• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.2 no.1
• /
• pp.33-37
• /
• 2002

Insulation aging diagnosis system provides early warning regarding electrical equipment defects. Early warning is very important in that it can avoid great losses resulting from unexpected shutdown of the production line. Since relations of insulation aging and partial discharge dynamics are non-linear. it is very difficult to provide early warning in an electrical equipment. In this paper, we propose the design method of insulation aging diagnosis system that use a electromagnetic wave and acoustic signal to diagnose an electrical equipment. Proposed system measures the partial discharge on-line from DAS(Data Acquisition System and acquires 2D patterns from analyzing it. For filtering the noise contained in sensor signals we used ICA algorithms. Using this data, we design of the neuro-fuzzy model that diagnoses an electrical equipment and is investigated in this paper. Validity of the new method is asserted by numerical simulation.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2120-2122
• /
• 2002

There are several types of control systems that use fuzzy logic controller as a essential system component. The majority of research work on fuzzy PID controller focuses on the conventional two-input PI or PD type controller. However, fuzzy PID controller design is a complex task due to the involvement of a large number of parameters in defining the fuzzy rule base. In this paper we combined conventional PI type and PD type fuzzy controller and set the initial parameters of this controller from the conventional PID controller gains obtained by Ziegler-Nichols tuning or other coarse tuning methods. After that, by replacing some of these parameters with sing1e neurons and making them to be adjusted by back-propagation learning algorithm we designed a neuro-fuzzy controller which showed good performance characteristics in both computer simulation and actual application.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.315-320
• /
• 2005

This paper is proposed adaptive fuzzy-neuro controller for high performance of induction motor drive. The design of this algorithm based on fuzzy-neural network controller that is implemented using fuzzy control and neural network. This controller uses fuzzy rule as training patterns of a neural network. Also, this controller uses the back-propagation method to adjust the weights between the neurons of neural network in order to minimize the error between the command output and actual output. A model reference adaptive scheme is proposed in which the adaptation mechanism is executed by fuzzy logic based on the error and change of nor measured between the motor speed and output of a reference model. The control performance of the adaptive fuzy-neuro controller is evaluated by analysis for various operating conditions. The results of experiment prove that the proposed control system has strong high performance and robustness to parameter variation, and steady-state accuracy and transient response.

• Journal of Korea Water Resources Association
• /
• v.35 no.5
• /
• pp.631-638
• /
• 2002

Stochastic model has been widely used for the forecasting of time series. However, this study tries to perform the precipitation forecasting by fuzzy time series model using fuzzy concept. The published fuzzy based models are used for the forecasting of time series and also we suggest that the combination of fuzzy time series models and neuro-fuzzy system can increase the forecastibility of the models. The precipitation time series in illinois, USA is analyzed for the forecasting by the known fuzzy time series models and the suggested methodology in this study. As a result, we know that the suggested methodology shows more exact results than the known models.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.5
• /
• pp.417-422
• /
• 2000

In this paper, an efficient fuzzy rule generation scheme for adaptive neuro-fuzzy system modeling using the Independent Component Analysis(ICA) as a preprocessing is proposed. Correlation between inputs was not considered in the conventional neuro- fuzzy modeling schemes, such that enormous number of rules and large amount of error were unavoidable. The correlation between inputs is weakened by employing ICA so that the number of rules and the amount of error are reduced. In simulation, the Box-Jenkins furnace data is used to verify the effectiveness of the proposed method.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.4
• /
• pp.132-139
• /
• 2002

In GMAW(Gas Metal Arc Welding) processes, bead geometry (penetration, bead width and height) is a criterion to estimate welding quality. Bead geometry is affected by welding current, arc voltage and travel speed, shielding gas, CTWD (contact-tip to workpiece distance) and so on. In this paper, welding process variables were selected as welding current, arc voltage and travel speed. And bead geometry was reasoned from the chosen welding process variables using neuro-fuzzy algorithm. Neural networks was applied to design FL(fuzzy logic). The parameters of input membership functions and those of consequence functions in FL were tuned through the method of learning by backpropagation algorithm. Bead geometry could be reasoned from welding current, arc voltage, travel speed on FL using the results learned by neural networks. On the developed inference system of bead geometry using neuro-furzy algorithm, the inference error percent of bead width was within $\pm$4%, that of bead height was within $\pm$3%, and that of penetration was within $\pm$8%. Neural networks came into effect to find the parameters of input membership functions and those of consequence in FL. Therefore the inference system of welding quality expects to be developed through proposed algorithm.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.5
• /
• pp.472-479
• /
• 1999

