• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.6
• /
• pp.567-575
• /
• 2017

It is not cost effective to raise the density of catch basins in preparation for heavy rainfall in terms of construction and maintenance. Our researchers have developed the new catch basin for increasing interception capacity of runoff with internal filtration structure. To compare interception capacity of an existing catch basin with the invented catch basin, a hydraulic experiment device with 4% of road gradients and 0.2% of road gradients was constructed. For runoff conditions of 4.4 l/s, 6.7 l/s and 10.4 l/s, capability of runoff and separation capability of debris (sand and leaves) were evaluated. As the main experimental results, the effectiveness of the developed catch basin has been verified with an increase in interception rate of approximately 22% for the runoff of 6.7 l/s as heavy rainfall. However, the results of invented catch basin showed only 4.5% of settlement rate of debris regarding sand. Therefore, the authors proposed an improved tilted screen structure additionally. After reviewing the performance of improved catch basin, application of the invented catch basin is expected to drain runoff effectively when it is applied to the faulty road drainage section.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1288-1296
• /
• 2006

This paper proposes a fast authentication scheme based on hierarchical key structure (HiFA) for roaming mobile nodes in both intra-domain and inter-domain. The full authentication procedure standardized in IEEE 802.11 and 802.16 is difficult to be applied to a handover since it needs a heavy operation and long delay time during a handover. Though a number of schemes were proposed to solve the problem, the existing schemes might degrade the security of authentication or impose heavy administrative burden on the Pome authentication server. The main contribution of this paper is to reduce the communication and computation overhead of the home authentication sewer without degrading the security strength of the fast roaming authentication using hierarchical authentication key structure. The proposed scheme iii this paper decentralizes the administrative burden of the home authentication server to other network entities such as a local authentication server or access point and supports the security separation of the authentication key among local authentication servers using hash key chain.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.267-274
• /
• 2005

This paper presents the fabrication of surface acoustic wave (SAW)-based pressure sensor for long-term stable mechanical compression force measurement. SAW pressure sensor has many attractive features for practical pressure measurement: no battery requirement, wireless pressure detection especially at hazardous environments, and easy other functionality integrations such as temperature, humidity, and RFID. A $41^{\circ}$ YX $LiNbO_3$ piezoelectric substrate was used because of its high SAW propagation velocity and large values of electromechanical coupling factors $K^2$. A silicon substrate with $\~200{\mu}m$ deep cavity was bonded to the diaphragm with epoxy, in which gold was covered all over the inner cavity in order to confine electromagnetic energy inside the sensor, and provide good isolation of the device from its environment. The reflection coefficient $S_{11}$ was measured using network analyzer. High S/N ratio, sharp reflected peaks, and clear separation between the peaks were observed. As a mechanical compression force was applied to the diaphragm from top with extremely sharp object, the diaphragm was bended, resulting in the phase shifts of the reflected peaks. The phase shifts were modulated depending on the amount of applied mechanical compression force. The measured $S_{11}$ results showed a good agreement with simulated results obtained from equivalent admittance circuit modeling.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.2 s.34
• /
• pp.49-57
• /
• 2005

In this paper. a CLB-based CPLD low power technology mapping algorithm for trade-off is proposed. To perform low power technology mapping for CPLD, a given Boolean network has to be represented to DAG. The proposed algorithm consists of three step. In the first step, TD(Transition Density) calculation have to be Performed. Total power consumption is obtained by calculating switching activity of each nodes in a DAG. In the second step, the feasible clusters are generated by considering the following conditions : the number of output. the number of input and the number of OR-terms for CLB within a CPLD. The common node cluster merging method, the node separation method, and the node duplication method are used to produce the feasible clusters. The proposed algorithm is examined by using benchmarks in SIS. In the case that the number of OR-terms is 5, the experiments results show reduction in the power consumption by 30.73$\%$ comparing with that of TEMPLA, and 17.11$\%$ comparing with that of PLAmap respectively

• Korean Journal of Social Welfare
• /
• v.46
• /
• pp.145-177
• /
• 2001

This paper seeks to analyze how the welfare state has developed both in the Kim Young Sam government and in the Kim Dae Jung government. Among other things, the two governments share some similarities: compared to the previous authoritarian governments, both of them enjoyed a high level of democratic legitimacy; the two were under pressure to win the elections to acquire and remain in power; and finally, the two tried to strengthen welfare system. But there exist more critical differences. The Kim Dae Jung government was a minority government, while the Kim Young Sam government was a majority one. Compared to the latter one, the former came to power in an extremely bad economic condition. Fortunately, however, the Kim Dae Jung government was able to enjoy a relatively high level of state autonomy resulting from an exceptional situation of foreign currency crisis. In addition, it was more reformist in policy orientation and had a more open cooperative network with civil society. All these differences added up to produce remarkable differences with regard to the improvement in welfare development. Especially, it is noted that the Kim Dae Jung government was very successful in several respects: provision of national minimum, integration of national medical insurance, development of productive welfare system, and final1y increase in welfare spending. Recently, criticisms from the opposition party, the press, and middle and upper class people mount against the Kim Dae Jung government which has made significant mistakes in instituting the separation of medical and pharmaceutical businesses. However, the important improvements in welfare institutions and programs by the Kim Dae Jung government need to be maintained to deal with all the negative effects of a naked market economy. They must also be sustained to keep alive democracy that Korean people have fought for nearly half a century.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.6-9
• /
• 2008

