• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.573-577
• /
• 2015

Safety is paramount for construction industry throughout the world. Human errors which contribute to more than half of construction accidents, could be proactively prevented through effective education and training methods. Although Virtual Reality (VR) and Augmented Reality (AR) have gained much attention in various disciplines, few studies applied them for construction safety education. This research presents a new approach in construction safety education by utilizing VR and AR. The vision of aligning teaching & learning strategies is examined in order to ensure the potential benefits of the new method. This innovative approach shifts safety education from "Listen, and I will forget. See, and I may remember" towards "Practice, and I understand".

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.895-898
• /
• 2008

본 연구는 최근 국내의 옹벽 및 교대의 신기술 특허 등록 동향을 조사하여 파악하며, 이들 신기술특허를 적절히 실제 옹벽 및 교대 공사에 적용하려는데 목적을 두고 있다. 본 연구에서 조사된 신기술옹벽으로는 PS강봉에 프리스트레스를 도입한 단면력 저감형 조립식 PC옹벽공법, Coupler-Tension 조립식 옹벽, 도로용 블록식 보강토옹벽, 균등침하를 유도할 수 있는 블록식 보강토옹벽이 있으며, 신기술 교대로는 시트파일을 이용한 교대의 시공공법, 일체식 복합교대 교량, 반 일체식 교대교량의 시공방법, 보강토 교대구조를 기술하였다.

• 한국통신학회논문지
• /
• 제34권2C호
• /
• pp.169-174
• /
• 2009

본 논문에서는 이진 낮은 상관 구역 수열군의 새로운 생성법을 제안한다. 새로운 수열군은 Kim과 Jang, No, Chung이 제안한 4진 낮은 상관 구역 수열군에 Gray 사상을 적용하여 생성한다. 새로 생성된 이진 수열군의 주기는 생성에 사용한 4진 수열군의 주기의 2배이며, 낮은 상관구역 내 상관 값의 최대 크기 및 수열군의 크기는 생성에 사용한 수열군의 그것의 2배가 된다. 그러나 낮은 상관 구역의 크기는 그대로 유지된다. 생성에 사용한 4진 낮은 상관 구역 수열군의 최적인 경우 새로 생성된 이진 수열군은 높은 확률로 최적의 수열군이 된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.127-132
• /
• 2003

The purpose of current study is about how to construct wall-type APT in slip form and Deck plate applied different connection of materials that wall and slab. A proposal construct's solution is using the continuous a binding string that the main of contents are slab or stairs which horizon structure part construction is joined the vertical structure part, new we Proposed of 2 solution that new technology development. We'll suggest that the development is in the construct of higher stories APT more better other construction method. We expect that the new method is good but we have many things to solute themes. Thus, we decided that this development contents are needed that correct structural investigation and constructor's security of speciality and through a fact construct, correct verification.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.754-755
• /
• 2015

In this research, moisture contents and roof deflection of two test-bed Korean traditional timber houses, Hanoks, were monitored. The monitored houses are consisted of two types of Hanoks. One is a one-story traditional Hanok built by traditional construction method, and the other is a two-storied new-styled Hanok built by modernized construction method. The monitoring has been carried out for about thirty months. The moisture contents and roof deflections were analyzed and compared. The moisture contents of the traditional Hanok built by raw wood were somewhat higher than that of the new-styled Hanok built by glued structural wood. The mean vertical deflection of angle rafters of traditional Hanok is about twice more than that of the new-styled Hanok.

• 기술사
• /
• 제39권6호
• /
• pp.42-48
• /
• 2006

This is briefly to introduce about design and construction method newly adopted in Incheon bridge construction site. The Incheon Bridge Project are divided into 3 parts, that is Cable Stayed Bridge. Viaduct Bridge and Approach Bridge. In this paper, we will describe overview and construction sequence of each kind part.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.9-12
• /
• 2006

In recent years, construction site has developed lots of new methods and materials for Time-Cost Trade-off and improving constructability. In the case of underground construction, especially, there are many restrictions and difficulties. Shortening of the construction time in construction of underground, we use top-down method in undergroud wall. A open slab has been designed for the purpose of overcoming a weak point of former top-down method. This study based on open slab on the under ground top-down method, to more improve constructability, to introduce the effect and the performance of top-down method.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 가을 학술발표회논문집
• /
• pp.32-37
• /
• 1993

A method of tunnel analysis for a new type of tunnel construction method (ACLCM, Automatic Concrete Lining Construction Method) is presented here. ACLCM is an unique tunnel construction method which provides concrete lining at the end of shield machine by extruding concrete into the space between the excavated ground surface and the inner form (Automatic Concrete Lining Machine). Since behaviors of tunnel and the surrounding soils are greatly influenced by the construction method, existing tunnel design methods may not be applicable to the design of ACLCM tunnel. In this study, a method of ACLCM tunnel analysis is suggested to provide the prediction of behavior of ACLCM tunnel and surrounding soils as well as to check up the safety during the construction and after the completion of ACLCM tunnel

• Journal of Construction Engineering and Project Management
• /
• 제3권2호
• /
• pp.21-34
• /
• 2013

Various risk factors affect construction projects. Due to the uncertainties created by risk factors, actual activity durations frequently deviate from the estimated durations in either favorable or adverse direction. For this reason, evaluation of schedule uncertainty is required to make decisions accurately when managing construction projects. In this regard, this paper presents a new computer simulation model - the Repetitive Schedule Risk Analysis Model (RSRAM) - to evaluate unit-based repetitive building project schedules under uncertainty when activity durations and risk factors are correlated. The proposed model utilizes Monte Carlo Simulation and a Critical Path Method based repetitive scheduling procedure. This new procedure concurrently provides the utilization of resources without interruption and the maintenance of network logic through successive units. Furthermore, it enables assigning variable production rates to the activities from one unit to another and any kind of relationship type with or without lag time. Details of the model are described and an example application is presented. The findings show that the model produces realistic results regarding the extent of uncertainty inherent in the schedule.

• 대한안전경영과학회지
• /
• 제17권3호
• /
• pp.23-32
• /
• 2015

Recently, the Ministry of Labour, published clause 2 of Article 41 (Risk Assessment) of the Act "Industrial Safety and Health" dated 12 June 2013 in connection with continuous increase of accidents at construction sites in order to prevent accidents in industrial safety and health in new construction in accordance with the risk assessment on construction projects are realized after March 13, 2014. In this paper, positive method of calculating risk discussed by performing research the awareness of general contractors and sub-contractors with presenting risky situation is considered. The purpose will be a positive method of calculating risk and would be a sufficient base and give a positive direction in the development of new systems currently working in the construction and risk assessment which consider the characteristics of sufficient risk assessment system for future research.