• Archives of Plastic Surgery
• /
• v.36 no.6
• /
• pp.691-701
• /
• 2009

Purpose: Deviations of arterial palmar arches in the hand can be explained on the embryological basis. The purpose of this study was to provide new information about palmar arches through cadaver's dissection. The values of the location and diameter in these vessels were analyzed in order to support anatomical research and clinical correlation in the hand. Methods: The present report is based on an analysis of dissections of fifty - three hands carried out in the laboratory of gross anatomy. A reference line was established on the distal wrist crease to serve as the X coordinate and a perpendicular line drawn through the midpoint between middle and ring fingers, which served as the Y coordinate. The coordinates of the x and y values were measured by a digimatic caliper, and statistically analyzed with Student's t - test. Results: Complete superficial palmar archs were seen in 96.2 % of specimens. In the most common type of males, the superficial arch was formed only by the ulnar artery. In the most common type of females, the superficial arch was formed anastomosis between the radial artery and the ulnar artery. The average length of the superficial and deep palmar arch is $110.3{\pm}33.0mm$ and $67.9{\pm}14.0mm$ respectively. Regarding the superficial palmar arch, ulnar artery starts $-16.1{\pm}5.1mm$ on X - line, and $2.5{\pm}24.5mm$ on Y - line. Radial artery appears on palmar side $7.7{\pm}3.2mm$ on X - line, and $20.9{\pm}10.9mm$ on Y - line. But radial artery starts on $6.3{\pm}3.6mm$ on X - line, and $3.4{\pm}5.1mm$ on Y - line. Digital arteries of superficial palmar arch starts on $6.1{\pm}3.7mm$, $33.9{\pm}8.8mm$ on index finger, $1.8{\pm}3.4mm$, $40.1{\pm}7.3mm$ on middle finger, $-3.2{\pm}4.9mm$, $42.6{\pm}7.0mm$ on ring finger, and $-8.9{\pm}5.1mm$, $42.5{\pm}80mm$ on little finger in respective X and Y coordinates. Radial artery of deep palmar arches measured at the palmar side perforating from the dorsum of hand. It's coordinates were $9.7{\pm}4.8mm$ on X - line, $21.7{\pm}10.2mm$ on Y - line. Ulnar artery was measured at hypothenar area, and it's coordinates were $-20.4{\pm}6.3mm$ on X - line, and $30.6{\pm}7.4mm$ on Y - line. Conclusions: Anatomically superficial palmar arch can be divided into a complete and an incomplete type. Each of them can be subdivided into 4 types. The deep palmar arch is less variable than the superficial palmar arch. We believe these values of the study will be used for the vascular surgery of the hand using the endoscope and robot in the future.

• Journal of Technology Innovation
• /
• v.20 no.2
• /
• pp.75-107
• /
• 2012

Previous researches on technological innovation have several limitations such as lack of general mechanism for technological innovation(inputs, throughputs and outputs of technological innovation), large company oriented studies, and ignoring importance of technology management capabilities. So, this study suggested a new model using resource-based theory and system theory, and empirically applied that to SMEs. Structural equation model analysis by using 223 SMEs in Daegu region provided a support for most of hypotheses. Research results showed that all of factors on technological innovation were significantly and positively related with each other: inputs(R&D leadership, innovation strategy, R&D investment, R&D human resource management, external network), throughputs(portfolio management, project management, technology commercialization) and output(technological innovation). In case of technological innovation inputs, R&D leadership influenced on innovation strategy positively and significantly. And R&D leadership and innovation strategy had positive and significant effects on R&D investment, R&D human resource management and external network. R&D human resource management and external network exerted positive and significant influences on technological innovation throughputs such as portfolio management and project management. But R&D investment did not significant impacts on technological innovation throughputs. Among technological innovation throughputs, both portfolio management and project management had positive and significant effect on technology commercialization. In addition, technology commercialization acted positively and significantly technological innovation output. This study suggests necessary of efforts to implement innovation strategy and manage R&D human resource effectively based on CEO's innovativeness and entrepreneurship. Also, if SMEs want to develop technology and commercialize it, they have to cooperate with external technology resources and informations. Research results revealed that proper level of R&D investment, internal and external communication, information sharing, and learning and cooperative culture were very important for improvement of technological innovation performance in SMEs. Especially, this research suggested that if SMEs manage technological innovation process effectively based on resource-based and system approaches, then they can overcome their resource limitations and gain high technological innovation performance. Also, useful policy support for technological innovation of central or regional government by this research model is important factor for SMEs' technological innovation performance.

