• Journal of Animal Science and Technology
• /
• 제64권3호
• /
• pp.539-563
• /
• 2022

Nine pig farms were evaluated for the welfare quality in Korea using animal- and environment-based parameters (particularly air quality parameters) during the winter of 2013. The Welfare Quality^® (WQ^®) protocol consists of 12 criteria within four principles. The WQ^® protocol classifies farms into four categories ranging from 'excellent' to 'not classified'. Each of these criteria has specific measures for calculating scores. Calculations for the welfare scores were conducted online using the calculation model in the WQ^® protocol. Environment-based parameters like microclimate (i.e., temperature, relative humidity, air speed, and particulate matter), bacteria (total airborne bacteria, airborne total coliform, and airborne total Escherichia coli), concentration of gases (carbon dioxide, ammonia, and hydrogen sulfide) were measured to investigate the relationship between animal- and environment-based parameters. Correlations between the results of animal- and environment-based parameters were estimated using spearman correlation coefficient. The overall assessments found that five out of nine farms were 'acceptable', and four farms were 'enhanced'; no farm was 'not classified'. The average score for the four principles across the nine farms, in decreasing order, were 'good feeding' (63.13 points) > 'good housing' (59.26 points) > 'good health' (33.47 points) > 'appropriate behaviors' (25.48 points). In the result of the environment aspect, the relative humidity of farms 2 (93.4%), 3 (100%), and 9 (98%) was much higher than the recommended maximum relative humidity of 80%, and four out of the nine farms had ammonia concentrations greater than 40 ppm. Ammonia had negative correlations with 'positive social behaviors' and positive emotional states: content, enjoying, sociable, playful, lively, happy and it had positive correlations with negative emotional states: aimless, distressed. The concentration of carbon dioxide had negative correlations with positive emotional states; calm, sociable, playful, happy and it had a positive correlation with negative emotional state; aimless. Our results indicate that the control of the environment for growing pigs can help improve their welfare, particularly via good air quality (carbon dioxide, ammonia, hydrogen sulfide).

• 한국수산과학회지
• /
• 제42권6호
• /
• pp.600-603
• /
• 2009

Genetic and phenotypic parameter estimates for measurement traits were obtained from pacific oyster Crassostrea gigas at nine months old. For the growth-related traits among nine months old pacific oyster, heritabilities of shell length, shell height, shell width, total weight, body weight and shell weight were estimated as 0.4855, 0.5248, 0.0884, 0.7236, 0.7726 and 0.6957, respectively. Genetic correlations among the growth-related traits of pacific oyster at nines month old, shell length, shell height, shell width, total weight, body weight, shell weight were showing highly positive correlations. Breeding value on growth-related traits of pacific oyster at nine months old were estimated as shell length -7.044-11.870, shell height -11.380-18.370, shell width -1.234-2.831, total weight -8.339-17.140, body weight -1.813-3.507 and shell weight -4.422-8.837. The results show that there is quite substantial additive genetic variance for measurement traits in pacific oyster that can be exploited through selective breeding.

• Geomechanics and Engineering
• /
• 제31권6호
• /
• pp.623-635
• /
• 2022

This paper presents the re-evaluation of existing piezocone penetration test (CPTu)-based shear wave velocity (V_s) equations through their application into well-documented data obtained at nine sites in six countries. The re-evaluation indicates that the existing equations are appropriate to use for any specific soil, but not for various types of clays. Existing equations were adjusted to suit all nine clays and show that the correlations between the measured and predicted V_s values tend to improve with an increasing number of parameters in the equations. An adjusted equation, which comprises a CPTu parameter and two soil properties (i.e., effective overburden stress and void ratio) with the best correlation, can be converted into a CPTu-based equation that has two CPTu parameters and depth by considering the effect of soil cementation. Then, the developed equation was verified by application to each of the nine soils and nine other worldwide clays, in which the predicted V_s values are comparable with the measured and the stochastically simulated values. Accordingly, the newly developed CPTu-based equation, which is a time-saving and economical method and can estimate V_s indirectly for any type of naturally deposited clay, is recommended for practical applications.

