• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.135-138
• /
• 2002

본 논문은 반향경로의 순지연 시간 추정 및 보상을 이용한 네트워크 반향 제거기의 실시간 구현에 관한 연구이다. VoIP 게이트웨이와 연결된 복잡한 교환기망(PSTN)에서 발생되는 건 반향은 통화품질의 저하를 초래한다. 긴 순지연 시간을 포함하는 반향을 실시간 구현에 적합한 연산량으로 제거하기 위해, 간축 영역에서 반향 경로를 추정하여 순지연 시간을 추정후 보상하는 반향제거기를 구현하였다. 순지연 시간의 안정적인 추정을 위해 문턱치 보다 큰 유효 계수를 이용하여 순지연 시간을 추정하는 기법을 제안하였으며, 실시간 구현시 순간 최대 연산량을 줄이기 위해 추정된 반향 경로를 분할하여 순지연 시간을 추정하는 기법을 제안하였다. 제안된 시스템을 Texas Instruments사의 16비트 고정소수점 DSP TMS320C5409를 사용하여 구현하였고, 시뮬레이터를 통하여 성능을 검증하였다.

• Journal of Internet Computing and Services
• /
• v.15 no.2
• /
• pp.1-7
• /
• 2014

This paper presents an analytical method for finding the optimum transmission range in mobile ad hoc networks(MANETs). The results are particularly useful for the operation of military networks, as the transmission range affects the throughput, delay, and battery consumption. Plus, the proposed method allows the optimum transmission range to be determined in advance when deploying combatants with mobile terminals. And we analyze the battery life-time and the optimum transmission range under various propagation scenarios based on Hata propagation model. The proposed method obtains the optimum transmission range in a MANET based on the operational conditions.

• Annual Conference of KIPS
• /
• 2014.04a
• /
• pp.190-191
• /
• 2014

Out-of-Order Packet ($O^3P$) problem is an issue that significantly impacts to the QoS of service and network. Route optimization (RO) in PMIPv6 is proposed by P.Loureiro and M. Liebsch to reduce the load of LMAs and transmission delay. In RO scheme, at the time the optimal path is established, there exist two paths: optimal path and old path as non-optimal path for transmitting data between MN1 and MN2 that is the cause of $O^3P$ occurring. This paper proposes a scheme to prevent $O^3P$ problem by using packet buffering technique and a new mobility message, named End Traffic Marker (ETM) to mark the end of packet delivery through the old path.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.3
• /
• pp.143-148
• /
• 2002

Congestion may take place in the ATM network because of high-speed cell transmission features, and cell delay and loss also can be caused by unexpected traffic variation. Thus, traffic control mechanisms are needed. One of them to decrease congestion is the Cell shaping. This paper proposes a hybrid type cell shaper composed of a Leaky Bucket with token pool, Tn with time window, and a spacing control buffer. The simulator BONeS with the ON/OFF traffic source model evaluates the performance of the proposed cell shaping method. Simulation results show that the cell shaping concerning the respective source traffics is adapted to and then controlled on the mean bit rate.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.5
• /
• pp.1484-1502
• /
• 2023

The medical sector actively changes and implements innovative features in response to technical development and revolutions. Many of the most crucial elements in IoT-connected health services are safeguarding critical patient records from prospective attackers. As a result, BlockChain (BC) is gaining traction in the business sector owing to its large implementations. As a result, BC can efficiently handle everyday life activities as a distributed and decentralized technology. Compared to other industries, the medical sector is one of the most prominent areas where the BC network might be valuable. It generates a wide range of possibilities and probabilities in existing medical institutions. So, throughout this study, we address BC technology's widespread application and influence in modern medical systems, focusing on the critical requirements for such systems, such as trustworthiness, security, and safety. Furthermore, we built the shared ledger for blockchain-based healthcare providers for patient information, contractual between several other parties. The study's findings demonstrate the usefulness of BC technology in IoHT for keeping patient health data. The BDSA-IoHT eliminates 2.01 seconds of service delay and 1.9 seconds of processing time, enhancing efficiency by nearly 30%.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.131-144
• /
• 1997

Traffic jam densified day by day is phenomenon to occur lack of the road capacity in comparison with traffic density, but lack of the road cannot be concluded by main cause of traffic ism. Because the central function of a city would be concentrated upon the downtown and traffic demand would not be evenly distributed by the classification of an hour. Therefore, this study based on the fact that each driver will select the route generating traffic delay very low when path choice from origin to destination in travel plan estimating the quality of passage could be maintained the speed he want will approach to a characteristic grasp of a road, traffic, driver changing every moment by traffic-demand of road increased as a geometrical series with analysis a classification of a street, a intersection along the path on traffic density and highway capacity analysis the path using GIS techniques about complex street network, also will get the path of actual optimum for traffic delay trend creating under various condition the classification per a hour, a day of week and an incident through network such as analysis for traffic generation zone adjacent about street, intersection, afterward will expect the result increasing efficiency of the road-use through a good distribution of traffic by optimum-path choice, accordingly will prepare the scientific, objective, appropriate basis to decide the reasonable time of a road-widen and expansion through section analysis along a rate of traffic volume vs. road capacity.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.9-21
• /
• 2016

