• 제목/요약/키워드: network-based distributed control system

Search Result 285, Processing Time 0.027 seconds

D-ARP Scheme for Full Mesh Routing in Partial BMA Network (제한적 BMA 네트워크에서 Full Mesh 라우팅을 위한 D-ARP 기법)

  • Kim, Moon
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.25 no.8
    • /
    • pp.1088-1094
    • /
    • 2021
  • This paper proposes a partial BMA (Broadcasting Multiple Access) network structure and D-ARP (Distributed Address Resolution Protocol) method in order to support full mesh routing function in the DAMA (Demand Assigned Multiple Access)-based MF-TDMA (Multi Frequency-Time Division Multiple Access) satellite system. The partial BMA network enables legacy router devices and routing protocols to be adopted in the satellite communication system, and decreases the amount of routing protocol overhead. In addition, we introduce the D-ARP method that help a spoke satellite node acquiring the MAC (Media Access Control) address from remote satellite nodes in none BMA satellite network. The D-ARP method provides the MAC address of remote nodes to each other nodes through the broadcasting-enabled satellite channel. And we lastly evaluate and analysis the network performance of the proposed approach.

An Enhanced Fast Handover Scheme for Real-Time Traffic in IPv6 Based WiBro Network (IPv6기반 와이브로 시스템에서 실시간 트래픽을 위한 개선된 빠른 핸드오버 방안)

  • Jeong, Seok-Jong;Lee, Sung-Kuen;Park, Jin-Woo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.4A
    • /
    • pp.377-386
    • /
    • 2008
  • In this paper, a new handover management scheme has been proposed to reduce handover latency and to support fast handover without packet losses, so that it may be applicable to the wireless mobile Internet system such as IPv6-based WiBro system. To minimize the handover latency in processing of movement detection, we propose the handover management scheme which simplifies the handover message exchanging procedure between mobile subscriber station (MSS) and network by integrating layer 2 and layer 3 handovers efficiently based on the layer2 information. To reduce the processing delay from new care-of-address (NCoA) configuration during handover, we propose that NCoA is created, distributed and managed by new access control router (NACR). In addition, in order to minimize the packet transmission delay and eliminate the packet losses, the proposed scheme employs a crossover router (CR) which is upper network located over PACR and NACR and employs the packet buffering for MSS. The simulation study shows that the proposed scheme achieves loss-free packet delivery and low latency in the environment of narrow overlapped cell area or high velocity of the MSS, comparing the performance with the conventional schemes.

A study on vulnerability analysis and incident response methodology based on the penetration test of the power plant's main control systems (발전소 주제어시스템 모의해킹을 통한 취약점 분석 및 침해사고 대응기법 연구)

  • Ko, Ho-Jun;Kim, Huy-Kang
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • v.24 no.2
    • /
    • pp.295-310
    • /
    • 2014
  • DCS (Distributed Control System), the main control system of power plants, is an automated system for enhancing operational efficiency by monitoring, tuning and real-time operation. DCS is becoming more intelligent and open systems as Information technology are evolving. In addition, there are a large amount of investment to enable proactive facility management, maintenance and risk management through the predictive diagnostics. However, new upcoming weaponized malware, such as Stuxnet designed for disrupting industrial control system(ICS), become new threat to the main control system of the power plant. Even though these systems are not connected with any other outside network. The main control systems used in the power plant usually have been used for more than 10 years. Also, this system requires the extremely high availability (rapid recovery and low failure frequency). Therefore, installing updates including security patches is not easy. Even more, in some cases, installing security updates can break the warranty by the vendor's policy. If DCS is exposed a potential vulnerability, serious concerns are to be expected. In this paper, we conduct the penetration test by using NESSUS, a general-purpose vulnerability scanner under the simulated environment configured with the Ovation version 1.5. From this result, we suggest a log analysis method to detect the security infringement and react the incident effectively.