• Radiation Oncology Journal
• /
• v.20 no.4
• /
• pp.359-366
• /
• 2002

Purpose : The purpose of the present study was to analyze and evaluate prior studies published in Korea on the cancer-related quality of life, in order to make recommendations for further research. Materials and Methods : A total of 31 studies were selected from three different databases. The selected studies were analyzed according to 11 criteria, such as site of cancer, domain, independent variable, research design, self/proxy rating, single/battery instrument, translation/back translation, reliability, validity, scoring, and findings. Results : Of the 31 studies, approximately half of them were conducted using a mixed cancer group of patients. Many of the studies asserted that the concept of quality of life had a multidimensional attribute. Approximately 30% were longitudinal design studies giving information about the changes in quality of life. In all studies, except one, patients directly rated their level of quality of life. With respect to the questionnaires used for measuring the quality of life, most studies did not consider whether or not their reliability and validity had been established. In addition, when using questionnaires developed in other languages, no studies employed a translation/ back-translation technique. All studies used sum or total scoring methods when calculating the level of quality of life. The types of variables tested for their influence on qualify of life were quite limited. Conclusion : It is recommended that longitudinal design studies be peformed, using methods of data collection whose validity and reliability has been confirmed, and that studies be conducted to identify new variables having an influence on the quality of life.

• Journal of the Korean Society of Radiology
• /
• v.5 no.3
• /
• pp.135-141
• /
• 2011

If protective performance of apron cannot be good, radiation exposure of an guardian or a patient, a person engaged in radiation related industry cannot rise. Therefore, It will be evaluated protection performance to radiation protection aprons by manufacturers and lead equivalent more than 0.25mm lead equivalent. And, will show in the direction of application to clinic. The new aprons by manufacturers(H, X, I, J company) and lead equivalent(0.50mmPb, 0.35mmPb, 0.25mmPb) measured transmitted dose rate and shielding rate, uniformity under fluoroscopy and general radiography using to fluoroscopy system and digital radiography system, x-ray multifunction meter. The shielding rate measurement results, 0.5mmPb apron was Shielding rate of apron of a I company(fluoroscopy : 97.96%) was the best under six companies, and shielding rate of apron of a J company(fluoroscopy : 96.25%) was worst. 0.35mmPb Apron was Shielding rate of a I company(fluoroscopy : 96.79%) was the best under the three companies, and shielding rate of an H company(fluoroscopy : 95.81%) was the worst. 0.25mmPb Apron was Shielding rate of X company apron(fluoroscopy : 90.908%) was better than H company apron(fluoroscopy : 88.82%) than two companies. The uniformity measurement results, 0.5mmPb Aprons of X company(fluoroscopy : 0.13) and I company(fluoroscopy : 0.19) was the best under the six companies, and J company apron(fluoroscopy : 0.45) was the worst. 0.35mmPb. Along a manufacturer and lead equivalent performance of apron protection is distinguished certainly. Therefore, a patient, guardian or a person engaged in radiation related industry shall enforce experiment of a lot of ways defined or evaluation so that the maximum reduces radiation exposure. Buy the apron that protective performance is good, It will be performed through experiment and evaluation.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.2
• /
• pp.107-117
• /
• 2004

If doubtlessly contributes much to agriculture and rural development. The roles can be summarized as; 1. to activate rural areas and to provide more comfortable and safe rural life with equivalent services to those in urban areas, facilitating distance education, tole-medicine, remote public services, remote entertainment etc. 2. To initiate new agricultural and rural business such as e-commerce, real estate business for satellite officies, rural tourism and virtual corporation of small-scale farms. 3. To support policy-making and evaluation on optimal farm production, disaster management, effective agro-environmental resource management etc., providing tools such as GIS. 4. To improve farm management and farming technologies by efficient farm management, risk management, effective information or knowledge transfer etc., realizing competitive and sustainable farming with safe products. 5. To provide systems and tools to secure food traceability and reliability that has been an emerging issue concerning farm products since serious contamination such as BSE and chicken flu was detected. 6. To take an important and key role for industrialization of farming or lam business enterprise, combining the above roles.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.4
• /
• pp.510-517
• /
• 2015

