• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06d
• /
• pp.287-288
• /
• 2011

In this paper, we propose a hierarchical P2P architecture using clustering mobile peers. The proposed scheme utilizes the maximum connection time of connected peers to form the mobile network, which makes the network topology relatively stable. The connection time of connected peers can be determined by the location, velocity vector and communication range of each mobile peer. Therefore, the update overhead of the network is decreased and the success rate of contents search is increased. Experiments have shown that our proposed scheme outperforms the existing schemes.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1889-1892
• /
• 2002

In this paper, we propose the self-autonomous algorithm for mobile robot system (MRS). The proposed mobile robot system which is learned by learning with the neural network can trace the target at the same distances. The mobile robot can use ultrasonic sensors and calculate the distance between target and mobile robot. By teaming the setup distance, current distance and command velocity, the robot can do intelligent self-autonomous drive. We use the neural network and back-propagation algorithm as a tool of learning. As a result, we confirm the ability of tracing the target with proposed mobile robot.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.4
• /
• pp.293-298
• /
• 2006

In this paper, a sensor fusion based robot navigation method for the autonomous control of a miniature human interaction robot is presented. The method of navigation blends the optimality of the Fuzzy Neural Network(FNN) based control algorithm with the capabilities in expressing knowledge and learning of the networked Intelligent Robotic Space(IRS). States of robot and IR space, for examples, the distance between the mobile robot and obstacles and the velocity of mobile robot, are used as the inputs of fuzzy logic controller. The navigation strategy is based on the combination of fuzzy rules tuned for both goal-approach and obstacle-avoidance. To identify the environments, a sensor fusion technique is introduced, where the sensory data of ultrasonic sensors and a vision sensor are fused into the identification process. Preliminary experiment and results are shown to demonstrate the merit of the introduced navigation control algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.400-401
• /
• 2014

본 논문에서는 이동 에드혹 네트워크(Mobile Ad hoc Network: MANET)에서의 상황인식 기반의 스케쥴링 기법인 DDV(Dynamic Direction Vector)-hop알고리즘을 제안한다. 기존 MANET에서는 노드의 이동성으로 인한 동적 네트워크 토폴리지, 네트워크 확장성 결여의 대한 취약성을 지니고 있다. 본 논문에서는 계층적 클러스터 단위의 동적인 토폴로지에서 노드가 이동하는 방향성 및 속도에 대한 노드의 이동 속성 정보를 고려하여 클러스터를 생성 및 유지하는 DDV-hop 알고리즘을 제안한다. 제안된 알고리즘은 클러스터 헤드노드를 기준으로 클러스터 멤버노드의 방향성 및 속도의 속성 정보를 비교하여 유사한 노드간 클러스터링을 구성하고, 이로부터 헤드노드를 선택하는 방법이다. 실험결과, 제안하는 알고리즘이 네트워크의 부하를 감소시키고 네트워크 토폴로지를 안정적으로 유지할 수 있음을 확인하였다.

• The Journal of Engineering Geology
• /
• v.15 no.1
• /
• pp.67-76
• /
• 2005

This paper presents the application of a neural network for prediction of the unconfined compressive strength from physical properties and schmidt hardness number on rock samples. To investigate the suitability of this approach, the results of analysis using a neural network are compared to predictions obtained by statistical relations. The data sets containing 55 rock sample records which are composed of sandstone and shale were assembled in Daegu area. They were used to learn the neural network model with the back-propagation teaming algorithm. The rock characteristics as the teaming input of the neural network are: schmidt hardness number, specific gravity, absorption, porosity, p-wave velocity and S-wave velocity, while the corresponding unconfined compressive strength value functions as the teaming output of the neural network. A data set containing 45 test results was used to train the networks with the back-propagation teaming algorithm. Another data set of 10 test results was used to validate the generalization and prediction capabilities of the neural network.

