• Title/Summary/Keyword: new strain

Search Result 2,143, Processing Time 0.277 seconds

Antiviral activity of Herba Patrinea (a Chinese medicinal herb) against respiratory syncytial virus in vitro

  • Li, Hong-Yuan;Li, Shan-Shan;Liu, Dian-Li;Dong, Yan-Mei;Tian, Wen-Jing
    • Advances in Traditional Medicine
    • /
    • v.3 no.2
    • /
    • pp.106-110
    • /
    • 2003
  • Respiratory syncytial virus (RSV) has long been considered an important cause of severe lower respiratory tract infection in infants and young children throughout the world. Unfortunately, no effective treatment of RSV exists. Therefore, New agents are needed to reduce the impact of RSV. We have studied the anti-viral effect of traditional Chinese midicinal herbs for over ten years and find Herba Patrinea (a Chinese medicinal herb) has the anti-RSV effect in vitro. In this study, the Herba Patrinea was extracted with hot water, condensed and sterilized. The cytotoxicity of the aqueous extract was tested by adding the diluted extract directly to HeLa cells and its effect on anti-RSV was estimated by the CPEI assay. As a result, the median cytotoxic concentration $(CC_{50})$ of Herba Patrinea was 32 mg/ ml by morphological observation, the median effective concentration (50% effective concentration, $EC_{50}$) of the Herba Patrinea against replication of the Long strain of RSV in HeLa cells were 1.25 mg/ml. The selectivity index $(SI=CC_{50}/EC{50})$ is 25.6. Moreover, Herba Patrinea gave a dose-dependent response in inhibiting RSV. In time of addition experiment, Herba Patrinea inhibited replication of RSV in HeLa cells when it was added at 0h, 2h, and 4h after virus infection. In summary, the results of this study suggest Herba Patrinea may be a novel anti-RSV drug and it is worthy of further studying.

The Effects of Nicotine on the Mouse Oocyte Maturation In vitro (생쥐 난자의 체외 성숙에 미치는 Nicotine의 영향)

  • Sung, Ki-Cheong;Bae, In-Ha
    • Clinical and Experimental Reproductive Medicine
    • /
    • v.28 no.1
    • /
    • pp.1-12
    • /
    • 2001
  • Objective: The present study was done to clarify the effects of nicotine and nicotine tartrate on the mouse oocyte maturation in vitro. Methods: GV (germinal vesicle) oocytes were isolated from Graafian follicle of ovaries with sharp needles under a stereomicroscope from female mouse of ICR strain (4 weeks old). Collected oocytes were cultured for 17 hours at $37^{\circ}C$, 5% $CO_2$ in air and 100% humidified condition in incubator. New MHBS was the basic medium used in which nicotine, nicotine tartrate, and mecamylamine (antagonist of nicotinic acetylcholine receptor) were added depending on the experimental group. GV oocytes were cultured in one of these media. Results: Nicotine ($300{\mu}M{\sim}5mM$) had no effects on GVBD (germinal vesicle breakdown) compared to the control, but increasing concentration of nicotine led to an decrease in the first polar body formation. However, nicotine ($10{\sim}500{\mu}M$) induced GVBD in a dose-dependent manner of GV oocytes in a medium containing dbcAMP. Nicotine tartrate ($50{\mu}M{\sim}5mM$) had no effects on GVBD compared to the control but, increasing concentration of nicotine tartrate led to an decrease in the first polar body formation. Mecamylamine $10{\mu}M$ added to the medium containing nicotine ($300{\mu}M{\sim}5mM$) showed higher percentage of the first polar body formation compared to the nicotine ($300{\mu}M{\sim}5mM$) treatment group. Mecamylamine $10{\mu}M$ added to the medium containing nicotine tartrate ($50{\mu}M{\sim}5mM$) showed higher percentage of the first polar body formation compared to the nicotine tartrate ($50{\mu}M{\sim}5mM$) treatment group. Conclusion: The present study suggest that nicotine and nicotine tartrate have the harmful effects on the meiotic maturation of the mouse oocytes in vitro. However, mecamylamine block harmful effects of nicotine and nictine tartrate.

