두기 내 NDMA의 오염도를 분석하였고, 그 평균 함량은 $1.38{\mu}g/kg$이었다. 깍두기 1일 평균 섭취량과 체중을 근거로 깍두기 섭취군의 NDMA 인체노출량을 산출한 결과 깍두기 섭취로 인한 NDMA 노출량은 $2.31{\times}10^{-7}mg/kg\;b.w./d$로 나타났으며, 노출안전역(MOE)은 259,924로 위해 정도가 매우 낮은 안전한 수준으로 나타났다.

• 한국재료학회지
• /
• 제12권10호
• /
• pp.784-790
• /
• 2002

For mass product of nanocrystalline ZnO ultrafine powders, self-sustaining combustion process(SCP) and ultrasonic spray combustion method(USCM) were applied at the same time. Ultrasonic spray gun was attached on top of the vertical type furnace. The droplet was sprayed into reaction zone of the furnace to form SCP which produces spherical shape with soft agglomerate crystalline ZnO particles. To characterize formed particles, fuel and oxidizing agent for SCP were used glycine and zinc nitrate or zinc hydroxide. Respectively, with changing combustion temperature and mixture ratio of oxidizing agent and fuel, the best ultrasonic spray conditions were obtained. To observe ultrasonic spray effect, two types of powder synthesis processes were compared. One was directly sprayed into furnace from the precursor solution (Type A), the other directly was heated on the hot plate without using spray gun (Type B). Powder obtained by type A was porous sponge shape with heavy agglomeration, but powder obtained using type B was finer primary particle size, spherical shape with weak agglomeration and bigger value of specific surface area. 9/ This can be due to much lower reaction temperature of type B at ignition time than type A. Synthesized nanocrystalline ZnO powders at the best ultrasonic spray conditions have primary particle size in range 20~30nm and specific surface area is about 20m$^2$/g.

• 한국재료학회지
• /
• 제22권4호
• /
• pp.207-210
• /
• 2012

The preparation of $Sm_2O_3$ doped $CeO_2$ in Igepal CO-520/cyclohexane reverse micelle solutions has been studied. In the present work, we synthesized nanosized $Sm_2O_3$ doped $CeO_2$ powders by reverse micelle process using aqueous ammonia as the precipitant; hydroxide precursor was obtained from nitrate solutions dispersed in the nanosized aqueous domains of a micro emulsion consisting of cyclohexane as the oil phase, and poly (xoyethylene) nonylphenylether (Igepal CO-520) as the non-ionic surfactant. The synthesized and calcined powders were characterized by Thermogravimetry-differential thermal analysis (TGA-DTA), X-ray diffraction analysis (XRD), and Transmission electron microscopy (TEM). The crystallite size was found to increase with increase in water to surfactant (R) molar ratio. Average particle size and distribution of the synthesized $Sm_2O_3$ doped $CeO_2$ were below 10 nm and narrow, respectively. TG-DTA analysis shows that phase of $Sm_2O_3$ doped $CeO_2$ nanoparticles changed from monoclinic to tetragonal at approximately $560^{\circ}C$. The phase of the synthesized $Sm_2O_3$ doped $CeO_2$ with heating to $600^{\circ}C$ for 30 min was tetragonal $CeO_2$. This study revealed that the particle formation process in reverse micelles is based on a two step model. The rapid first step is the complete reduction of the metal to the zero valence state. The second step is growth, via reagent exchanges between micelles through the inter-micellar exchange.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권1호
• /
• pp.95-105
• /
• 2020

In this study, iron nanoparticles impregnated hydrochar (FeNPs@HC) was synthesized using lignocellulosic waste and simple one-pot synthetic method. During hydrothermal carbonization (HTC) process, the mixture of lignocellulosic waste and ferric nitrate (0.1~0.5 M) as a precursor of iron nanoparticles was added and heated to 220℃ for 3 h in a teflon sealed autoclave, followed by calcination at 600℃ in N₂ atmosphere for 1 h. For the characterization of the as-prepared materials, X-ray diffraction (XRD), cation exchange capacity (CEC), fourier transform infrared spectrometer (FT-IR), Brunauer-Emmett-Teller (BET), transmission electron microscope (TEM), Energy Dispersive X-ray Spectroscopy (EDS) were used. The change of Fe(III) concentration in the feedstock influenced characteristics of produced FeNPs@HC and removal efficiency towards As(V) and Pb(II). According to the Langmuir isotherm test, maximum As(V) and Pb(II) adsorption capacity of Fe_0.25NPs@HC were found to be 11.81 and 116.28 mg/g respectively. The results of this study suggest that FeNPs@HC can be potentially used as an adsorbent or soil amendment for remediation of groundwater or soil contaminated with arsenic and cation heavy metals.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2288-2292
• /
• 2007

