• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.17-26
• /
• 2016

This work proposes a 12b 60MS/s 0.18um CMOS Flash-SAR ADC for various systems such as wireless communications and portable video processing systems. The proposed Flash-SAR ADC alleviates the weakness of a conventional SAR ADC that the operation speed proportionally increases with a resolution by deciding upper 4bits first with a high-speed flash ADC before deciding lower 9bits with a low-power SAR ADC. The proposed ADC removes a sampling-time mismatch by using the C-R DAC in the SAR ADC as the combined sampling network instead of a T/H circuit which restricts a high speed operation. An interpolation technique implemented in the flash ADC halves the required number of pre-amplifiers, while a switched-bias power reduction scheme minimizes the power consumption of the flash ADC during the SAR operation. The TSPC based D-flip flop in the SAR logic for high-speed operation reduces the propagation delay by 55% and the required number of transistors by half compared to the conventional static D-flip flop. The prototype ADC in a 0.18um CMOS demonstrates a measured DNL and INL within 1.33LSB and 1.90LSB, with a maximum SNDR and SFDR of 58.27dB and 69.29dB at 60MS/s, respectively. The ADC occupies an active die area of $0.54mm^2$ and consumes 5.4mW at a 1.8V supply.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.843-850
• /
• 2004

As mobile devices prevail, requests for various services using mobile devices have increased. Requests for application services that require large data space such as multimedia, game and database [1] specifically have greatly increased. However, mobile appliances have difficulty in applying various services like a wire environment, because the storage capacity of one is not enough. Therefore, research (5) which provides remote storage service for mobile appliances using iSCSI is being conducted to overcome storage space limitations in mobile appliances. But, when iSCSI is applied to mobile appliances, iSCSI I/O performance drops rapidly if a iSCSI client moves from the server to a far away position. In the case of write operation, $28\%$ reduction of I/O performance occurred when the latency of network is 64ms. This is because the iSCSI has a structural quality that is very .sensitive to delay time. In this paper, we will introduce an intermediate target server and localize iSCSI target to improve the shortcomings of iSCSI performance dropping sharply as latency increases when mobile appliances recede from a storage server.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.3
• /
• pp.165-173
• /
• 2015

This paper presents numerical results of static structural stability analysis in development of a vertical transfer device of a PRT(Personal Rapid Transit) vehicle. The vertical transfer of a fully occupied vehicle operating on a road network is the first attempt, which is expected to contribute to overcome the limitations of conventional 2-dimensional operation mode. In particular, the vertical transfer apparatus designed based on vertical circulating conveyors is capable of continuous transfer without time delay so that it enables to accommodate a high traffic density. This system has been frequently used in a logistics field; however, it is essential to assess a structural integrity because an external force by a vehicle weight is exerted on the conveyors in the form of a concentrated load unlike a conventional logistic transport. In this study, prior to the production process, the structural performance of the pilot design in an early stage is numerically evaluated using the commercial finite element method (FEM) solver (i.e., $Ansys^{(R)}$).

• Journal of Internet Computing and Services
• /
• v.15 no.1
• /
• pp.179-191
• /
• 2014

In this paper, a frame transmission method to make IEEE 802.15.4 nodes run at a new channel and its characteristics are studied when they experience difficulties in transmission of frames due to WiFi traffic. The researches on evaluating the interference from WiFi traffic, searching for a new channel with little interference or not, and changing the operating channel are analyzed. In an wireless channel overlapped with IEEE 802.11 network, the transmission delay of IEEE 802.15.4 frames, the collision of frames in sending IEEE 802.15.4 frames without applying CSMA-CA algorithm, and the operation of IEEE 802.11 nodes are explained. A transmission method of frames including frame-formated code blocks in order to use the rest part of collided IEEE 802.15.4 frame is proposed. In the experiments of the proposed method, it is observed that frame-formated code blocks are synchronized and received by receivers in case of collision, and then the collided positions in IEEE 802.15.4 frame and the characteristics of frame reception rate are analyzed. The experimental results show that the performance of the proposed method is improved in comparison to an existing method when we measure the time taken to send a channel change command and get the response in order to avoid the interference from WiFi traffic.