Nowadays various methods for energy saving have been studied in IP networks. This paper suggests a 2-phase OSPF routing method for energy saving on IP networks having various energy profiles and analyzes its characteristics. The phase-1 of the routing is an OSPF routing method considering the energy cost of devices besides existing metrics to minimize energy consumption. In the phase-2 of the routing, it makes core nodes go into sleep sate for energy saving and reroutes the paths affected by sleeping core nodes. At this time, we confirm that the characteristics of mean delay and energy efficiency can be satisfied by limiting an allowable hop number in the reroute paths, and utilization rate of nodes and links for assuring energy saving and network-level QoS. Since the efficiency of energy saving and delay characteristics differ according to selection methods of core nodes to go into sleep state, it is that the a method of core node selection based on MP(minimum_path) is more excellent than others in terms of network-level QoS and energy saving in IP networks.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.259-266
• /
• 2013

Since the wireless communications have a limited transmission, the devices just around a master node can exchange data. Though Bluetooth and Zigbee support ad hoc, they are not appropriate for real-time voice communications. In this paper, we present a TDMA-based relay protocol for several users to communicate simultaneously. The proposed protocol can relay data or voice to other nodes in real-time by the multi-hop transmission method using TDMA. And the proposed protocol improves the network performance by allocating different frequencies to the slaves depending on the routing path scheduled by the routing table. NS-2 simulation shows that the performance of the proposed protocol is good in terms of the transmission delay and pecket loss probability in the real-time voice transmission.

• Journal of KIISE:Software and Applications
• /
• v.26 no.12
• /
• pp.1404-1417
• /
• 1999

웹과 같은 분산 환경에서는, 웹 브라우저 상에서 SQL 형식의 공간 질의를 수행시키는 것과 또한 서버로부터 그 질의 결과를 보는 것이 가능하다. 그러나, 격자 이미지(raster image)와 같은 대용량 공간 데이타를 포함하는 질의 결과를 웹 브라우징할 때 발생하는 많은 문제점들 중에서, 사용자 응답 시간의 지연은 매우 중요한 문제이다. 본 논문에서는 사용자의 재요청(callback) 접근 패턴이 공간적 근접성(spatial locality)을 따른다는 가정하에서의, 사용자 응답 시간을 최소화하기 위한 새로운 프리페치(prefetch) 전략에 대해서 서술한다. 본 논문의 프리페치 전략은 다음과 같이 요약될 수 있다. 첫째, 프리페치 알고리즘은 사용자의 접근 패턴을 잘 반영하는 힐버트 곡선(Hilbert-curve) 모델을 바탕으로 한다. 둘째, 프리페치 전송 비용을 줄이기 위해서 사용자의 재요청 시간 간격(think time)을 이용한다. 본 논문에서는, 힐버트 곡선을 이용한 프리페치 전략의 성능 평가를 위해서 다양한 실험을 하였으며, 그 결과로 프리페치를 하지 않는 방식보다 높은 성능 향상이 있음을 보인다.Abstract In distributed environment(e.g., WWW), it would be possible for the users to submit SQL-like spatial queries and to see their query results from the server on the Web browser. However, of many obstacles which result from browsing query results including large spatial data such as raster image, the delay of user response time is very critical. In this paper we present a new prefetch policy which can alleviate user response time on the assumption that user's callback access pattern has spatial locality. Our prefetch policy can be summerized as follows: 1) our prefetch algorithm is based on the Hibert-curve model which well replects user's access pattern, and 2) it utilizes user's callback interval to reduce prefetch network transmission cost. In this paper we conducted diverse experiments to show that our prefetch policy achieves higher performance improvement compared to other non-prefetch methods.

• Journal of Digital Contents Society
• /
• v.16 no.2
• /
• pp.189-196
• /
• 2015

The proposed cooperative 3D modelling system enables more efficient modeling works by improving current cooperation systems. Current 3D modeling tasks work on off-line and most of works are cooperation systems which communicate by files. These cooperation system cannot be interactive, occurs time delay while feedback and must have some programs which can read the files. This paper solves these problems using web that has the characteristics of network and proposes new cooperation system form. Using WebGL(Web Graphics Library) which is proposing technology in technical realization of Web 3D modeling, we make 3D objects in web browser and these objects can be manipulated by server-client communication. Therefore, if people use this system, they can use real time interaction and feedback. Also this system lowers a software installation necessity and can access everytime if web browser is installed.