HFN-Based Right Management for IoT Health Data Sharing (IoT 헬스 데이터 공유를 위한 HFN 기반 권한 관리)

  • Kim, Mi-sun;Park, Yongsuk;Seo, Jae-Hyun
    • Smart Media Journal
    • /
    • v.10 no.1
    • /
    • pp.88-98
    • /
    • 2021
  • As blockchain technology has emerged as a security issue for IoT, technology which integrates block chain into IoT is being studied. In this paper is a research concerning token-based IoT service access control technology for data sharing, which propose a possessor focused data sharing technic by using the permissioned blockchain. To share IoT health data, a Hyperledger Fabric Network consisting of three organizations was designed to provide a way to share data by applying different access control policies centered on device owners for different services. In the proposed system, the device owner issues access control tokens with different security levels applied to the participants in the organization, and the token issue information is shared through the distributed ledger of the HFN. In IoT, it is possible to lightweight the access control processing of IoT devices by granting tokens to service requesters who request access to data. Furthmore, by sharing token issuance information among network participants using HFN, the integrity of the token is guaranteed and all network participants can trust the token. The device owners can trust that their data is being used within their authorized rights, and control the collection and use of data.

Design and Test of On-Board Flight Data Acquisition System based on the RS485 Star Network (RS485 Star 구조의 비행체 탑재용 데이터 수집시스템 구현 및 성능시험)

  • Lee, Sang-Rae;Lee, Jae-Deuk
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.32 no.7
    • /
    • pp.83-90
    • /
    • 2004
  • This paper describes on-board decentralized data acquisition system that acquires and encodes the numerous sensor data distributed on the big flight vehicles efficiently. The system's sub-units which have one encoder unit and several remote units were designed and simulated according to the communication protocols and the control, sequence logics based on the FPGA chip. And we have made the functional verification of the acquisition, collection and formatting of remote analog and digital data for the manufactured hardwares.

A Priority-based Feedback Control Mechanism for Scalability (확장적 우선 순위 피드백 제어 기법)

  • 정상운;정원창;김상복
    • Journal of Korea Multimedia Society
    • /
    • v.2 no.3
    • /
    • pp.339-346
    • /
    • 1999
  • When a multicast video conference system utilizes RTP (Real Time Protocol) and RTCP (Real Time Control Protocol), the loss rate and the synchronization of transfer in RTCP affect the scalability of the system. The random delay technique introduced to resolve the problems is so simple that leads the network to meet some congestion in synchronizing feedback information when lots of people transfer the feedback information simultaneously, which reduces the scalability of system. In this paper, we propose a new feedback control algorithm that provides priority levels with the RTCP packet, which cuts down the feedback delay and increases the scalability. The criteria of providing priority Based on the decided priority level, Agent forced the session participants to provide much more RTCP packets, positively controlled, and the possible bandwidth can be measured. The simulation on this technique decreases the delay, and the feedback messages are equally distributed on a given time period.

  • PDF

OVERVIEW OF KSTAR INTEGRATED CONTROL SYSTEM

  • Park, Mi-Kyung;Kim, Kuk-Hee;Lee, Tae-Gu;Kim, Myung-Kyu;Hong, Jae-Sic;Baek, Sul-Hee;Lee, Sang-Il;Park, Jin-Seop;Chu, Yong;Kim, Young-Ok;Hahn, Sang-Hee;Oh, Yeong-Kook;Bak, Joo-Shik
    • Nuclear Engineering and Technology
    • /
    • v.40 no.6
    • /
    • pp.451-458
    • /
    • 2008
  • After more than 10 years construction, KSTAR (Korea Superconducting Tokamak Advanced Research) had finally completed its assembly in June 2007, and then achieved the goal of first-plasma in July 2008 through the four month's commissioning. KSTAR was constructed with fully superconducting magnets with material of $Nb_3Sn$ and NbTi, and their operation temperatures are maintained below 4.5K by the help of Helium Refrigerator System. During the first-plasma operation, plasmas of maximum current of 133kA and maximum pulse width of 865ms were obtained. The KSTAR Integrated Control System (KICS) has successfully fulfilled its missions of surveillance, device operation, machine protection interlock, and data acquisition and management. These and more were all KSTAR commissioning requirements. For reliable and safe operation of KSTAR, 17 local control systems were developed. Those systems must be integrated into the logically single control system, and operate regardless of their platforms and location installed. In order to meet these requirements, KICS was developed as a network-based distributed system and adopted a new framework, named as EPICS (Experimental Physics and Industrial Control System). Also, KICS has some features in KSTAR operation. It performs not only 24 hour continuous plant operation, but the shot-based real-time feedback control by exchanging the initiatives of operation between a central controller and a plasma control system in accordance with the operation sequence. For the diagnosis and analysis of plasma, 11 types of diagnostic system were implemented in KSTAR, and the acquired data from them were archived using MDSpius (Model Driven System), which is widely used in data management of fusion control systems. This paper will cover the design and implementation of the KSTAR integrated control system and the data management and visualization systems. Commissioning results will be introduced in brief.