Miscanthus has been considered as the most promising bioenergy crop for lignocellulosic biomass production. In Korea, M. sacchariflorus and M. sinensis can be found easily in all regions. It is a great advantage to utilize as important species with respect to genetic and cross-breeding programs materials for creation of novel hybrids. For successful breeding programs, it is important to precisely understand the variability of flowering traits among Miscanthus species as breeding parents materials. In this study, flowering traits were observed daily in 960 germplasms of two Miscanthus species (M. sacchariflorus and M. sinensis) for growing seasons over 2 years. The flowering process was divided into three stages. ST (sprouting time) was recorded when first leaf of the plant emerged on soil. FS1 (flowering stage 1) and FS2 (flowering stage 2) were recorded when flag leaf was firstly observed, and 1 cm of panicle was showing on at least one stem, respectively. For 2013 and 2014, the latest germplasms exerted flag leaf, i.e. September 30 (DOY of FS1 164.1) and September 4 (DOY of FS1 141.0) occurred M. sacchariflorus cv. Geodae 1 and M. sacchariflorus cv. Uram collected from Southern Korea (Jeollanam-do), while Miscanthus germplasms collected from northern Korea (Gyeonggi-do) which emerged the earliest flag leaf in July and August, significantly decreased DOY. For DOY from ST to FS2, M. sacchriflorus germplasms ranged from 140 to 190 days, and 110 to 170 days for 2013 and 2014. The highest frequency showed to 160 days for 2013, and 150 days for 2014. In M. sinensis germplasms, the highest frequency showed to 180 days for 2013, and 170 days for 2014. In the results of correlation between the day of years from ST to FS2 for 2013 and 2014, M. sacchriflorus and M. sinensis showed high coefficient of correlation (0.70 and 0.89). It can be supposed that flowering characteristics of Miscanthus are largely affected by the unique phenotypic characteristic of native habitat than environmental factors of the current planted site. This study for flowering traits of Miscanthus may provides an important information in order to expedite the introduction as breeding materials for creation of new hybrid.

• Archives of design research
• /
• v.16 no.1
• /
• pp.181-198
• /
• 2003

The purpose of this study is to develop a on-line design tool for effectively coping with e-Business environment, or product design process into a Cyber model for traditional manufacturers which attempts new product development under such environment. It was finally developed as a model named $\ulcorner$Design Vortal Site; e-BVDS) that was based on the structure and style of internet web site. Results of the study can be described as follows ; \circled1 e-Business is based on the Internet. All processes in the context of e-Business require models whose structure and method of use are on-line styles. \circled2 In case that a traditional manufacturing business is converted into e-Business, it is better to first consider Hybrid Model that combines resources and advantages of both such traditional and digital businesses. \circled3 The product design process appropriate for e-Business environment has to have a structure and style that ensure utilization of the process as an Internet web site, active participation by product developers and interactive communication between participants in designing and designers. \circled4 $\ulcorner$e-BDVS) makes possible the use of designers around the wend like in-house designers, overcoming lack in creativity, ideas and human resources traditional business organizations face. However, the operation of $\ulcorner$e-BDVS$\lrcorner$ requires time and budget investments in securing related elements and conditions. \circled5 Cyber designers under $\ulcorner$e-BDVS$\lrcorner$ can easily perform all design projects in cyber space. But they have some limits in playing a role as designers and they have difficulty in getting rewards if such projects completed by them are not finally accepted. \circled6 $\ulcorner$e-BDVS) ensures the rapid use of a wide range of design information and data, reception of a variety of solutions and ideas and effective design development, all of which are not possible through traditional processes. However, this process may not be suitable to be used routine process or tool. \circled7 $\ulcorner$e-BDVS$\lrcorner$ makes it possible for out-sourcing or partners businesses to overcome restrictions in time and space and improve productivity and effectiveness. But such they may have to continue off-line works that can not be treated on-line.