Analyzing the characteristics of blood flow in the blood vessels is very important to diagnose the circulatory diseases. In order to investigate the hemodynamic characteristics in vivo, the measurements of blood flows inside the extraembryonic arterial and venous blood vessels of chicken embryos were carried out using an in vivo micro-PIV technique. The circulatory diseases are closely related with the formation of abnormal hemodynamic shear stress regions, thereby it is important to get blood velocity and vessel's morphological information according to the vessel configuration and the flow conditions. In this study, the flow images of RBCs in blood vessels were obtained using a high-speed CMOS camera with a spatial resolution of approximately 14.6${\mu}$m${\times}$14.6${\mu}$m in the whole circulation network of blood vessels. The blood flows in the veins and arteries show steady laminar and unsteady pulsatile flow characteristics, respectively. The mean blood flows merged (in veins) and bifurcated (in arteries) smoothly into the main blood vessel and branches, respectively, without any flow separation or secondary flow which accompanying large variation of shear stress. Vorticity was high in the inner regions for both types of vessels, where the radius of curvature varied greatly. The instantaneous flows in the arterial blood vessels showed noticeable pulsatility due to the heart beat, and the main features of the velocity waveforms, including pulsatile shape, retrograde flow, mean velocity, maximum velocity and pulsatile frequency, were significantly dependent on the pulsatile condition which dominates the arterial blood flow. In near future, these in vivo experimental results of blood flow measured in various extraembryonic blood vessels would be very useful to understand the hemodynamic characteristics of human blood flows and various blood flow researches for clinically useful hemodynamic discoveries as well.

• The Journal of Society for e-Business Studies
• /
• v.22 no.4
• /
• pp.39-51
• /
• 2017

In October 2016, the NFSA (National Financial Supervisory Authorities) revised the network separation clause of the Regulation on Supervision of Electronic Financial Activities in order to promote the Cloud Computing implementation in the financial sectors. The new regulation, however, limits the Cloud Computing usage to non-critical information and its processing system. Financial institutions that provide customer data analysis and personalized services based on personal data regard current revision as unchanged as before. The implementation of Cloud Computing has greatly contributed to cost reduction, business innovation and is an essential requirement in ever-changing information communication technology environment. To guarantee both security and reliability of the implementation of the Cloud Computing in financial sectors, a considerable amount of research and debate needs to be done. This paper examines current Cloud Computing policies in the Korean financial sector and the challenges associated with it. Finally, the paper identifies policy suggestions based on both European Union and United States' approach as they have successfully introduced Cloud Computing Services for their financial sectors.

• Journal of Plant Biotechnology
• /
• v.37 no.2
• /
• pp.196-204
• /
• 2010

With the completion of genome sequencing of several organisms, attention has been focused to determine the function and functional network of proteins by proteome analysis. The recent techniques of proteomics have been advanced quickly so that the high-throughput and systematic analyses of cellular proteins are enabled in combination with bioinformatics tools. Furthermore, the development of proteomic techniques helps to elucidate the functions of proteins under stress or diseased condition, resulting in the discovery of biomarkers responsible for the biological stimuli. Ultimate goal of proteomics orients toward the entire proteome of life, subcellular localization, biochemical activities, and their regulation. Comprehensive analysis strategies of proteomics can be classified as three categories: (i) protein separation by 2-dimensional gel electrophoresis (2-DE) or liquid chromatography (LC), (ii) protein identification by either Edman sequencing or mass spectrometry (MS), and (iii) quanitation of proteome. Currently MS-based proteomics turns shiftly from qualitative proteome analysis by 2-DE or 2D-LC coupled with off-line matrix assisted laser desorption ionization (MALDI) and on-line electrospray ionization (ESI) MS, respectively, to quantitative proteome analysis. Some new techniques which include top-down mass spectrometry and tandem affinity purification have emerged. The in vitro quantitative proteomic techniques include differential gel electrophoresis with fluorescence dyes, protein-labeling tagging with isotope-coded affinity tag, and peptide-labeling tagging with isobaric tags for relative and absolute quantitation. In addition, stable isotope labeled amino acid can be in vivo labeled into live culture cells through metabolic incorporation. MS-based proteomics extends to detect the phosphopeptide mapping of biologically crucial protein known as one of post-translational modification. These complementary proteomic techniques contribute to not only the understanding of basic biological function but also the application to the applied sciences for industry.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.4
• /
• pp.619-627
• /
• 2015

This paper presents a speech enhancement method using non-negative matrix factorization (NMF). In the training phase, each basis matrix of source signal is obtained from a proper database, and these basis matrices are utilized for the source separation. In this case, the performance of speech enhancement relies heavily on the basis matrix. The proposed method for which speech basis matrix is made a high reconstruction error for noise signal shows a better performance than the standard NMF which basis matrix is trained independently. For comparison, we propose another method, and evaluate one of previous method. In the experiment result, the performance is evaluated by perceptual evaluation speech quality and signal to distortion ratio, and the proposed method outperformed the other methods.

• Plant Journal
• /
• v.12 no.3
• /
• pp.24-31
• /
• 2016

Wind-induced vibration is a phenomenon that a struture is oscillated due to wind force such as buffeting, vortex shedding wake and etc., which is one of important characteristics to be considered for design in case that stack has significant slenderness ratio or low natural frequency. International design standards of stack define several criteria for evaluating the suitability of stack design, which describe the required design considerations for each range of design parameters and provide the instruction to verify the stack design against wind-induced vibration simply. However, there is a limitation that they cannot provide quantitative information in case code requirement cannot be satisfied due to constraints of plant space or economical design. In order to overcome the limiation of code, integrated numerical analysis of computational fluid dynamics, harmonic analysis and finite element analysis were proposed to investigate wind-induced vibration for multiple stacks in actual plant. Simulated results of mutual wake interference effect between adjacent stacks were evaluated and compared to the criteria in international standards.