  • PDF

Development of Seismic Performance Evaluation Reinforcement by FRP and Ductile Material Layered Composites (섬유강화플라스틱과 연성재 적층복합체로 구성된 내진성능보강재의 개발)

  • Chang, Chun-Ho;Jang, Kwang-Seok;Kim, Ki-Hong;Joo, Chi-Hong
    • Proceedings of the KSR Conference
    • /
    • 2010.06a
    • /
    • pp.1486-1491
    • /
    • 2010
  • Recently, the frequency and magnitude of the earthquake have increased. The structural safety of the public facilities such as bridges and tunnels etc. which were not concerned for earthquake resistant design are increased. Fiber reinforcement polymer that has been frequently studied for seismic retrofit has advantage as seismic reinforcement material, but it has disadvantage of the brittleness. Therefore, the investigation of safety and seismic reinforcement are required. In this study, new FRP-ductile material layered composites proposed to seismic performance reinforced of subway tunnel. Tensile test of FRP-ductile material layered composites showed that Maximum tensile force of FRP-ductile using Aluminum is similar to existing FRP reinforcement material and maximum strain was increased. In case of application of domestic subway tunnel which need ductility, layered composites of FRP-Aluminum is estimated effectively for increase of seismic performance.

  • PDF

Dislocation-oxide interaction in Y2O3 embedded Fe: A molecular dynamics simulation study

  • Azeem, M. Mustafa;Wang, Qingyu;Li, Zhongyu;Zhang, Yue
    • Nuclear Engineering and Technology
    • /
    • v.52 no.2
    • /
    • pp.337-343
    • /
    • 2020
  • Oxide dispersed strengthened (ODS) steel is an important candidate for Gen-IV reactors. Oxide embedded in Fe can help to trap irradiation defects and enhances the strength of steel. It was observed in this study that the size of oxide has a profound impact on the depinning mechanism. For smaller sizes, the oxide acts as a void; thus, letting the dislocation bypass without any shear. On the other hand, oxides larger than 2 nm generate new dislocation segments around themselves. The depinning is similar to that of Orowan mechanism and the strengthening effect is likely to be greater for larger oxides. It was found that higher shear deformation rates produce more fine-tuned stress-strain curve. Both molecular dynamics (MD) simulations and BKS (Bacon-Knocks-Scattergood) model display similar characteristics whereby establishing an inverse relation between the depinning stress and the obstacle distance. It was found that (110)oxide || (111)Fe (oriented oxide) also had similar characteristics as that of (100)oxide || (111)Fe but resulted in an increased depinning stress thereby providing greater resistance to dislocation bypass. Our simulation results concluded that critical depinning stress depends significantly on the size and orientation of the oxide.

Analysis of Whole Tunnel Stability by Using Rock Mass Classification and Mohr-Coulomb Analytical Solution (암반분류와 Mohr-Coulomb 이론해를 이용한 터널 전구간 안정성 분석)

  • Jung, Yong-Bok;Park, Eui-Seob;Ryu, Dong-Woo;Cheon, Dae-Sung
    • Tunnel and Underground Space
    • /
    • v.23 no.4
    • /
    • pp.280-287
    • /
    • 2013
  • Finite element or difference methods are applied to the analysis of the tunnel stability and they provide detailed behaviour of analyzed tunnel sections but it is rather inefficient to analyze all the section of tunnel by using these methods. In this study, the authors suggest a new stability analysis method for whole tunnel to provide an efficient and easy way to understand the behaviour of whole tunnel by using an analytical solution with the assumption of equivalent circular tunnel. The mechanical behaviour, radial strain and plastic zone radius of whole tunnel were analyzed and appropriate support pressure to maintain the displacement within the allowable limit was suggested after the application of this method to the tunnel. Consequently, it was confirmed that this method can provide quick analysis of the whole tunnel stability and the quantitative information for subsequent measures such as selection of tunnel sections for detailed numerical analysis, set up of the monitoring plan, and so on.