• Journal of Gifted/Talented Education
• /
• v.11 no.2
• /
• pp.127-150
• /
• 2001

The upcoming century is a knowledge based society which did not exist before which requires creative ability to solve problems. Therefore, it is necessary to Provide a creative program of problem solution in order to match this global trend The creativity of problem solution means the ability to solve a problem using previous ideas in an advanced way or develop new ideas. Creative education is especially important for infants. Because the young mind is where fresh ideas preside and can frame-work the early stage of life like a blank sheet of paper. The Infant-Early Child Creative Development Institute. as an adhesive institute at Yeungjin College, develops various programs that integrate methods which match current trend in this era and also start the Creative Promotion Test with 2,000 Families for the expansion of creative education from the baseline as an alternative method. The infants tested in the creative test will find ways of problem solution through animation beam projects for their given situation and also discuss the problems with their family members. Through these processes the infant and family members will complete the creative structures to solve the problems using limited materials given by the institute, and the final product will be evaluated as objective results. The final evaluation of the test will also be considered the teamwork of family cooperation and the attitudes of participants as well as the product of problem solution. The criterion of the evaluation is to be considered both a creative way of thinking and creative attitudes. Because the score counts were conducted manually it delayed the selection of awarded students who took the test. Also, we found that some parents have difficulty in accessing information to find the score through homepage from the computer. this Problem might be corrected in the future plan. Like Freud's saying, if human character and exploring attitudes during the early stage of a child, a person's creativity is composed their infant period as their basic foundation. Therefore, the family wh first environment the infant encounters will be treated as a prima when making basic structure. From this viewpoint, this creative test work as a festival of creativity fare with 2,000 families.

• Tuberculosis and Respiratory Diseases
• /
• v.50 no.2
• /
• pp.222-228
• /
• 2001

Backgrounds : Recent technological developments have introduced a new method to identifying M. tuberculosis complex DNA in clinical samples directly. The direct amplification test (DAT) is approved for identifying M. tuberculosis complex in respiratory specimens that are smear-positive for acid-fast bacilli (AFB). When there is a discrepancy between the AFB smear and DAT, no information on their clinical utility is currently available. In this study, the diagnostic reliability of DAT was investigated in suspected pulmonary tuberculosis patients whose sputum AFB smear was negative. Methods : From June 1, 1998 through May 30, 1999, 909 patients with presumed active pulmonary tuberculosis were enrolled. A sputum AFB stain, culture, DAT and/or biopsy were performed. Using the criteria of clinical tuberculosis or confirmed tuberculosis, the positive predictive value of DAT in diagnosing pulmonary tuberculosis was investigated. Results : The positive predictive value of DAT was 82.1% by the clinically active tuberculosis criteria. However, it decreased to 61.5% when diagnosis was restricted to only to culture positive or biopsy proven cases. The false positive rate of DAT was 18.0%. Conclusion : The DAT is a valuable diagnostic method in suspected patients whose sputum AFB is was negative.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.1
• /
• pp.36-43
• /
• 1999

Background : Tumor growth is the net result of intrinsic proliferation and escape from active cell death. bcl-2 is a member of a new category of oncogenes that is not involved in influencing cell proliferation but is involved in regulating cell death(apoptosis). Based on this information, it seems to be reasonable to expect that there may be clinical prognostic significance of bcl-2 expression in non-small cell lung cancer. But its prognostic significance is not established. Methods: To investigate the role of bcl-2 in lung cancer, we performed immunohistochemical stain of bcl-2 on 57 biopsy specimens from resected primary non-small cell lung cancer. Thereafter, flow cytometric cell cycle analysis was done. And we analyzed the correlation between bcl-2 expression, clinical parameters, S-, $G_1$-phase fraction and survival. Results: bcl-2 were detected in 43.8% of total 57 patients(according to histology, squamous cancer 47%, adenocarcinoma 32%, according to TNM stage, I 28.6%, II 52.3%, III 45.5%. both differences were insignificant). By using the flow cytometric analysis, mean S-phase fraction of bcl-2(+) and (-) group were 14.1($\pm7.8$)%, 24.7($\pm10.5$)% (p<0.005), mean $G_1$-phase fraction of bcl-2(+) and bcl-2(-) group were 75.5($\pm10.8$)%, 65.5($\pm11.4$)%(p<0.05). 2yr, 3yr and 5yr survival and median survival time of bcl-2(+) group were 65%, 54%, 41%, 53 months, and those of bcl-2(-) group were 71%, 52%, 46%, 37 months. (p>0.05, Kaplan-Meier, log rank) Conclusion: bcl-2 was detected in 43.8% of primary non-small cell lung cancer. The S-phase fraction of bcl-2(+) group was less than bcl-2(-) group, and G1-phase fraction of bcl-2(+) group was more than bcl-2(-) group. But, expression of bcl-2 could not be a prognostic factor.