Efficient Buffer Management Scheme for Mitigating Possibility of DDoS Attack (DDoS 공격 가능성 완화를 위한 효율적인 버퍼 관리 기술)

  • Noh, Hee-Kyeong;Kang, Nam-Hi
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.12 no.2
    • /
    • pp.1-7
    • /
    • 2012
  • DDoS attack is a malicious attempt to exhaust resources of target system and network capacities using lots of distributed zombi systems. DDoS attack introduced in early 2000 has being evolved over time and presented in a various form of attacks. This paper proposes a scheme to detect DDoS attacks and to reduce possibility of such attacks that are especially based on vulnerabilities presented by using control packets of existing network protocols. To cope with DDoS attacks, the proposed scheme utilizes a buffer management techniques commonly used for congestion control in Internet. Our scheme is not intended to detect DDoS attacks perfectly but to minimize possibility of overloading of internal system and to mitigate possibility of attacks by discarding control packets at the time of detecting DDoS attacks. In addition, the detection module of our scheme can adapt dynamically to instantly increasing traffic unlike previously proposed schemes.

Distributed processing for the Load Minimization of an SIP Proxy Server (SIP 프록시 서버의 부하 최소화를 위한 분산 처리)

  • Lee, Young-Min;Roh, Young-Sup;Cho, Yong-Karp;Oh, Sam-Kweon;Hwang, Hee-Yeung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.9 no.4
    • /
    • pp.929-935
    • /
    • 2008
  • As internet telephony services based on Session initiation Protocol (SIP) enter the spotlight as marketable technology, many products based on SIPs have been developed and utilized for home and office telephony services. The call connection of an internet phone is classified into specific call connections and group call connections. Group call connections have a forking function which delivers the message to all of the group members. This function requires excessive message control for a call connection and creates heavy traffic in the network. In the internet cail system model. most of the call-setup messages are directed to the proxy server during a short time period. This heavy message load brings an unwanted delay in message processing and. as a result, call setup can not be made. To solve the delay problem, we simplified the analysis of the call-setup message in the proxy server, and processed the forking function distributed for the group call-setup message. In this thesis, a new system model to minimize the load is proposed and the subsequent implementation of this model demonstrates the performance improvement.

A Study on the Natural Disaster Response Policy in Korea (재해방지정책의 개선방안에 관한 고찰 - 자연재해를 중심으로 -)

  • Kim, Jae-Pil;Kang, Soon-Min
    • The Korean Journal of Emergency Medical Services
    • /
    • v.5 no.1
    • /
    • pp.89-97
    • /
    • 2001
  • Recently, natural disasters happened to the Korea frequently. Disaster in the present society has been changed and increased it impacts and extent of danger as the society develops. So, Korean people feel uneasy about the unpredictable disaster. Therefore the capability of administration system, and cooperation and support between related organization become more necessary. This study aims to find out better ways of disaster management system which can protect people's lives and fortune from all sort of national disasters. To research policy reform, it is necessary to analyze disaster response organization(national disaster prevention countermeasures headquarters and so on), interorganizational relationship, law system etc. Especially, in this study, role appreciation of government was analyzed to get the rational policy reform measure. Suggestion : First, it is necessary Establishing a consolidated organization for disaster managing and united response organization is necessary such as Federal Emergency Management Agency(FEMA) which controls an over all aspects of disaster management. And it is necessary to develop Integrated Administrative Control System based on comprehensive plan. When the accidents happen, it needs to be many equipments and various specialized personnel. So, to manage a large scale of disaster, it is necessary to have interorganizational network system which many specialized organization including volunteer group are integrated. Also, as soon as the natural disaster happen, many professionals and volunteers are distributed to the spots of disaster in the right man in the right place. Finally, All the citizens have to keep safety rules, and also to take a safe action in ordinary daily life.

  • PDF