• Structural Engineering and Mechanics
• /
• v.45 no.1
• /
• pp.53-67
• /
• 2013

This study aimed to develop a model to accurately predict the acceleration of structural systems during an earthquake. The acceleration and applied force of a structure were measured at current time step and the velocity and displacement were estimated through linear integration. These data were used as input to predict the structural acceleration at next time step. The computation tool used was the Volterra/Wiener neural network (VWNN) which contained the mathematical model to predict the acceleration. For alleviating problems of relatively large-dimensional and nonlinear systems, the VWNN model was utilized as the signal processing tool, including the Taylor series components in the input nodes of the neural network. The number of the intermediate layer nodes in the neural network model, containing the training and simulation stage, was evaluated and optimized. Discussions on the influences of the gradient descent with adaptive learning rate algorithm and the Levenberg-Marquardt algorithm, both for determining the network weights, on prediction errors were provided. During the simulation stage, different earthquake excitations were tested with the optimized settings acquired from the training stage to find out which of the algorithms would result in the smallest error, to determine a proper simulation model.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.505-510
• /
• 2000

Vehicle performances such as fuel consumption and catalyst-out emissions are affected by a driving pattern, which is defined as a driving cycle with the grade in this study. We developed an algorithm to recognize a current driving pattern by using a neural network. And this algorithm can be used in adapting the driving control strategy to the recognized driving pattern. First, we classified the general driving patterns into 6 representative driving patterns, which are composed of 3 urban driving patterns, 2 suburban driving patterns and 1 expressway driving pattern. A total of 24 parameters such as average cycle velocity, positive acceleration kinetic energy, relative duration spent at stop, average acceleration and average grade are chosen to characterize the driving patterns. Second, we used a neural network (especially the Hamming network) to decide which representative driving pattern is closest to the current driving pattern by comparing the inner products between them. And before calculating inner product, each element of the current and representative driving patterns is transformed into 1 and -1 array as to 4 levels. In the end, we simulated the driving pattern recognition algorithm in a temporary pattern composed of 6 representative driving patterns and, verified the reliable recognition performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.5
• /
• pp.2144-2165
• /
• 2016

In a vehicular ad hoc network, the communication links are unsteady due to the rapidly changing topology, high mobility and traffic density in the urban environment. Most of the existing geographical routing protocols rely on the continuous transmission of beacon messages to update the neighbors' presence, leading to network congestion. Source-based approaches have been proven to be inefficient in the inherently unstable network. To this end, we propose an opportunistic beaconless packet forwarding approach based on a modified handshake mechanism for the urban vehicular environment. The protocol acts differently between intersections and at the intersection to find the next forwarder node toward the destination. The modified handshake mechanism contains link quality, forward progress and directional greedy metrics to determine the best relay node in the network. After designing the protocol, we compared its performance with existing routing protocols. The simulation results show the superior performance of the proposed protocol in terms of packet delay and data delivery ratio in realistic wireless channel conditions.

• Computers and Concrete
• /
• v.15 no.2
• /
• pp.167-181
• /
• 2015

"Mortar or concrete pneumatically projected at high velocity onto a surface" is called Shotcrete. Models that predict shotcrete design parameters (e.g. compressive strength, slump etc) from any mixing proportions of admixtures could save considerable experimentation time consumed during trial and error based procedures. Artificial Neural Network (ANN) has been widely used for similar purposes; however, such models have been rarely applied on shotcrete design. In this study 19 samples of shotcrete test panels with varying quantities of water, steel fibers and silica fume were used to determine their slump, cost and compressive strength at different ages. A number of 3-layer Back propagation Neural Network (BPNN) models of different network architectures were used to train the network using 15 samples, while 4 samples were randomly chosen to validate the model. The predicted compressive strength from linear regression lacked accuracy with $R^2$ value of 0.36. Whereas, outputs from 3-5-3 ANN architecture gave higher correlations of $R^2$ = 0.99, 0.95 and 0.98 for compressive strength, cost and slump parameters of the training data and corresponding $R^2$ values of 0.99, 0.99 and 0.90 for the validation dataset. Sensitivity analysis of output variables using ANN can unfold the nonlinear cause and effect relationship for otherwise obscure ANN model.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.154-160
• /
• 2003

Uncertain time delay happens when the process reads the sensor data and sends the control input to the plant located at a remote site in distributed control system. As in the case of data network using TCP/IP, VDN that integrates both device network and data network has uncertain time delay. Uncertain time delay can cause degradation in performance and stability of distributed control system based on VDN. This paper first investigates the transmission characteristic of VDN and suggests a control scheme based on the Smith's predictor to minimize the effect of uncertain varying time delay. The validity of the proposed control scheme is demonstrated with real-time velocity control of DC servo motor located in remote site.