• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.6
• /
• pp.713-721
• /
• 1998

In this paper a new modeling and an optimal pole-placement control for the suspension system of Macpherson type are investigated. The rotational motion of the unsprung mass is emphasized in the new modeling. The two generalized coordinates selected in the new model are the vortical displacement of sprung mass and the angular displacement of control arm. Both variables are measured from their static equilibrium points. It is shown that the conventional model is a special case of the new model since the transfer function of the new model coincides with that of the conventional one if the lower support point of the shock absorber is located at the mass center of the unsprung mass. It is also shown that the resonance frequencies of the new model agree better with experimental results. Therefore, the new model is more general in the sense that it Provides an extra degree of freedom in determining the plant model for control system design. An optimal pole-placement control which combines LQ control and pole-placement technique is applied to the new model. Simulations are provided.

• Journal of the military operations research society of Korea
• /
• v.8 no.1
• /
• pp.53-70
• /
• 1982

This thesis develops a more realistic and applicable new set covering model that is adjusted and supplied by the existing set covering models, and induces an algorithm for solving the new set covering model, and applies the new model and the algorithm to an actual set covering problems. The new set covering model introduces a probabilistic covering aistance ($0{\eqslantless}p{\eqslantless}1$)or time($0{\eqslantless}p{\eqslantless}1$) instead of a deterministic covering distance(0 or 1) or time (0 or 1) of the existing set covering model. The existing set covering model has not considered the merit of the overcover of customers. But this new set covering model leads a concept of this overcover to a concept of the parallel system reliability. The algorithm has been programmed on the UNIVAC 9030 for solving large-scale covering problems. An application of the new set covering model is presented in order to determine the locations of the air surveillance radars as a set covering problem for a case-study.

• International Journal of Quality Innovation
• /
• v.3 no.2
• /
• pp.84-92
• /
• 2002

In this Paper, We propose new performance measure model in Logistic Industry. New model has been learned by key points of PZB model and advanced structure of MBNQA which has cause measure points and effect measure points. The Structure of new performance measure model is Cubic Model which is reflected with time. We try to verify this model apply advance logistic company.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2E
• /
• pp.27-31
• /
• 1997

This paper proposes a new rejection algorithm which distinguishes unregistered spoken words(or non-keywords) from registered vocabulary. Two kinds of garbage models are employed in this design ; the original garbage model and a new word garbage model. The original garbage model collects all non-keyword patterns where the new word garbage model collects patterns classified by recognizing each non-keyword pattern with registered vocabulary. These two types of garbage models work together to make a robust reject decision. The first stage of processing is the classification of an input pattern through the original garbage model. In the event that the first stage of processing is ambiguous, the new word dependent garbage model is used to classify thye input pattern as either a registered or non-registered word. This paper shows the efficiency of the new word dependent garbage model. A Dynamic Multisection method is used to test the performance of the algorithm. Results of this experiment show that the proposed algorithm performs at a higher level than that of the original garbage model.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.231-236
• /
• 2008

The purpose of this study is to develop assessment model for selection of new DSM investment programs. In this research, MAUT method which find assessment value by each attributes related to selecting new DSM investment programs using utility function and integrate with structural frame was used to develop assessment model. In order to validate the usefulness of the model, assessment model was applied for actual candidate group of new DSM investment programs in natural gas domain. By utilize this assessment model to select new DSM investment programs, it is expected to minimize risk of new program launching and to maximize efficiency of DSM investment programs.

• New & Renewable Energy
• /
• v.1 no.1 s.1
• /
• pp.54-63
• /
• 2005

A critical issue in the field of the rotor aerodynamics is the treatment of the wake. The wake is of primary importance in determining overall aerodynamic behavior, especially, a wind turbine blade includes the unsteady airloads problem. In this study, the wake generated by blades are depicted by a free wake model to analyse unsteady loading on blade and a new free wake model named Finite Vortex Element(FVE hereafter) is devised in order to include a wake-tower interaction. In this new free wake model, blade-wake-tower interaction is described by cutting a vortex filament when the filament collides with a tower. This FVE model is compared with a conventional free wake model and verified by a comparison with NRELand SNU wind tunnel model. A comparison with NREL and SNU data shows validity and effectiveness of devised FVE free wake model and an efficient.

• Journal of Information Technology Applications and Management
• /
• v.14 no.4
• /
• pp.175-198
• /
• 2007

Technology Acceptance Model (TAM) has been a basis model for testing technology use. Post researches of TAM have been conducted with the updating the TAM by adding new independent variables in order to increase the explanation power of the model. However, one problem is that different independent variables have to be introduced to keep the explanation power whenever applying to particular technology. This reduces the generality of the research model. Thus in order to increase the generality of the model, this study reviewed the previous researches and collected the independent variables used, and regrouped them into three basic independent constructs. New research model was designed with three basic independent constructs with four constructs selected for the mandatory IT environment and voluntary IT environment, and the structured equations analysis(AMOS) was applied to find the significant causal effect relationships between constructs in addition to the explanation power of the model. Finally, this study concluded that new TAM could be used to explain the users' adopting new technology without any adding new particular independent variables.

• Journal of Digital Convergence
• /
• v.7 no.3
• /
• pp.13-24
• /
• 2009

Technology Acceptance Model (TAM) has been a basis model for testing technology use. Post researches of TAM have been conducted with the updating the TAM by adding new independent variables in order to increase the explanatory power of the model. However, the problem is that different independent variables have to be required to keep the explanatory power whenever adopting particular technology. This might reduce the generality of the research model. Thus in order to increase the generality of the model, this study reviewed the previous researches and collected the independent variables used, and regrouped them into three basic independent constructs. New research model was designed with three basic independent constructs with three constructs selected for the involuntary information technology usage environment. Finally, this study concluded that new technology acceptance model could be used to explain the use of new technology without any adding new particular independent variables.

• Communications for Statistical Applications and Methods
• /
• v.10 no.3
• /
• pp.1007-1015
• /
• 2003

In this paper we introduced a new score generating function for the rank dispersion function in a general linear model. Based on the new score function, we derived the null asymptotic theory of the rank-based hypothesis testing in a linear model. In essence we showed that several rank test statistics, which are primarily focused on our new score generating function and new dispersion function, are mainly distribution free and asymptotically converges to a chi-square distribution.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.12
• /
• pp.31-38
• /
• 1997

A new CAD-compatible non-quasi-static (NQS) MOS transient model is presented. A new type of weighted residual method, the collcoatin method, is adopted to obtian an approximate ordinary differntial equation from the continuity eqation. Contrasting to the conventional NQS models, the new model can directly include the variatin of the depletion charge and the derived transient current sare expressed with only physically meaningful variables. The new model predicts transient behaviors reasonably well in the calculation including cutoff regions where the depletion charge rapidly changes.