• Journal of Microbiology
• /
• v.45 no.3
• /
• pp.246-255
• /
• 2007

Mutans streptococci have been implicated as cariogenic bacteria in dental caries because they can produce high levels of dental caries-causing lactic acid and extracellular polysaccharide. The aim of this study was to isolate and characterize the mutans streptococci from the dental plaque obtained from Koreans. The dental plaque samples were collected from the anterior and molar teeth of both jaws in 155 subjects (aged 2 to 33.2 years, average age $13.7{\pm}4.7\;years$). The samples were diluted by 100-fold in $1{\times}\;PBS$ and plated on mitis-salivarius bacitracin (MSB) agar plates. The mutans streptococci grown on MSB plates were screened by polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) targeting dextranase gene (dex). The mutans streptococci were identified at the species level using a 16S rDNA sequencing comparison method. The biochemical tests were carried out to biotype the mutans streptococci. Ninety-five strains of the mutans streptococci out of 358 colonies, which were derived from 141 subjects, were isolated. Of them, 77 strains and 18 strains were Streptococcus mutans and Streptococcus sobrinus, respectively. The biotyping data showed that 62, 1, 20, 10, and 2 strains were biotypes I, II, IV, V and variant, respectively. Of the two strains of variant biotype, one strains was similar to biotype IV except that it was positive to the arginine hydrolysis test. We considered this one strain a new biotype, and classified it as biotype VII. In conclusion, S. mutans and its biotype I was most frequently isolated in Korean dental plaque. The mutans streptococci strains isolated in this study might be useful for the study of the pathogenesis and the prevention of dental caries.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.4
• /
• pp.113-124
• /
• 1998

Numerical study using nonlinear finite element analysis is done for investigating behavior of isolated reinforced concrete walls subject to combined in-plane and out-of-plane bending moments and axial force. A method for estimating the ultimate strength of wall is developed, based on the analytical results. For the nonlinear finite element analysis, a computer program addressing material and geometric nonlinearities is developed. An existing unified method combining plasticity theory and damage model is used for material model of reinforced concrete. By numerical studies, the internal force distribution in the cross section is idealized, and a new method for estimating the ultimate strength of wall is developed. According to the proposed method, variation of the interaction curve of in-plane bending moment and axial force depends on the range of the permissible axial force per unit length that is determined by the given amount of out-of-plane bending moment. As the out-of-plane bending moment increases, the interaction curve shrinks, which indicates a decrease in the ultimate strength. The proposed method is compared with an existing method using the general assumption that strain shall be directly proportional to the distance from the neutral axis. Compared with the proposed method, the existing method overestimates the ultimate strength for walls subject to low out-of-plane bending moments, and it underestimates the ultimate strength for walls subject to high out-of-plane bending moments.

• KSBB Journal
• /
• v.31 no.1
• /
• pp.27-32
• /
• 2016

Several CoA transferases from Clostridium beijerinckii, C. perfringens and Klebsiella pneumoniae were examined for biosynthesis of lactate-containing polyhydroxyalkanoates (PHAs) in recombinant Escherichia coli XL1-Blue strain. The CB3819 gene and the CB4543 gene from C. beijerinckii, the pct gene from C. perfringens and the pct gene from K. pneumoniae, which encodes putative CoA transferase gene, respectively, was co-expressed with the Pseudomonas sp. MBEL 6-19 phaC1437 gene encoding engineered Pseudomonas sp. MBEL 6-19 PHA synthase 1 ($PhaC1_{Ps6-19}$) to examine its activity for the construction of key metabolic pathway to produce poly(3-hydroxybutyrate-co-lactate) [P(3HB-co-LA)]. The recombinant E. coli XL1-Blue expressing the phaC1437 gene and CB3819 gene synthesized poly(3-hydroxybutyrate) [P(3HB)] homopolymer to the P(3HB) content of 60.5 wt% when it was cultured in a chemically defined medium containing 20 g/L of glucose and 2 g/L of sodium 3-hydroxybutyrate. Expression of the phaC1437 gene and CB4543 gene in recombinant E. coli XL1-Blue also produced P(3HB) homopolymer to the P(3HB) content of 51.2 wt% in the same culture condition. Expression of the phaC1437 gene and the K. pneumoniae pct gene in recombinant E. coli XL1-Blue could not result in the production of PHAs in the same culture condition. However, the recombinant E. coli XL1-Blue expressing the phaC1437 gene and the C. perfringens gene could produce poly(3-hydroxybutyrate-co-lactate [P(86.4mol%3HB-co-13.7 mol%LA) up to the PHA content of 10.6 wt% in the same culture condition. Newly examined CoA transfereases in this study may be useful for the construction of engineered E. coli strains to produce PHA containing novel monomer such lactate.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.1
• /
• pp.33-38
• /
• 2009

The use of portable devices has created the need for new reliability criterion of drop impact tests because of the tendency to accidentally drop in the use of these devices. The effects of different PCB surface finishes (organic solderability preservative (OSP) and electroless nickel immersion gold (ENIG)) and high temperature storage (HTS) test on the drop reliability were studied. Various drop test conditions were used to evaluate a drop reliability of assemblies to endure such impact and shock load. In the case of the as-reflowed samples (no HTS test), the SAC/OSP boards exhibited a better drop impact reliability than that of SAC/ENIG. However, the reverse was true if HTS test is performed. In addition, significant decrease of drop reliability was observed for both SAC/ENIG and SAC/OSP assemblies after HTS test. It was also observed that the thickness of intermetallic compound layer do play an important role in the brittle fracture of drop test.