Mouse Single Oral Dose Toxicity Studies of PGB-1, a Novel Polyglucosamine Polymer Produce from Enterobacter sp. BL-2

  • Lee, Yong-Hyun;Son, Mi-Kyung;Jung, Young-Mi;Kim, Tae-Kwon;Park, Dong-Chan;Lee, Hyeung-Sik;Kim, Pan-Soo;Ku, Sae-Kwang
    • Toxicological Research
    • /
    • v.23 no.4
    • /
    • pp.373-382
    • /
    • 2007
  • This study was conducted to obtain acute information of the oral dose toxicity of PGB-1, a novel polyglucosamine polymer produced from a new strain Enterobacter sp. BL-2 in male and female mice. In order to calculated 50% lethal dose ($LD_{50}$) and approximate lethal dose (LD), test material was once orally administered to male and female ICR mice at dose levels of 2000, 1000, 500, 250, 125 and 0 (vehicle control) ml/kg (body wt.). The mortality and changes on body weight, clinical signs, gross observation and organ weight and histopathology of principle organs were monitored 14 days after dosing with PGB-1. We could not find any mortalities, clinical signs, body weight changes and gross findings. In addition, significant changes in the organ weight and histopathology of principal organs were not observed except for some sporadic findings. The results obtained in this study suggest that PGB-1 may not be toxic in mice and may be therefore safe for clinical use. The $LD_{50}$ and approximate LD in mice after single oral dose of PGB-1 were considered over 2000 mg/kg in both female and male mice.

Numerical Analysis on Semi-Solid Forging and Casting Process of Aluminum Alloys (알루미늄합금의 반용융 단조 및 주조공정에 관한 수치해석)

  • 강충길;임미동
    • Transactions of Materials Processing
    • /
    • v.6 no.3
    • /
    • pp.239-249
    • /
    • 1997
  • The behaviour of alloys in the semi-solid state strongly depends on the imposed stress state and on the morphology of the phase which can vary from dendritic to globular. To optimal net shape forging of semi-solid materials, it is important to investigate for filling phenomena in forging process of arbitrarily shaped dies. To produce a automotive part which has good mechanical property, the filling pattern according to die velocity and solid fraction distribution has to be estimated for arbitrarily shaped dies. Therefore, the estimation of filling characteristic in the forging simulation with arbitrarily shaped dies of semi-solid materials are calculated by finite element method with proposed algorithm. The proposed theoretical model and a various boundary conditions for arbitrarily shaped dies is investigated with the coupling calculation between the liquid phase flow and the solid phase deformation. The simulation process with arbitrarily shaped dies is performed to the isothermal conditions of two dimensional problems. To analysis of forging process by using semi-solid materials, a new stress-strain relationship is described, and forging analysis is performed by viscoelastic model for the solid phase and the Darcy's law for the liquid flow. The calculated results for forging force and filling limitations will be compared to experimental data. The filling simulation of simple products performed with the uniform billet temperature(584$^{\circ}C$) from the induction heating by the commercial package MAGMAsoft. The initial step of computation is the touching of semi-solid material with the end of die gate and the initial concept of proposed system just fit with the capability of MAGMAsoft.