• Earthquakes and Structures
• /
• 제23권3호
• /
• pp.259-269
• /
• 2022

In this study, we introduce a canonical correlation analysis method to accurately assess the tunnel damage potential of ground motion. The proposed method can retain information relating to the initial variables. A total of 100 ground motion records are used as seismic inputs to analyze the dynamic response of three different profiles of tunnels under deep and shallow burial conditions. Nine commonly used ground motion parameters were selected to form the canonical variables of ground motion parameters (GMP_CCA). Five structural dynamic response parameters were selected to form canonical variables of structural dynamic response parameters (DRP_CCA). Canonical correlation analysis is used to maximize the correlation coefficients between GMP_CCA and DRP_CCA to obtain multivariate ground motion parameters that can be used to comprehensively assess the tunnel damage potential. The results indicate that the multivariate ground motion parameters used in this study exhibit good stability, making them suitable for evaluating the tunnel damage potential induced by ground motion. Among the nine selected ground motion parameters, peck ground acceleration (PGA), peck ground velocity (PGV), root-mean-square acceleration (RMSA), and spectral acceleration (Sa) have the highest contribution rates to GMP_CCA and DRP_CCA and the highest importance in assessing the tunnel damage potential. In contrast to univariate ground motion parameters, multivariate ground motion parameters exhibit a higher correlation with tunnel dynamic response parameters and enable accurate assessment of tunnel damage potential.

• Ocean and Polar Research
• /
• 제24권3호
• /
• pp.197-205
• /
• 2002

Total magnetic field and high-resolution bathymetric data were collected over nine seamounts to the northwest of the Marshall Islands in the western Pacific. Magnetic parameters including inclination and declination were calculated from the magnetic anomalies using inversion algorithm of Plouff (1976), and a corresponding paleomagnetic pole was determined with the magnetic parameters. The paleomagnetic poles determined in this study were compared with the previous apparent polar wander path (APWP) of Pacific plate. Most seamounts of the study area have normal polarity. The study reveals that all nine seamounts in the study area formed in the southern hemisphere during the Cretaceous based on their comparison with the APWP of Pacific plate. The ages estimated from paleomagnetic poles can be divided by age into three groups: the oldest (OSM1 and OSM3), middle age (OSM2, OSM4, and 6-2), and the youngest (OSM5-1, 5-2, 5-3, and 6-1). The fermer two groups and the latter seem to be coincident with two distinct pulses of Cretaceous volcanic activity (115-90 Ma and 83-65 Ma). As a whole the seamounts at southwest of the study area are older than at those northeast.

• International Journal of Fluid Machinery and Systems
• /
• 제9권4호
• /
• pp.338-353
• /
• 2016

Information on the surge behaviors and stall stagnation boundaries for a nine-stage axial flow compressor are summarized on the basis of analytical data in comparison with those for a single-stage one, with attention to the pressure ratio effect. The general trends of the surge loop behaviors of the pressure-mass flow are similar for both compressors including the fact that the subharmonic surges tend to appear very near the stall stagnation boundaries. With respect to the nine-stage compressor, however, the mild loops in the subharmonic surges tend to be very small in size relative to the deep loops, and at the same time, insufficient surge recovery phenomenon, which is a kind of subharmonic surge, appears also far from the stagnation boundary for relatively short delivery flow-paths. The latter is found to be a rear-stage surge caused by unstalling and re-stalling of the rear stages with the front-stages kept in stall in the stalled condition of the whole compressor, which situation is caused by stage-wise mismatching in the bottom pressure levels of the in-stall multi-stage compressor. The fundamental information on the stall stagnation boundaries is given by a group of normalized geometrical parameters including relative delivery flow-path length, relative suction flow-path length, and sectional area-pressure ratio, and by another group of normalized frequency parameters including relative surge frequencies, modified reduced resonance frequencies, and modified reduced surge frequencies. Respective groups of the normalized parameters show very similar tendency of behaviors for the nine-stage compressor and the single-stage compressor. The modified reduced resonance frequency could be the more reasonable parameter suggesting the flow-induced oscillation nature of the surge phenomena. It could give the stall stagnation boundary in a more unified manner than the Greitzer's B parameter.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1187-1193
• /
• 2002

