• Journal of Communications and Networks
• /
• 제6권3호
• /
• pp.245-257
• /
• 2004

Driven by the growing number of the mobile subscribers, efficient channel resource management plays a key role for provisioning multimedia service in the next generation personal communication systems. To reuse limited channel resources, diminishing the coverage areas of cells seems to be the ultimate solution. Thus, however, causes more handover events. To provide seamless connection environment for mobile terminals and applications, this article presents a novel handover scheme called the intelligent channel reservation (ICR) scheme, which exploits the location prediction technologies to accurately reserve channel resources for handover connections. Considering the fact that each mobile terminal has its individual mobility characteristic, the ICR scheme utilizes a channel reserving notification procedure (CRNP) to collect adequate parameters for predicting the future location of individual mobile terminals. These parameters will be utilized by the handover prediction function to estimate the expected handover blocking rate and the expected number of idle channels. Based on the handover prediction estimations, a cost function for calculating the damages from blocking the handover connections and idling channel resources, and a corresponding algorithm for minimizing the cost function are proposed. In addition, a guard channel decision maker (GCDM) determines the appropriate number of guard channels. The experimental results show that the ICR scheme does reduce the handover-blocking rate while keeping the number of idle channels small.

• 한국컴퓨터정보학회논문지
• /
• 제27권7호
• /
• pp.57-64
• /
• 2022

본 논문에서는 최근 대두되고 있는 디지털 헬스케어의 정의와 개요, 핵심기술, 그리고 디지털 헬스케어 기기 및 데이터를 사이버공격으로부터 보호할 수 있는 디지털 헬스케어 차세대 정보보안모델 수립 방안을 제안하고자 한다. 디지털 헬스케어기기와 데이터를 대상으로 다양한 취약점이 존재하고 있으며, 그 취약점에 대하여 사이버공격이 가능하다. 디지털 헬스케어 기기 및 정보통신망에 대한 공격을 통하여 직접적으로 사람의 생명 및 건강에 악영향을 끼칠 수 있으며, 디지털 헬스케어 데이터는 의료, 민감정보와 개인정보를 포함하고 있으므로, 필수적으로 사이버공격으로부터 안전하게 보호를 해야 한다. 본 제안의 경우 디지털헬스기기에 대한 장비 및 통신망에 대한 사이버공격과 데이터에 대한 지속적인 안전한 관리를 위해서는 차세대 정보보호체계 수립을 통하여 보다 효과적이며, 지속적으로 대응할 수 있을 것으로 전망된다.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제2권12호
• /
• pp.511-516
• /
• 2013

20여년 이전의 사회적 여건과 행정환경을 전제로 만들어진 현행 신분증은 매년 위 변조 사례가 증가하고 있다. 이에 따라, 신분증 위 변조로 인한 불법대출 등 각종 범죄행위가 증가하고, 공공기관의 업무지장이 초래되는 등 많은 선의의 피해가 발생하고 있다. 또한, 정보화 사회가 진전되면서 프라이버시 보호가 매우 중요해지고 있다. 하지만 주민등록증은 이름, 주민등록번호, 사진, 주소, 지문 등 사용자의 개인정보가 그대로 노출되어 개인정보 도용사고가 지속적으로 증가하고 있다. 이에 따라, 본 논문에서는 주민등록증의 위 변조 및 프라이버시 보호의 문제점을 살펴보고 이를 보완할 수 있는 차세대 본인확인수단을 제안한다. 이는 국가신분증의 가장 중요한 기능인 사용자 본인확인에 충실하기 위해 위 변조 방지 및 프라이버시 보호를 최우선 목표로 하였다.

• 한국통신학회논문지
• /
• 제21권5호
• /
• pp.1283-1293
• /
• 1996

This paper descries design concepts, structure and charracteristics of personal communications system based on wideband CDMA under developing for general low-tier mobile telecommunications services as the first step of the next generation mobile telecommunications systems that provide timely exchange of various types of information with anyone, from anywhere, at anytime. Also, wedesign a reverse linktransmitter/receiver structure for personal communications system based on wideband CDMA and validata the performance of the designed structure and establish the each parameter via computer simulation. Simulaation results on the effects of reverse link synchronous transmission and the effects of power control and control and channel coding in pedestrian environment for low-tier services are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1121-1125
• /
• 2004

The RT(Robot Technology) has been developed as the next generation of a future technology. According to the 2002 technical report from Mitsubishi R&D center, IT(Information Technology) and RT(Robotic Technology) fusion system will grow five times larger than the current IT market at the year 2015. Moreover, a recent IEEE report predicts that most people will have a robot in the next ten years. RCP(Robotic Cellular Phone), CP(Cellular Phone) having personal robot services, will be an intermediate hi-tech personal machine between one CP a person and one robot a person generations. RCP infra consists of $RCP^{Mobility}$, $RCP^{Interaction}$, $RCP^{Integration}$ technologies. For $RCP^{Mobility}$, human-friendly motion automation and personal service with walking and arming ability are developed. $RCP^{Interaction}$ ability is achieved by modeling an emotion-generating engine and $RCP^{Integration}$ that recognizes environmental and self conditions is developed. By joining intelligent algorithms and CP communication network with the three base modules, a RCP system is constructed. Especially, the RCP interaction system is really focused in this paper. The $RCP^{interaction}$(Robotic Cellular Phone for Interaction) is to be developed as an emotional model CP as shown in figure 1. $RCP^{interaction}$ refers to the sensitivity expression and the link technology of communication of the CP. It is interface technology between human and CP through various emotional models. The interactive emotion functions are designed through differing patterns of vibrator beat frequencies and a feeling system created by a smell injection switching control. As the music influences a person, one can feel a variety of emotion from the vibrator's beats, by converting musical chord frequencies into vibrator beat frequencies. So, this paper presents the definition, the basic theory and experiment results of the RCP interaction system. We confirm a good performance of the RCP interaction system through the experiment results.

