• Journal of Korea Multimedia Society
• /
• v.8 no.1
• /
• pp.71-78
• /
• 2005

When a PDA is used as a mobile terminal in an infrastructure network based on 802.11b standard wireless LAN, we measured and evaluated the performance of multimedia data transmission. In general, PDAs are mainly used tot receiving bulk data like multimedia data. However, while a PDA as a mobile host transfers multimedia data to a desktop PC as a fixed host in such a network, the time taken to receive data from the PC to the PDA is always longer than the time taken to send data from the PDA to the PC by at least 53%. Thus, we consider some critical factors that affect the time taken to receive Our experimental results show that with the PDA the time taken to access a file for writing is longer than the time taken to access a file for reading of to 4.11 times. In addition, a dramatic change of the site of the receiver window, from 686 bytes to 32,383 bytes, prolongs the time taken to receive. To transfer data without any inter-packet interval for the PDA and to increase the size of the TCP receive buffer will be effective in improving the delay to receive data.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.10
• /
• pp.1-9
• /
• 2001

The MAC (Medium Access Control) protocol is needed for the OLT(Optical Line Termination) to allocate bandwidth to ONUs(Optical Network Units) and ONTs(Optical Network Terminations) dynamically in the ATM PON(Passive Optical Network). With the protocol, the OLT gathers ONUs' informations and provides grants efficiently to each ONU. Two important functions of the MAC protocol is the grant request procedure and the grant distribution algrithm. The latter has the greatest arithmetic portion in the TC(Transmission Convergence) module, occupies a relatively large portion of the overall chip area, has often been the limiting factor in terms of speed, and should be designed to guarantee the quality of service for various traffics. In this paper, we implement the MAC with the FPGA which can allocate grants dynamically according to the queue length information and the number of active ONUs and distribute grants uniformly to minimize the cell delay variation for each ONU. The structure of the MAC scheduler for the dynamic bandwidth assignment has a programmable look-up table. Also, it has a simple structure, the less chip area, and the lower delay time.

• Current Optics and Photonics
• /
• v.1 no.5
• /
• pp.456-467
• /
• 2017

The benefits of network coding in all-optical multicast networks have been widely demonstrated. In this paper, we mainly discuss the multicast service efficiently provisioning problem in the network coding enabled elastic optical networks (EONs). Although most research on routing and spectrum allocation (RSA) has been widely studied in the elastic optical networks (EONs), rare research studies RSA for multicast in the network coding enabled EON, especially considering the time delay constraint. We propose an efficient heuristic algorithm, called Network Coding based Multicast Capable-Multipath Routing and Spectrum Allocation (NCMC-MRSA) to solve the multipath RSA for multicast services in the network coding enabled EON. The well-known layered graph approach is utilized for NCMC-MRSA, and two request ordering strategies are utilized for multiple multicast requests. From the simulation results, we observe that the proposed algorithm NCMC-MRSA performs more efficient spectrum utilization compared with the benchmark algorithms. NCMC-MRSA utilizing the spectrum request balancing (SRB) ordering strategy shows the most efficient spectrum utilization performance among other algorithms in most test networks. Note that we also observe that the efficiency of NCMC-MRSA shows more obvious than the benchmark algorithm in large networks. We also conduct the performance comparisons of two request ordering strategies for NCMC-MRSA. Besides, we also evaluate the impact of the number of the linkdisjoint parallel w paths on the spectrum utilization performance of the proposed algorithm NCMC-MRSA. It is interesting to find that the change of the parameter w in a certain range has a significant impact on the performance of NCMC-MRSA. As the parameter w increases to a certain value, the performances of NCMC-MRSA cannot be affected by the change of w any more.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1159-1166
• /
• 2014

In this paper, a resource management scheme for enhancing the network connectivity and reliability in wireless USB system is proposed. Wireless USB protocol is suitable for the application that supports the real-time multimedia service in Ship Area Network since it supports high speed data transfer. However, the device's mobility is caused the dramatic change of link state and network topology, and is occurred the degradation of network performance. Therefore, a resource management scheme for wireless USB system is proposed in this paper. The proposed technique can intelligently treat the change of link state, and solve the degradation of network performance. The simulation results show that proposed protocol can enhance the throughput and delay performance by selecting relay device with better link state.

• Journal of the Korea Society for Simulation
• /
• v.19 no.3
• /
• pp.1-6
• /
• 2010

Simulation analysis may be the essential means to either evaluate performance of systems or optimize system parameters for new design. Including many variations for design and implementation, MANET (Mobile Ad-hoc NETwork) is one target area of such an analysis. Since every node, however, included in the network has mobility, one MANET could be overlapped or merged with another one which use a different transport protocol. In order to communicate among nodes in this case, the new merged network should configure paths and addresses in advance. Configuring paths and addresses generates much overheads which ultimately cause delay in communicating data. Performance analysis is required to improve the data transport performance by minimizing overheads. This paper proposes a sound address auto-configuration method which is based on an on-demand manner and then presents modeling and performance analysis of the method. NS-2 simulation results verify that the proposed method can not only alleviate overheads, which are inevitably generated for address auto-configuration processes, and but also decentralize them in time.

