• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.9-18
• /
• 2001

1. EAF Dust in Japan - Generation and Characteristics. The quantity of dust generated from EAF shops in Japan was estimated to be 520,000 tons/year in 1999. Extremely fine dust (or fume) is formed in the EAF by metal vaporization. Its characteristics such as chemical compositions, phases, particle size, leaching of heavy metal are mentioned. 2. EAF Dust Treatment Methods in Japan. In 1999, 61% of EAF dust was treated by regional zinc recovery processing routes, 25% went to landfill disposal, 4% was reused as cement material, and 10% was treated by on-site processing routes. The problems of EAF dust treatment methods in Japan are: (1) very high treatment cost, and (2) heavy environmental load (leaching of heavy metal, emission of dioxins, depletion of disposal sites, etc). It has been much hoped for that new dust management technology would be developed. 3. New technology of EAF dust treatment in Japan. In Japan, some new technologies of EAF dust treatment have been developed, and some others are in the developing stages. Following five processes are mentioned:. (1) Smelting reduction process by Kawasaki Steel, (2) DSM process by Daido Steel, (3) VHR process by Aichi Steel, (4) On-site dust direct recycling technology, and (5) Process technology of direct separation and recovery of iron and zinc metals contained in high temperature EAF off gas by the Japan Research and Development Center fur Metals.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.292-298
• /
• 2010

Recently, with the beginning of the commercial operation of high-speed railway, there have been a number of changes in track structure fields. Also, it is expected that the development and introduction of new technology will be increased afterwards. However, it accompanies a lot of risk to install new track structures of which performance and safety are not verified on permanent ways with high traffic density. Therefore, to minimize the risk and enhance the adoption of new technology, it is required to develop a systemic verification system for track structure. To do this, in this paper, main contents of a draft of guidelines for track structure verification, and main issues in debate such as criteria and method for verification, test conditions and test periods are discussed. Also, a process to choose a most appropriate one for a specific project out of proven track structures by the above verification system, the selection process by the technical investigation committee and the VE process to analyze the economical and maintenance aspects based on LCC concept in Korea Rail Network Authority is introduced.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.302-302
• /
• 2009

미국 DOE(Department of energy) 산하 EERE(the office of energy efficiency and renewable energy)에서는 시행되고 있는 일반 프로그램 평가(General Program Evaluation) 중 하나인 과정 평가(Process Evaluation)는 프로그램의 수행의 효율성과 유효성을 평가하기 위해 수행된다. EERE에서는 프로그램 별로 매 2~3년에 한번, 프로그램의 진행에 장애요인을 시행하기 위해 부정기적으로 과정평가를 수행하여 프로그램의 진행과정을 개선할 것을 제안하고 있다. 과정평가의 방법론으로는 사례연구(case study), 내용분석(content analysis), 메타평가(meta evaluation), 델파이분석(delphi-analysis), 외부 동료평가(peer review) 등의 방법론이 사용될 수 있다. 특히, EERE는 "Peer Review Guide(2004)"을 발간하여 과정평가에서 있어 외부 동료평가의 방법론을 정리하였다. 과정평가를 통해 프로그램 수행결과의 중간점검과 동시에 프로그램의 발전을 위하 전문가의 제언을 수집할 수 있다. 따라서 과정평가의 결과는 프로그램의 개선에 도움을 줄 수 있으며, 장기 과제인 경우 프로그램 관리에 효과적으로 사용될 수 있다. 우리나라의 경우, 사업 수행 시 '진도보고'나 '중간결과 발표' 등을 통하여 동일한 내용의 평가를 시행하고 있으나, 평가의 항목.시기.예산 등에 대한 지침(guideline)이 구축되었다고 볼 수 없는 상황이다. 한국의 신재생에너지 보급사업은 국가적인 중요도, 투입예산의 규모 및 수행기간 등을 고려할 때 과정평가를 통해 정기적으로 사업의 진행과정을 점검할 필요가 있다 하겠다. 따라서 신재생에너지 분야의 사업의 관리에 적용될 수 있는 EERE의 과정평가를 한국의 상황에 맞게 수정하고 이를 정규적으로 시행하는 방안에 대한 논의가 필요하다 하겠다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1507-1515
• /
• 2015

The aim of this study was to suggest an enhancement of pedestrian safety through a service design process regarding urban design in new-town area. For this study, the concept, process and touchpoint, and survey design area, of the service design are reviewed as a theoretical study. According to this study, traffic signals, pedestrian environment, pedestrian overpass, and access traffic road were surveyed as touchpoints and a problem search, concept design, design building, institutional implement were analyzed as a service design process. As a result of these studies, the planning method for pedestrian safety based on service design process in terms of the external space design in a new-town area are suggested.