The catalytic activities of nickel-based catalysts were estimated for oxidizing acetaldehyde of VOCs exhausted from industrial facilities. The catalysts were prepared by sol-gel methods of SiO2 and SiO2-TiO2 as a xerogel followed by impregnating Al2O3 powder with the nickel nitrate precursor. The crystalline structure and catalytic properties for the catalysts were investigated by use of BET surface area, X-ray diffraction (XRD), Xray photoelectron spectroscopy (XPS) and temperature programmed reduction (TPR) techniques. These results show that nickel oxide is transformed to NiAl2O4 spinel structure at the calcination temperature of 400 °C in response to the steps with after- and co-impregnation of Al2O3 powder in sol-gel process. The NiAl2O4 could suppress the oxidation reaction of acetaldehyde by catalysts. The NiO is better dispersed on SiO2-TiO2/Al2O3 support than SiO2/Al2O3 and SiO2-TiO2-Al2O3 supports. From the testing results of catalytic activities for oxidation of acetaldehyde, Catalysts showed a big difference in conversion efficiencies with the way of the preparation of catalysts and the loading weight of nickel. The catalyst of 8 wt.% Ni/TiO2-SiO2/Al2O3 showed the best conversion efficiency on acetaldehyde oxidation with 100% conversion efficiency at 350 °C.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권10호
• /
• pp.5287-5290
• /
• 2012

Throughout human history, plant products have been used for many purposes including as medicines. Herbal products and spices can be used as preventive agents against cancer due to their antimicrobial, antioxidant and antitumorigenic properties. This study was designed to evaluate the potential protective effect of curcum in rats administered nitrosamine precursors; dibutylamine (DBA) and sodium nitrate (NaNO3); and infected with Escherichia coli (E. coli) and also to monitor changes in nuclear factor the Kappa B p65 (NF-${\kappa}B$ p56) pathway and its downstream products, Bcl-2 and interleukin-6 (IL-6), in parallel with nitrosamine precursors, E. coli and curcum treatment. Rats were divided into three groups (n=25 each; except of control group, n+20). Group I a normal control group, group II administered DBA/NaNO3 in drinking water and infected with E. coli and group III was administered DBA/NaNO3 in drinking water, infected with E. coli and receiving standard diet containing 1% curcum powder. Histopathological examination reflected that the curcum treated group featured a lower incidence of urinary bladder lesions, and lower levels of NF-${\kappa}B$, Bcl-2 and IL-6, than the group receiving nitrosamine precursor and infected with E. coli. These findings suggested that curcum may have a protective role during the process of bladder carcinogenesis by inhibiting the NF-${\kappa}B$ pathway and its downstream products.

• Carbon letters
• /
• 제11권1호
• /
• pp.38-40
• /
• 2010

Carbon supported electrocatalysts are commonly used as electrode materials for polymer electrolyte membrane fuel cells(PEMFCs). These kinds of electrocatalysts provide large surface area and sufficient electrical conductivity. The support of typical PEM fuel cell catalysts has been a traditional conductive type of carbon black. However, even though the carbon particles conduct electrons, there is still significant portion of Pt that is isolated from the external circuit and the PEM, resulting in a low Pt utilization. Herein, new types of carbon materials to effectively utilize the Pt catalyst are being evaluated. Carbon nanofiber/activated carbon fiber (CNF/ACF) composite with multifunctional surfaces were prepared through catalytic growth of CNFs on ACFs. Nickel nitrate was used as a precursor of the catalyst to synthesize carbon nanofibers(CNFs). CNFs were synthesized by pyrolysising $CH_4$ using catalysts dispersed in acetone and ACF(activated carbon fiber). The as-prepared samples were characterized with transmission electron microscopy(TEM), scanning electron microscopy(SEM). In TEM image, carbon nanofibers were synthesized on the ACF to form a three-dimensional network. Pt/CNF/ACF was employed as a catalyst for PEMFC. As the ratio of prepared catalyst to commercial catalyst was changed from 0 to 50%, the performance of the mixture of 30 wt% of Pt/CNF/ACF and 70wt% of Pt/C commercial catalyst showed better perfromance than that of 100% commercial catalyst. The unique structure of CNF can supply the significant site for the stabilization of Pt particles. CNF/ACF is expected to be promising support to improve the performance in PEMFC.

• 한국응용과학기술학회지
• /
• 제33권1호
• /
• pp.23-29
• /
• 2016

육방정계 우르자이츠형의 산화아연은 n형 반도체로써 3.37 eV의 넓은 밴드갭 에너지와 60 meV의 큰 엑시톤 바인딩 에너지를 가진 물질이다. 가스센서, 발광 다이오드, 염료 감응 태양 전지, 염료오염의 분해 등의 넓은 범위에서 활용이 가능하다. 합성 시 마이크로파 수열합성법을 사용하게 되면 높은 수율, 빠른 반응속도, 에너지 절약의 장점이 있다. 아민첨가제는 수산이온 생성 및 킬레이트 효과로 인해 산화아연 입자 형상을 조정하는 역할을 한다. 본 논문에서는 전구체로는 질산아연육수화물을 사용하였고, 형상조정제로는 에탄올아민, 에틸렌디아민, 디에틸렌트리아민, 헥사메틸렌테트라민을 사용하였다. 수산화소듐을 사용하여 용액을 pH 11로 조정하였다. 합성된 산화아연은 별모양, 막대형, 꽃모양, 원추형의 다양한 형상을 확인할 수 있었다. 아민첨가제에 의한 물리 화학적 특성과 광학적 특성을 분석하기 위해 XRD, SEM, EDS, FT-IR, UV-vis 스펙트럼, PL 스펙트럼을 사용하였다.