• The KIPS Transactions:PartC
• /
• v.11C no.7 s.96
• /
• pp.889-894
• /
• 2004

Most ad-hoc routing protocols such as AODV(Ad Hoc On-Demand Distance Vector) and DSR(Dynamic Source Routing) do not try to search for new routes if the network topology does not change. Hence, with low node mobility, traffic may be concentrated on several nodes, which results in long end-to-end delay due to congestion at the nodes. Furthermore, since some specific nodes are continuously used for long duration, their battery power may be rapidly exhausted. Expiration of nodes causes connections traversing the nodes to be disrupted and makes many routing requests be generated at the same time. Therefore, we propose a load balancing approach called Simple Load-balancing Approach (SLA), which resolves the traffic concentration problem by allowing each node to drop RREQ (Route Request Packet) or to give up packet forwarding depending on its own traffic load. Meanwhile, mobile nodes nay deliberately give up forwarding packets to save their own energy. To make nodes volunteer in packet forwarding. we also suggest a payment scheme called Protocol-Independent Fairness Algorithm (PIEA) for packet forwarding. To evaluate the performance of SLA, we compare two cases where AODV employs SLA or not. Simulation results show that SLA can distribute traffic load well and improve performance of entire ad-hoc networks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6604-6610
• /
• 2015

In this paper, an efficient Wireless Access in Vehicular Environment (WAVE) packet transmission scheme for railroad communication is proposed. WAVE communication is a wireless local area network (WLAN) based communication and it is developed to be suitable for vehicular communication. There has been a lot of study on WAVE's applicability to Intelligent Transport System (ITS). As one of main transportation methods, by using WAVE, quality of railroad communication including WLAN based Communication Based Train Control (CBTC) can be enhanced and variety of railroad communication systems can be integrated into WAVE. However, there are technical challenges to adopt WAVE in railroad communications. For the simplest single-PHY WAVE, time division alternation of 50ms between Control Channel (CCH) and Service Channel (SCH) is required. Since there are delay sensitive railroad traffic types, alternation operation of CCH and SCH may cause performance degradation. In this paper, after identifying a couple of problems based on detailed analysis, a novel packet transmission scheme under railroad environment is proposed. In order to verify if the proposed scheme meets the requirement of railroad communication, WAVE transmission is mathematically modeled.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.6
• /
• pp.1124-1131
• /
• 2006

The recent medical treatment guidelines and the development of information technology make hospitals reduce the expense in surrounding environment and it requires improving the quality of medical treatment of the hospital. Moreover, MIS, PACS(Picture Archiving and Communication System), OCS, EMR are also developing. Medical Information System is evolved toward integration of medical IT and situation is changing with increasing high speed in the ICT convergence. Mobile component refers to construct wireless system of hospital which has constructed in existing environment. Through RFID development in existing system, anyone can log on easily to internet whenever and wherever. It is the core technology to implement automatic medical processing system. This paper provides a basic review of RFID model, PACS application component services. In addition, designed and implemented database server's component program and client program of mobile application that recognized RFID tag and patient data in the ubiquitous environments. This system implemented mobile PACS that performed patient data based db environments, and so reduced delay time of requisition, medical treatment, lab.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.7
• /
• pp.813-826
• /
• 1999