• Knowledge Management Research
• /
• v.20 no.2
• /
• pp.155-182
• /
• 2019

The purpose of this study is to evaluate the concept of the Business Art and the validity of the Business Art making process model, as well as to confirm the creative value of art in the business environment. The research data were collected using in-depth interviews and the collected data were analyzed by applying the grounded theory. As a result of the study, various experts in the fields of business and arts evaluated the concept of the Business Art and contents of the Business Art process model as generally valid, considering that they were actually applicable in light of their own experiences. This study establishes a new theory by verifying the transferability of academic research on the new concept of the Business Art, and presents a new viewpoint different from the existing one in the relationship between business and art. Also, the implication of this study lies in that it provided the basis for establishing the method and system that apply the concept of the Business Art and its process to business in the future.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.75.1-75.1
• /
• 2010

This research presents a fuel cell simulator for control logic verification and operator training. Nowadays, power industries are focusing on clean energy as a response to new policy. The fuel cell can be the solution for clean energy, but operating technology is not well developed compared to other conventional power plans because of its short history. Therefore we need a simulator to verify the new control strategy and train operators, because the price of a real fuel cell system is too high and mechanically weak to be used for these kind of purposes. To develop the simulator, a 300 KW MCFC(Molten Carbonate Fuel Cell) system was modeled with stack, BOPs(pre-reformer, steam generator, etc) and mechanical components(valves, pipes, pumps, blowers, etc). The process model was integrated to emulated control system and HMI(Human Machine Interface). A static load and open loop tests were conducted for verifying the accuracy of the process model, since it is the most important part in the simulation. After verifying the process model, an automatic load change and start-up tests were conducted to verify the performance of a new control strategy(logic and functional loops).

• Transactions of Materials Processing
• /
• v.26 no.2
• /
• pp.115-120
• /
• 2017

Porthole extrusion process is a very effective metal forming process to produce aluminum profiles with hollow sections. The structure of porthole extrusion die is very complex. In this process, the billet is divided by porthole bridge, and then the divided billet is welded in the welding chamber. The welding pressure in the welding chamber is very important. The higher welding pressure improves the quality of the aluminum profiles. Therefore, the objective of this study is to develop a new porthole extrusion die for improving the welding pressure in the welding chamber by using numerical analysis. The effectiveness of the new porthole extrusion die was verified by using numerical analysis. Through numerical analysis, the welding pressures in the welding chamber between the new porthole die and the conventional porthole die were compared with each other.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.773-775
• /
• 2004

For high end, large area displays, all current LC modes require some degree of optical compensation to improve the front of screen viewing experience. Currently most optical films are laminated to the outside of the LCD cell, between the glass and polariser. In this paper we wish to show how it is possible to integrate the compensating optical film within a VA mode LCD cell. The paper will describe the process of making the biaxial film through the process of in-situ photopolymerisation of an aligned film of reactive mesogens in the cholesteric phase using polarised UV light. The film can be made on the colour filter array side of the LCD panel. In addition the process of fabricating a VA mode LCD containing this film will be described and the performance of this module will be presented

• The Journal of the Korea Contents Association
• /
• v.17 no.4
• /
• pp.229-236
• /
• 2017

Technology foresight is the process which investigate long term science, technology, economic and social effects to derive strategic R&D and future promising technologies. This study shows that new systematic framework based on technology classifications of space and action in human society, future six senses was employed as a new research method for effective process of future technology foresight. In addition, to increase the acceptance, forecasting, and uniqueness of new technology, we derived major issues of future society and demand-base products and services through the new process of ICT future mega trend analysis, the findings and selections of future technology, and future scenario based on human six senses.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2637-2643
• /
• 2010

In order to develop a new line injection system for spin draw yarn (FD SDY) fibers, the effect of various parameters in extrusion and melt line conditions on the dispersion and distribution of $TiO_2$ particles within FD PET fibers was investigated. As a result, the dispersibility of $TiO_2$ particles in a PET matrix is found to depend on the particle size and its surface characteristics. Surface modification of $TiO_2$ by dimethyl polysiloxane resulted in the improved dispersibility and affinity of $TiO_2$ particles in the PET matrix. Especially, residence time, mixing temperature, and mixing shear rate in the new line injection system under the SDY spinning process were very important parameters to minimize the agglomeration of $TiO_2$ particles. The FD SDY prepared by the new line injection system was superior to those using the polymerization process and the conventional masterbatch chip dosing process in the color-L and color-b values of the fibers.