• 한국정보통신학회논문지
• /
• 제5권4호
• /
• pp.668-675
• /
• 2001

최근, 상업적인 pcs시스템은 매우 발전되어 있으며, 결국 차세대 이동통신은 멀티미디어 서비스를 제공하는 IMT-2000에 의해 실현될 것이다. 그러므로 , 새로운 형태의 수신 시스템 연구가 활발히 진행되고 있고, 이중하나가 Direct conversion 방식이다 Direct conversion은 차세대 이동통신 시스템에 필요한 저전력, 소형, MMIC, 저가에 적합한 방식이다. 이 시스템을 사용할 경우 DC-offset의 문제가 발생하게 된다. DC-offset은 시스템에서 주파수 합성기의 누설신호에 의해 원하는 신호의 증폭을 억압한다. 본 논문에서 DC-offset을 제거하는 방법에 대해 고려한다. DC-offset의 제거법에는 AC-coupling, 대용량 capacitor, DC-feedback loop, DC-free coding의 4가지 방법이 있다. 이중에서 AC-coupling법은 가장 간단하며, DC-feedback법은 최고의 성능을 가진다. AC-coupling법과 DC-feedback법을 HP사의 ADS를 사용하여 시뮬레이션 하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권1호
• /
• pp.201-208
• /
• 2022

As around the world, ground and underground transportation capacity is reaching its limit, centering on urban areas. As urban traffic becomes congested, time and cost are astronomical, and environmental destruction caused by urban pollution is becoming increasingly serious. As a way to solve this problem, the means of flying over the air are in the spotlight as the next generation of future transportation, and the concept of urban air mobility (UAM, Urban Air Mobility) is defined as systematic planning. The development of an electric-powered vertical take-off (eVTOL) aircraft that obtains electric power through a battery using a personal aerial vehicle (PAV) as a means of transportation has accelerated. As the aircraft development of new technology aircraft in the evtol method is actively carried out, the need to prepare systems such as aircraft certification standards, pilot qualification systems, and qualification management is emerging. The Federal Aviation Administration (FAA) and the European Union Aviation Safety Agency (EASA), which lead international standards, announced new special technical conditions and temporary regulations SCVTOL-01, respectively. However, the pilot qualification system for operating the uam aircraft has not yet been clearly announced. Therefore, this paper analyzes the recently announced FAA regulations and EASA regulations to identify differences and directions in perspectives on UAMs and study the existing vertical take-off and landing aircraft (VTOL) pilot qualification system to present directions for qualification classification.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.184-184
• /
• 2008

In this paper, a power divider with a multi-band and broadband are designed and fabricated using an InGaP/GaAs process. The design of this divider is based on multi-band because it is important in the next generation IMT-Advances system. In this design, power divider is fabricated with the frequency of 824 MHz to 894 MHz, 1.8 GHz to 2.2 GHz and 2.3 GHz to 2.4 GH for cellular, personal communication system (PCS) and Wireless Broadband Internet (WiBro). The topology of the designed power divider is based on the multi-section and fabricated using integrated passive device (IPD) library of nanoENS Inc. It is measured using network analyzer.

• 디지털산업정보학회논문지
• /
• 제12권4호
• /
• pp.41-49
• /
• 2016

Smart Grid is a next generation of new power growth electrical grid which provide high quality of electrical service by using Information Technologies to increase intelligence and performance. By using Smart Grid system, it can support energy management such as increase quality of electrical power, decrease energy and decrease emissions. However, Smart Grid uses information of energy consumption and when Smart Grid collects information, it will create private information. In this thesis, it will address issues of security private information which caused by Smart Grid for administrative measure and efficiency of Smart Grid in domestic. Also, cryptographic module algorithm, latest security solutions and strong wireless security policy for network environment such as wireless communication Iinternet are require for Smart Grid perform successfully and protect national power network equipment from cyber-attack and can stop leakage of user's personal information. Finally, it is urgent to prepare protection measures of National industrial facilities and power grid which can prepare for a cyber terrorism and penetration attacks and build emergency countermeasure management team for Smart Grid are require for safe Smart Grid environment.

• Journal of information and communication convergence engineering
• /
• 제18권2호
• /
• pp.132-146
• /
• 2020

Biometric technologies have become widely available in many different fields. However, biometric technologies using existing physical features such as fingerprints, facial features, irises, and veins must consider forgery and alterations targeting them through fraudulent physical characteristics such as fake fingerprints. Thus, a trend toward next-generation biometric technologies using behavioral biometrics of a living person, such as bio-signals and walking characteristics, has emerged. Accordingly, in this study, we developed a bio-signal authentication algorithm using electrocardiogram (ECG) signals, which are the most uniquely identifiable form of bio-signal available. When using ECG signals with our system, the personal identification and authentication accuracy are approximately 90% during a state of rest. When using fingerprints alone, the equal error rate (EER) is 0.243%; however, when fusing the scores of both the ECG signal and fingerprints, the EER decreases to 0.113% on average. In addition, as a function of detecting a presentation attack on a mobile phone, a method for rejecting a transaction when a fake fingerprint is applied was successfully implemented.