• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.6
• /
• pp.324-330
• /
• 2013

The main objective of this work is to experimentally investigate the effect of inlet geometries on the distribution of two-phase annular flow at header-channel junctions simulating the corresponding parts of compact heat exchangers. The cross-section of the header and the channels were fixed to $16mm{\times}16mm$ and $12mm{\times}1.8mm$, respectively. Experiments were performed for the mass flux and the mass quality ranges of $30{\sim}140kg/m^2s$ and 0.3~0.7, respectively. Air and water were used as the test fluids. Three different inlet geometries of the header were tested:no restriction (case A), a single 8 mm hole at the center (case B), and nine 2 mm holes around the center (case C) at the inlet, respectively. The tendencies of the two-phase flow distribution were different, in each case. For cases B and C (flow resistance exists), more uniform flow distribution results were seen, compared with case A(no flow resistance), due to the flow pattern change to mist flow from annular flow at the inlet, and the flow recirculation near the end plate of the header.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.957-961
• /
• 2010

Multivariate statistical approaches to classify sampling sites with measuring their similarity by water quality data. For empirical study, data of two years at the 9 sampling sites with the combination of 2 depth levels and 7 important variables related to water quality is collected in reservoir. The similarity among sampling sites is measured with Euclidean distances of water quality related variables and they are classified by hierarchical clustering method. The clustered sites are discussed with principal component variables in the view of the geographical characteristics of them and reducing the number of measuring sites. Nine sampling sites are clustered as follows; One cluster of 5, 6, and 7 sampling sites shows the characteristic of low water depth and main stream of water. The sites of 2 and 4 are clustered into the same group by characteristics of hydraulics which come from that of main stream. But their changing pattern of water quality looks like different since the site of 2 is near to dam. The sampling sites of 3, 8, and 9 are individually positioned due to the different tributary.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.1
• /
• pp.109-119
• /
• 2003

The purpose of this study was to investigate differences of the mechanical efficiency on the characteristics of the basketball wheelchairs(cambers & size of the handrims). Nine healthy and normal wheelchair basketball players who had no impairments to their upper extremities were volunteered to participate in this study. $VO_2$ was collected using automatic gas analyzer(vmax29). Gross efficiency, net efficiency and work efficiency were analyzed from the calculated external power output and energy expenditure. The results were followed. First, gross efficiency in the basketball wheelchairs was observed across the range from 4 to 10%. Gross efficiency in this study showed less values than that from the literature reviewed in the arm cranking(15%), racing wheelchair(above 30%), gait(27%) and cycling(18-23%). Second, the small size of handrim(61cm) at the 16 degrees of camber produced higher efficiency values than the large size of handrim(66cm) whereas the different sizes of handrim at the 20 degrees of camber did not show any pattern. Third, both faster speed($1.11^m/s{\rightarrow}1.39^m/s$) and increases in treadmill inclination produced increases in energy expenditure. The results of this study may provide not only better understanding of the mechanical efficiency with adequate camber degree and proper size of handrim but also fundamental information for manufacturing the wheelchair.

• Korean Journal of Veterinary Research
• /
• v.36 no.4
• /
• pp.829-837
• /
• 1996

Clostridium perfringens has been identified as a causative organism in necrotic enteritis in chicken. The bacterium has been classified into five toxigenic types (A through E) based on the pattern of the production of major lethal toxins. Seroneutralization with mice or guinea pigs usually has been used to type the organism. Of the types, types A and C of the bacterium had been recognized as the major pathogenic types in chicken. In this experiment, we isolated nine field strains of C perfringens from chicken showing necrotic enteritis in clinical symptoms and pathologic findings and identified by biochemical tests. In order to type the organism, a multiplex polymerase chain reaction (PCR) was used with primers on major lethal toxin genes instead of seroneutralization. Amplification of only a toxin gene with the PCR suggested that the disease in chicken was due to type A of C perfringens in Korea. Furthermore, the PCR method can be replaced with seroneutralization to type C perfringens in future.

• Korean Journal of Remote Sensing
• /
• v.25 no.3
• /
• pp.215-223
• /
• 2009

The noise removal as a preprocessing was tried with various kinds of wavelet pairs. Wavelet transform for 2D images generally uses the same wavelets as basis functions in horizontal and vertical directions. A method with different wavelets was tried for each direction separately, which gives more precise interpretation of the classification. Total 486 pairs of wavelets from nine basis functions were tried to remove image noises. The classification accuracies before and after the noise removal were compared. Although all kinds of wavelet pairs showed the increased accuracies in classification, there were best and worst wavelet pairs depending on the data sets. Wavelet pairs with low energy percentage of LL band showed the high classification accuracy. A pattern was found in the results that very similar vertical accuracy was distributed for each horizontal ones. Since Haar is the shortest length filter, Haar could be a predictor wavelet to find the good wavelet pairs.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.60
• /
• pp.37-46
• /
• 2000

A biomechanical model of lower extremity in seated postures was developed to assess muscular activities of lower extremity involved in a variety of foot pedal operations. The model incorporated four rigid body segments with the twenty-four muscles to represent lower extremity This study deals with quasi-static movement to investigate dynamic movement effect in seated foot operation. It is found that optimization method which has been used for modeling the articulated body segments does not predict the forces generated from biarticular muscles and antagonistic muscles reasonably. So, the revised nonlinear optimization scheme was employed to consider the synergistic effects of biarticular muscles and the antagonistic muscle effects from the stabilization of the joint. For the model validation, three male subjects performed the experiments in which EMG activities of the nine lower extremity muscles were measured. Predicted muscle forces were compared with the corresponding EMG amplitudes and it showed no statistical difference. For the selection of optimal seated posture, a physiological meaningful criterion was developed for muscular load sharing developed. For exertion levels, the transition point of type F motor unit of each muscle is inferred by analyzing the electromyogram at the seated postures. Also, for predetermined seated foot operations exertion levels, the recruitment pattern is identified in the continuous exertion, by analyzing the electromyogram changes due to the accumulated muscle fatigue.