  • PDF

Studies on Shigella Isolated during Recent Twenty Months and Changes of Those Antibiotics Susceptibility Patterns for Last Twenty Years (최근 20개월간 분리된 이질균의 고찰과 과거 20년간의 항균제에 대한 감수성의 변천)

  • Park, Seung-Hahm
    • The Journal of the Korean Society for Microbiology
    • /
    • v.16 no.1
    • /
    • pp.1-5
    • /
    • 1981
  • Shigella is one of the most prevalent pathogens for the diarrhoeal diseases in the developing countries. One hundered and six strains of shigella were isolated from January 1980 to August 1981 at the dept. of clinical pathology, Han Yang Medical Center. Subgroups of these strains were identified as one strain of S. dysenteriae, 98 strains of S. flexneri and 7 strains of S. sonnei. None of S. boydii was observed. Sex ratio, male to female was 48 to 58. Age distribution disclosed 6 cases under one year, 11 cases one to under 2 years and 21 cases(19.8%) two to under 3 years. Subtotal of 0 to 9 years showed 64 cases(60.4%). Susceptibility for antibiotics of these strains revealed dibekacin 100%, sisomicin 100%, amikacin 98.1%, cefazolin 97.2%, tobramycin 97.1%, gentamicin 95.2%, colistin 93.0%, minocycline 89.6%, kanamycin 83.0%, carbenicillin 18.9%, streptomycin 18.9%, tmp-smz 8.6%, ampicillin 2.8% and chloramphenicol 1.9%. Patterns of resistance to sulfa, streptomycin, chloramphenical and tetracycline have already started at the early part of 1960 decade. Although ampicillin was highly sensitive to shigella at the end of 1960 to the early part of 1970 decade, this study has disclosed high resistance to the strains. New antibiotics such as amikacin, cefazolin, dibekacin, gentamicin, and tobramycin have revealed highly sensitive to these strains, however, multiresistance for those antibiotics will be shown to be prevalent in this country within several years, where it is probably related to the unrestricted sale and use of antibiotics in man.

  • PDF

New Temperate Bacteriophages of Lactococcus garvieae (Lactococcus garvieae의 새로운 용원성파아지)

  • Park, Kyun-Hyun;Muroga, Kiyokuni;Jeong, Hyun-Do
    • Journal of fish pathology
    • /
    • v.11 no.2
    • /
    • pp.137-141
    • /
    • 1998
  • Temperate phages were effectively induced from presumptive lysogenized cells of 96 strains out of 111 strains of L. garvieae No. 44 strains (phage type B) as the host cell. Similar cultures in distilled water-based TSB did not induce lytic infection in these cells. These temperate phages were also effectively induced by ultraviolet irradiation. All phages isolated were lytic only to L. garvieae No. 44 strain and the lytic nature was different from those of PLgY, PLgW, and PLgS. The virions appeared extracellularly after 1h of induction culture and increased in number until reaching the maximum of $10^6$ PFU/ml after 12h. This phage production was lower than that ($10^{10}$ PFU/ml) of the virulent phage.

  • PDF

Experimental Study on the Ultimate Strength of Composite Cylinder under Hydrostatic Pressure (수압을 받는 복합재 원통의 최종강도 실험 연구)

  • Cho, Sang-Rai;Kim, Hyun-Su;Koo, Jeong-Bon;Cho, Jong-Rae;Kwon, Jin-Hwe;Choi, Jin-Ho
    • Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
    • /
    • 2006.11a
    • /
    • pp.154-157
    • /
    • 2006
  • Composite material is one of the strong candidates for deep see pressure hulls. Research regarding composite unstiffened or stiffened cylinders subjected to hydrostatic pressure has a couple of decades history abroad but domestic research is very new. Experimental investigations seem necessary to understand their structural behavior not only up to the ultimate limit state but in post-ultimate regime. Those experimental information will be very helpful to develop any theoretical methods or to substantiate any commercial numerical packages for structural analyses. In this study, ultimate strength tests on seven composite cylinders subjected to hydrostatic pressure are reported, which includes the fabrication method of models, material properties of the material, initial shape imperfection measurements, test procedure and strain and axial shortening measurements during the tests. The ultimate strengths of the models were compared with those of numerical analyses. The numerical predictions are higher than the test results. It is necessary to improve the accuracy of the numerical predictions.

  • PDF