• Microbiology and Biotechnology Letters
• /
• v.43 no.4
• /
• pp.314-321
• /
• 2015

Agar-hydrolyzing bacteria were isolated from the coastal sea water of Jeju Island. One isolate, designated as S4, was selected for further study. The S4 cells were Gram-negative and rod-shaped with smooth beige surfaces and single polar flagellum. Cells were grown at $15-42^{\circ}C$, 0.5-5% (w/v) NaCl, between pH 6.0 and 9.0, and in media containing 0.5-5% (w/v) NaCl. The G+C content was 49.93 mol%. The major fatty acids (>15%) were $C_{18:1}{\omega}7c$, $C_{16:0}$ and Summed feature 3 (comprising $C_{16:1}{\omega}7c/iso-C_{15:0}$ 2-OH). Based on 16S rRNA sequencing and biochemical and chemotaxonomic characteristics, the strain was designated as Vibrio sp. S4. In liquid culture supplemented with 0.1% agar the cell density and agarase activity reached a maximum level in 72 h, while agarase activity in the culture without agar was negligible, implying agarose expression is induced by agar. The optimum pH and temperature for the extracellular crude agarase of S4 were 7.0 and $45^{\circ}C$, respectively. However, it also exhibited 98.6% and 87.6% at $40^{\circ}C$ and $50^{\circ}C$, respectively, of the maximum activity seen at $45^{\circ}C$. The crude agarase hydrolyzed agarose into (neo)agarotetraose and (neo)agarohexaose.

• Microbiology and Biotechnology Letters
• /
• v.42 no.2
• /
• pp.194-201
• /
• 2014

Clitocybin A is a novel anti-wrinkle cosmetic agent produced by the strain from a Korean native mushroom Clitocybe aurantiaca. In this study, fermentation, extraction, and purification conditions for a large scale production of clitocybin A were optimized, and its cytotoxicity and inhibition activity on the expression of matrix metalloproteinase-1 (MMP-1) were characterized. The mass production of anti-wrinkle agent was achieved according to the 300 L fermentation process with a fed-batch cultivation using the modified yeast-maltose (YM) broth, and a total of 12.5 kg of cell mass was obtained in a 120 L culture broth for 14 days. After extraction and purification, clitocybin A was identified by HPLC. The cytotoxicity of clitocybin A was examined by the MTT assay. When assayed at 100 and 200 ${\mu}g/ml$ concentrations, clitocybin A showed no cytotoxicity, demonstrating safety. The inhibition activity of clitocybin A on the expression of MMP-1 was examined against UV irradiation. Oleanolic acid (control group) showed a relatively low MMP-1 inhibiting activity (ca. 16.7%) at 10 ${\mu}g/ml$ and showed increased cytotoxicity at higher concentrations. In contrast, clitocybin A showed no cytotoxicity at 100 ${\mu}g/ml$, and exhibited a relatively high MMP-1-inhibiting activity (33.1%). These findings indicate that clitocybin A may be a safe and effective anti-wrinkle agent for use in functional cosmetics.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.4 s.77
• /
• pp.395-405
• /
• 2005

This paper summarizes the test results of the flexible-stiff mixed system for the effective use of high-strength steel. Steel with a high degree of strength and performance is being increasingly required as buildings get larger and taller. High-strength steels cannot be used for many applications, though, because they have a number of defects. For instance, they have a high yield ratio, a small strain in maximum stress, and equal Young's modulus compared to mild steels. A new structural system is needed to effectively use high-strength steels with some defects. This paper proposes the flexible-stiff mixed system for the effective use of high-strength steels with high yield ratios. The possibility of using the system is discussed through the test of flexible-stiff mixed columns with high-strength steels. The main variable of the specimens is the yield displacement ratio, including both the force ratio and the stiffness ratio. The proper yield displacement ratio is proposed by adopting the flexible-stiff mixed system. The test results showed that the proposed flexible-stiff mixed system has a high capacity for energy absorption and the highest capacity for energy absorption when the yield displacement ratio of the flexible element to the stiff element ranges from 2.7 to 3.3.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.186-186
• /
• 2000