• Safety and Health at Work
• /
• v.7 no.2
• /
• pp.120-123
• /
• 2016

Background: To assess in a laboratory setting the ability to stay awake in a sample of workers of an Italian hospital and to investigate the association between that ability and the risk of occupational injury. Methods: Nine workers at the University Hospital of Udine who reported an occupational injury in the study period (cases), and seven noninjured workers (controls) underwent a polysomnography and four 40-minute maintenance of wakefulness tests (MWT). Differences in sleep characteristics and in wakefulness maintenance were assessed using Wilcoxon's rank sums tests and Fisher's exact tests. Results: Controls had greater sleep latency, lower total sleep time, fewer leg movements, and a higher percentage ratio of cycling alternating pattern, were more likely not to fall asleep during the MWT and were less likely to have two or more sleep onsets. Although not all the differences reached statistical significance, cases had lower sleep onset times in Trials 1-3. Conclusion: In the literature, the evidence of an association between MWT results and real life risk of accidents is weak. Our results suggest a relationship between the MWT results and the risk of injury among hospital workers.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.5
• /
• pp.2674-2697
• /
• 2019

Identity authentication is a crucial line of defense for network security, and passwords are still the mainstream of identity authentication. So far trawling password attacking has been extensively studied, but the research related with personal information is always sporadic. Probabilistic context-free grammar (PCFG) and Markov chain-based models perform greatly well in trawling guessing. In this paper we propose a systematic targeted attacking model based on structure partition and string reorganization by migrating the above two models to targeted attacking, denoted as TG-SPSR. In structure partition phase, besides dividing passwords to basic structure similar to PCFG, we additionally define a trajectory-based keyboard pattern in the basic grammar and introduce index bits to accurately characterize the position of special characters. Moreover, we also construct a BiLSTM recurrent neural network classifier to characterize the behavior of password reuse and modification after defining nine kinds of modification rules. Extensive experimental results indicate that in online attacking, TG-SPSR outperforms traditional trawling attacking algorithms by average about 275%, and respectively outperforms its foremost counterparts, Personal-PCFG, TarGuess-I, by about 70% and 19%; In offline attacking, TG-SPSR outperforms traditional trawling attacking algorithms by average about 90%, outperforms Personal-PCFG and TarGuess-I by 85% and 30%, respectively.

• The Southeast Asian review
• /
• v.20 no.3
• /
• pp.147-182
• /
• 2010

The purpose of this study is to examine the population changes in the nine Southeast Asian countries, including Cambodia, Lao People's Democratic Republic, Philippine, Indonesia, Malaysia, Myanmar, Singapore, Vietnam, and Thailand. According to the demographic transition theory which described the transition from high birth and death rates to low birth and death rates, the demographic changes in less developed countries, including the Southeast Asian countries, follow the general pattern of the population changes that the Western countries had experienced. However, this theory does not consider the fact that the demographic behaviors such as fertility and mortality tend to be ethnocentric (or particular). Therefore, I examine in this paper both the generality and particularity of the population changes in the Southeast Asia . The analytic results are consistent with my assumptions. Every country in the Southeast Asia will soon reach the third phrase of the demographic transition and meet population ageing process. However, the timings arriving at the third phrase can differ. Singapore which is the most developed country had firstly passed through the demographic transition and the highest level of population ageing. Cambodia and Lao People's Democratic Republic, the least developed countries, will lastly arrive at the third phrase and the ageing society. In addition, among the three countries which had experienced war or civil war, only Cambodia had experienced babyboom.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.41 no.2
• /
• pp.56-62
• /
• 2020

Mulberry (Morus spp. family: Moraceae) has prime importance in the sericulture industry, and its foliage is the only natural feed of the silkworm Bombyx mori L. Traditional classification methods using morphological traits were largely unsuccessful in assessing the diversity and relationships among different mulberry species because of environmental influences on the traits of interest. For these reasons, it is difficult to differentiate between the varieties and cultivars of Morus spp. In the present study, inter-simple sequence repeat (ISSR) markers were used to investigate the genetic diversity of 48 mulberry samples genotyped using nine ISSR primers. The ISSR markers exhibited polymorphisms (53.2%) among mulberry genotypes. Furthermore, similarity coefficient estimated for these ISSR markers was found to vary between 0.67 and 0.99 for the combined pooled data. The phenogram drawn using the UPGMA cluster method based on combined pooled data of the ISSR markers divided the 48 mulberry genotypes into seven major groups. No genetic association was found in the collection area, and there was a mixed pattern between the mulberry lines. The hybridization between different mulberry species is highly likely to be homogenized due to natural hybridization.