In this paper, we propose a land cover pattern classifier for remote sensing image by using neuro-fuzzy algorithm. The proposed pattem classifier has a 3-layer feed-forward architecture that is derived from generic fuzzy perceptrons, and the weights are con~posed of h u y sets. We also implement a neuro-fuzzy pattern classification system in the Visual C++ environment. To measure the performance of this, we compare it with the conventional neural networks with back-propagation learning and the Maximum-likelihood algorithms. We classified the remote sensing image into the eight classes covered the majority of land cover feature, selected the same training sites. Experimental results show that the proposed classifier performs well especially in the mixed composition area having many classes rather than the conventional systems.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.2
• /
• pp.154-159
• /
• 2007

Wake distribution data of stem flow fields have been accumulated systematically by model tests. If the correlation between geometrical hull information and wake distribution is grasped through the accumulated data, this correlation can be helpful to designing similar ships. In this paper, Neuro-Fuzzy system that is emerging as a new knowledge over a wide range of fields nowadays is tried to estimate the wake distribution on the propeller plan. Neuro-Fuzzy system is well known as one of prospective and representative analysis method for prediction, classification, diagnosis of real complicated world problem, and it is widely applied even in the engineering fields. For this study three-dimensional stern hull forms and nominal wake values from a model test ate structured as processing elements of input and output layer, respectively. The proposed method is proved as an useful technique in ship design by comparing measured wake distribution with predicted wake distribution.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.4
• /
• pp.395-403
• /
• 2005

It is very important to forecast water supply for reasonal operation and management of water utilities. In this paper, water supply forecasting models using artificial intelligence are developed. Artificial intelligence models shows better results by using Temperature(t), water supply discharge (t-1) and water supply discharge (t-2), which are expressed by neural network(LMNNWS; Levenberg-Marquardt Neural Network for Water Supply, MDNNWS; MoDular Neural Network for Water Supply) and neuro fuzzy(ANASWS; Adaptive Neuro-Fuzzy Inference Systems for Water Supply). ANFISWS model which is applied for water supply forecasting shows stable application to the variable water supply data. As results, MDNNWS model shows the highest overall accuracy among proposed water supply forecasting models and the lowest estimation error with the order of ANFISWS, LMNNWS model.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1234-1239
• /
• 2006

신속하고 정확한 교통정보 서비스의 제공은 원활한 교통소통을 위하여 필수적인 요소이다. 특히, 교통사고, 도로보수 그리고 자연재해와 같은 유고가 발생할 경우, 운전자에게 즉시 통보해주어 우회할 수 있도록 조치하는 것이 필요하다. 이를 위하여 다양한 교통정보 수집기에서 수집된 교통정보를 바탕으로 실시간으로 유고상황을 판별하는 연구가 많이 진행되고 있다. 유고상황 분석은 다양한 환경요인으로 인해 판별이 어렵고, 최근에 활용되고 있는 인공지능 기법은 검지에 드는 시간 비용이 많다는 문제를 가지고 있다. 본 연구에서는 과거에 발생한 각종 돌발 상황을 분석하여 실시간으로 유고상황을 검지하는 것이 목적이다. 유고검지를 위해 GPS를 탑재한 probe car에서 수집된 차량속도와 온라인으로 제보된 유고정보를 ANFIS를 이용하여 분석 후 유고상태를 판별한다. 본 연구를 통해 실시간 도로 이용자들이 유고 발생 지역의 정보를 제공받고 그 상황에 신속하게 대처하게 함으로써 교통 혼잡 완화에 기여할 것으로 기대한다.