After LeComber et al. reported the first amorphous hydrogenated silicon (a-Si: H) TFT, many laboratories started the development of an active matrix LCDs using a-Si:H TFTs formed on glass substrate. With increasing the display area and pixel density of TFT-LCD, however, high mobility TFTs are required for pixel driver of TF-LCD in order to shorten the charging time of the pixel electrodes. The most important of these drawbacks is a-Si's electron mobiliy, which is the speed at which electrons can move through each transistor. The problem of low carier mobility for the a-Si:H TFTs can be overcome by introducing polycrystalline silicon (poly-Si) thin film instead of a-Si:H as a semiconductor layer of TFTs. Therefore, poly-Si has gained increasing interest and has been investigated by many researchers. Recnetly, fabrication of such poly-Si TFT-LCD panels with VGA pixel size and monolithic drivers has been reported, . Especially, fabricating poly-Si TFTs at a temperature mach lower than the strain point of glass is needed in order to have high mobility TFTs on large-size glass substrate, and the monolithic drivers will reduce the cost of TFT-LCDs. The conventional methods to fabricate poly-Si films are low pressure chemical vapor deposition (LPCVD0 as well as solid phase crystallization (SPC), pulsed rapid thermal annealing(PRTA), and eximer laser annealing (ELA). However, these methods have some disadvantages such as high deposition temperature over $600^{\circ}C$, small grain size (<50nm), poor crystallinity, and high grain boundary states. Therefore the low temperature and large area processes using a cheap glass substrate are impossible because of high temperature process. In this study, therefore, we have deposited poly-Si thin films on si(100) and glass substrates at growth temperature of below 40$0^{\circ}C$ using newly developed high rate magnetron sputtering method. To improve the sputtering yield and the growth rate, a high power (10~30 W/cm2) sputtering source with unbalanced magnetron and Si ion extraction grid was designed and constructed based on the results of computer simulation. The maximum deposition rate could be reached to be 0.35$\mu$m/min due to a high ion bombardment. This is 5 times higher than that of conventional sputtering method, and the sputtering yield was also increased up to 80%. The best film was obtained on Si(100) using Si ion extraction grid under 9.0$\times$10-3Torr of working pressure and 11 W/cm2 of the target power density. The electron mobility of the poly-si film grown on Si(100) at 40$0^{\circ}C$ with ion extraction grid shows 96 cm2/V sec. During sputtering, moreover, the characteristics of si source were also analyzed with in situ Langmuir probe method and optical emission spectroscopy.

• Korean Journal of Microbiology
• /
• v.41 no.4
• /
• pp.293-299
• /
• 2005

Many isolates from soil of Korean ginseng rhizosphere did not show remarkable growth on full strength of the conventional nutrient broth (NB medium) but grew on its 100-fold dilution (DNB medium). Six hundred-forty strains were isolated as oligotrophic bacteria. In the course of screening for new bioactive compounds from oligotrophic bacteria from soil, 8 strains which had appeared to form of clear zone on a medium containing colloidal chitin as a sole carbon source were selected for further studies. Strain CR42 hydrolyzed a fluorogenic analogue of chitin, 4-methylumbelliferyl-D-glucosaminide (MUF-NAG) . Mo st of the culture supernatant of these isolates hydrolyzed 4-methylumbelliferyl-D-N,N'-diacetylchitobioside (MUF-diNAG). The isolates were heterogeneous and categorized to gamma- and beta-proteobacteria, Bacillaceae, Actinobactepia, and Bacteroides by 16S rRNA analysis. Two strains, WR164 and CR18, had a 16S rRNA sequence of $95-96\%$ identical to uncultured bacteria. It was observed that CR2 and CR75 could inhibit the growth of Colletotrichum gloeosporioides with hyphal extention-inhibition assay on PDA plate supplemented with $1\%$ colloidal chitin.

• Korean Journal of Microbiology
• /
• v.36 no.3
• /
• pp.203-208
• /
• 2000

A Baczllus circdans KCTC3004 $\alpha$-amylase gene contained in a recombinant plasmid pAL850 was transferred into a new shuttle vector plasmid pALSIlI by ligating linearlzed DNAs of pUC19 and pUB110. B. subtilis RM125 and B. megatenurn ATCC14945 transfonned with pALS111 produced the $\alpha$-amylase substantially Most of the enzyme was produced during the exponential growth period. The maxiinurn activities of the $\alpha$-amylase produced by the Bucillus transformants were compared with that of the B. circulans gene donor strain. The B. subtilis RM125(pALS111) enzyme showed the actlvicy 95 times higher than that of the gene donor cells, followed by the B, nzegaterium ATCC14945(pALSlll) enzyme with activity 34 limes higher than that of the gene donor cells. While E coli secreted about 10% of the produced enzyme, B. subtilis excreted the enzyme inlo the medium wholly and B. megaterirun about 98% ofthe total product. The plasmid pALSI11 was quite stable inB. nzegaterium (92%), inoderately stable in B. subtilis (76%), but was unstable in E. coli (38%). The SDS-PAGE and zymogram of this enzyme produced in E. coli(pALS111), B. subtilis( pALS111) or B. megateril~m (pALS111) indicated a molecular weight of 55,000. The enzymes overproduced in three different host cells hydrolyzed starch to produce mainly maltoaiose and mallooligosaccharides.