• Journal of Information Processing Systems
• /
• v.13 no.3
• /
• pp.618-629
• /
• 2017

Mobile nodes can't always connect each other in DTNs (delay tolerant networks). Many DTN routing protocols that favor the "multi-hop forwarding" are proposed to solve these network problems. But they also lead to intolerant delivery cost so that designing a overhead-efficient routing protocol which is able to perform well in delivery ratio with lower delivery cost at the same time is valuable. Therefore, we utilize the small-world property and propose a new delivery metric called multi-probability to design our relay node selection principles that nodes with lower delivery predictability can also be selected to be the relay nodes if one of their history nodes has higher delivery predictability. So, we can find more potential relay nodes to reduce the forwarding overhead of successfully delivered messages through our proposed algorithm called HESnW. We also apply our new messages copies allocation scheme to optimize the routing performance. Comparing to existing routing algorithms, simulation results show that HESnW can reduce the delivery cost while it can also obtain a rather high delivery ratio.

• Journal of Information Technology Services
• /
• v.10 no.3
• /
• pp.237-250
• /
• 2011

Recently, Wireless Sensor Networks (WSN) require energy performance and guaranteed delivery delay time, contrarily with previous MAC protocols that aim to high throughput mostly. In order to satisfy the new significant requirements, many MAC protocols of WSN employ and try to enhance the duty cycle mechanism which is energy efficient technique in MAC layer. This duty cycle mechanism is oriented by toggling the transceiver conditions composed of wakeup and sleep states. The synchronous MAC protocols perform the period synchronization process. Hence, these are energy efficient in periodic monitoring environment, but are inefficient in where an event is incurred rarely and infrequently. Otherwise, the performance of asynchronous MAC protocols are contrarily with synchronous protocols. In this paper, we design two models consisting Always-busy and Always-idle ti simplify the general network congestion conditions. Through these models, moreover, we analyze two types MAC protocols in terms of energy efficiency and delay performance by analytical results. Additionally, we also evaluate two MAC protocols with two gongestion models that we designed. By the analytical and simulated results, we provide the general and efficient decision method in which protocols are more appropriate in a certain WSN environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.12
• /
• pp.5712-5728
• /
• 2017

Recently, there are many studies, that considering green wireless cellular networks, have taken the energy consumption of the base station (BS) into consideration. In this work, we first introduce an energy consumption model of multi-mode sharing BS powered by multiple energy sources including renewable energy, local storage and power grid. Then communication load requests of the BS are transformed to energy demand queues, and battery energy level and worst-case delay constraints are considered into the virtual queue to ensure the network QoS when our objective is to minimize the long term electricity cost of BSs. Lyapunov optimization method is applied to work out the optimization objective without knowing the future information of the communication load, real-time electricity market price and renewable energy availability. Finally, linear programming is used, and the corresponding energy efficient scheduling policy is obtained. The performance analysis of our proposed online algorithm based on real-world traces demonstrates that it can greatly reduce one day's electricity cost of individual BS.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.1
• /
• pp.66-71
• /
• 2009

In view of mutual complementary feature of wide coverage and high data rate, the interworking between 3G cellular network and WLAN is a global trend of wireless communications. This paper introduces the analytic result of an authentication mechanism for 3GPP-WLAN seamless mobility under the USIM-based authentication test-bed. In a handover process between heterogeneous networks, authentication is the main factor of handover delay. So authentication processing time should be firstly reduced. This paper describes an USTM-based EAP-AKA test-bed implemented for handover in UMTS and WLAN interworking systems. Experimental result has shown that the fast re-authentication mechanism during handover has reduced the handover delay by about 48.6%.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.74.2-74.2
• /
• 2016

It is important to know how well observation errors are removed in the calibration process prior to ensuing scientific research. In mm-VLBI observations, a radio wave suffers from an atmospheric propagation delay due to the rapid change of atmospheric refraction. It makes phases of VLBI correlation output fluctuate rapidly, which essentially decreases the coherence of phases and reduces the integration time. Consequently, it is challenging to achieve a high signal-to-noise ratio and enhance the quality of scientific output. Among the causes of the atmospheric propagation delay, water vapor in the troposphere is the most decisive factor to affect phase errors in the high frequency range (> 10GHz). It is expected to have the non-dispersive characteristic that enables to introduce new calibration strategy, Frequency Phase Transfer (FPT). This new method utilizes low frequency phases to compensate phase errors in high frequency bands. In addition, Korean VLBI Network (KVN) which benefits from the simultaneous 4-channels (22/43/86/129 GHz) observations is ideal to probe FPT performance. In order to evaluate FPT performance of KVN, we present the results of FPT phase analysis and discuss its performance.