실시간 멀티미디어 응용의 등장으로 멀티캐스트와 QoS(Quality of Service) 지원이 필수적인 망 서비스로 부각되고 있다. 이에, ATM 기반의 인터넷에서 IP 멀티캐스트의 효율적인 처리를 위하여 MARS(Multicast Address Resolution Server)가 제안되었고, 기존의 최선 서비스 기반의 인터넷에서 QoS(Quality of Service)를 지원하기 위하여 RSVP(Resource Reservation Protocol)가 제안되었다. 본 논문에서는 ATM 망에서 QoS가 지원되는 IP 멀티캐스트 서비스를 제공하기 위하여 MARS 구조에서 RSVP를 지원하는 두 가지 방안을 제안하고, 시뮬레이션을 통하여 그 성능을 분석하였다. 제안하는 두 가지 방법은 각각 'RSVP 전 홉 노드 방식'과 'MARS 서버 방식'이라 명명하였다. RSVP 전 홉 노드 방식은 송신원으로부터 ATM 망으로 진입하는 노드와 수신원을 향하여 ATM 망을 진출하는 노드 간에 각각 일대일 양방향 VC를 설정하여 멀티캐스트 그룹에 속하는 수신원들이 보내는 자원 예약 메시지를 ATM 망에서 전송하는 방안이다. MARS 서버 방식은 ATM 망을 진출하는 노드와 MARS 서버간에 MARS 제어 메시지 교환을 위해 존재하는 ATM VC를 사용하여 RSVP의 자원 예약 메시지를 전송하고, MARS 서버가 RSVP 자원 예약 메시지를 처리하도록 그 기능을 확장함으로써 ATM 망에서 필요로 하는 제어 VC 수를 절약할 수 있는 방안이다. 시뮬레이션을 통하여, MARS 서버 방식은 ATM 제어 VC의 수를 절약할 수 있을 뿐 아니라 경우에 따라 RSVP 자원 예약 메시지 전달 지연을 줄일 수도 있음을 볼 수 있었다. 그러나, MARS 클러스터 내에 동시에 존재하는 RSVP 흐름이 많을 때에는 MARS 서버 방식의 경우 MARS 서버에서의 병목 현상으로 인해 성능이 저하될 수 있다.Abstract Emerging real time multimedia applications require multicast service with a QoS(Quality of Service) support. An overlay service architecture MARS(Multicast Address Resolution Server) is proposed to support IP multicast over an ATM network, and a resource reservation protocol RSVP is proposed to provide QoS support in the Internet which is originally based upon best effort service only. In this paper, we propose two schemes to support IP multicast service with QoS support over ATM networks: 'RSVP Previous Hop Node(RPHN) scheme' and 'MARS server based scheme'. In RPHN scheme, the RSVP reservation messages are transported via one-to-one ATM control VC from the egress nodes to the ingress nodes of the the multicast flow set up between each pair of nodes. The RSVP message processing occurs at the ingress nodes of the multicast flow. Whereas, in the MARS server based scheme, the RSVP reservation messages are transported via the MARS control VCs between the egress nodes and the MARS server. The RSVP message processing burden is imposed at MARS server in this scheme. For MARS server based scheme, no additional ATM VC is required for RSVP reservation message transmission, while the processing burden at the MARS server is high. Simulation results show that the MARS server based scheme, may accomplish RSVP reservation message delivery with smaller delay as well as saving of the number of ATM VCs. When the number of simultaneous RSVP flows in the MARS cluster is large, however, MARS based scheme may suffer performance degradation since MARS server becomes a performance bottleneck.

• Journal of Convergence for Information Technology
• /
• v.7 no.2
• /
• pp.43-51
• /
• 2017

Background/Objectives : The purpose of this study is to propose a multi-threaded web crawl using queues that can solve the problem of time delay of single processing method, cost increase of parallel processing method, and waste of manpower by utilizing multiple bots connected by wide area network Design and implement. Methods/Statistical analysis : This study designs and analyzes applications that run on independent systems based on multi-threaded system configuration using queues. Findings : We propose a multi-threaded web crawler design using queues. In addition, the throughput of web documents can be analyzed by dividing by client and thread according to the formula, and the efficiency and the number of optimal clients can be confirmed by checking efficiency of each thread. The proposed system is based on distributed processing. Clients in each independent environment provide fast and reliable web documents using queues and threads. Application/Improvements : There is a need for a system that quickly and efficiently navigates and collects various web sites by applying queues and multiple threads to a general purpose web crawler, rather than a web crawler design that targets a particular site.

• Journal of radiological science and technology
• /
• v.28 no.4
• /
• pp.317-325
• /
• 2005

The recent medical treatment guidelines and the development of information technology make hospitals reduce the expense in surrounding environment and it requires improving the quality of medical treatment of the hospital. That is, with the new guidelines and technology, hospital business escapes simple fee calculation and insurance claim center. Moreover, MIS(Medical Information System), PACS(Picture Archiving and Communications System), OCS(Order Communicating System), EMR(Electronic Medical Record), DSS(Decision Support System) are also developing. Medical Information System is evolved toward integration of medical IT and situation si changing with increasing high speed in the ICT convergence. These changes and development of ubiquitous environment require fundamental change of medical information system. Mobile medical information system refers to construct wireless system of hospital which has constructed in existing environment. Through RFID development in existing system, anyone can log on easily to Internet whenever and wherever. RFID is one of the technologies for Automatic Identification and Data Capture(AIDC). It is the core technology to implement Automatic processing system. This paper provides a comprehensive basic review of RFID model in Korea and suggests the evolution direction for further advanced RFID application services. In addition, designed and implemented DB server's agent program and Client program of Mobile application that recognized RFID tag and patient data in the ubiquitous environments. This system implemented medical information system that performed patient data based EMR, HIS, PACS DB environments, and so reduced delay time of requisition, medical treatment, lab.