Anodic bonding process has been quantitatively evaluated based on the Taguchi analysis of the interfacial fracture toughness, measured at the interface of anodically bonded silicon-glass bimorphs. A new test specimen with a pre-inserted blade has been devised for interfacial fracture toughness measurement. A set of 81 different anodic bonding conditions has been generated based on the three different conditions for four different process parameters of bonding load, bonding temperature, anodic voltage and voltage supply time. Taguchi method has been used to reduce the number of experiments required for the bonding strength evaluation, thus obtaining nine independent cases out of the 81 possible combinations. The interfacial fracture toughness has been measured for the nine cases in the range of 0.03∼6.12 J/㎡. Among the four process parameters, the bonding temperature causes the most dominant influence to the bonding strength with the influence factor of 67.7%. The influence factors of other process parameters, such as anodic voltage and voltage supply time, bonding load, are evaluated as 18%, 12% and 2.3%, respectively. The maximum bonding strength of 7.23 J/㎡ has been achieved at the bonding temperature of 460$\^{C}$ with the bonding load of 45gf/㎠, the applied voltage of 600v and the voltage supply time of 25minites.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.709-712
• /
• 1999

This paper was aimed to investigate the shear strengthening effect of the pre-loaded reinforced concrete beams strengthened by carbon fiber sheet (CFS). Main tet parameters was the magnitude of pre-loading at the time of the retrofit and the strengthening method of carbon fiber sheet. A series of nine specimens was tested to evaluate the corresponding effect of each parameters such as maximum load capacity, load-deflection relationship, and failure mode. The results of this study showed that the failure mode is bonding failure between the concrete and the CFS before the tensile failure strain of the CFS is reached.

• 대한화학회지
• /
• 제8권1호
• /
• pp.15-19
• /
• 1964

Basicities of nine dimethylanilines have been determined in 50, 70, and 90 volume % ethanol, at $25^{\circ},\;30^{\circ},\;35^{\circ},\;and\;40^{\circ}C$. Temperature coefficients were found to be independent of solvent composition, while they showed a linear correlation with basicities of the compounds. Thermodynamic parameters obtained have been used in the discussion of substituent and solvent effects in conjunction with the general equation derived in the preceding papers.

• 한국작물학회지
• /
• 제42권5호
• /
• pp.604-608
• /
• 1997

수원 작물시험장 등 전국 각도 9개 지역에서 1990 및 1991년에 걸쳐 수행된 콩 지방적응연락시험에서, 팔달콩 등 10개의 공시계통들의 평균 수량을 조사하였으며, 수량안정성을 여러가지 방법으로 분석하여 상호 비교하였다. 수량 안정성분석은 Francis와 Kannenberg의 coefficient of variability, Finlay와 Wilkinson의 regression coefficient, Eberhart와 Russell의 deviation parameter, Plaisted의 variance component, Wricke의 ecovalence등 5개 분석방법을 이용하였으며 그 결과를 요약하면 다음과 같다. 1. 분산성분 비교에 의하면, 수량에 대한 콩유전자와 지역간 상호작용 분산성분이 콩유전자 및 년차간 상호작용 분산성분보다 약 7배 높아서, 정확한 수량안정도 평가를 위해서는 여러 해 걸쳐서 콩계통을 평가하기보다는 더 많은 지역에서 평가되어야 할 것으로 보였다. 2. 2년차 9개지역에서 수원 14005('92년 태광콩으로 장려품종 지정)가 평균수량이 높았으며, 5개 안정성 분석결과 수량안정도도 높았다. 3. 안정도계수 종류들 간의 rank correlation 분석결과, Eberhart와 Russell, Plaisted, 그리고 Wricke의 방법들 간의 고도의 유의적인 상관관계가 있었으나, Francis와 Finlay 방법은 다른 분석방법들과는 상관관계가 인정되지 않았다.