• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.151-154
• /
• 2003

In this paper, we described a method to guarantee a real-time communication in the hetegeneous network for the personal robot. The hetegeneous network is composed of many kinds of network like IEEE1394, Ethernet, CAN, Bluetooth, Wireless Lan and so on. real-time data is transfered via those kinds of network. Those network have different characteristics as speed, bandwidth, Priority. we used IEEE1394, Ethernet, CAN to study in this paper. To guarantee a real-time communication, a worst case response time must be scalable. In this environment to guarantee a real-time communication, we get a worst case response time of each network and a end-to-end worst case response time.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.10a
• /
• pp.157-161
• /
• 1996

This paper presents a method for designing private networks considering response time under packet switching network environment Specifically, we propose the designing process of a private network, where the host is assumed to be synchronous and the terminals to be asynchronous, according to protocol and access lines. To calculate the response time for the networks, we use the mutual independent M/M/1 and M/W/s queueing models. Comparing the response time derived from the model with the actual one, it is found that the model yields almost same performance in a more economic way. From the experiment, it is suggested that the necessary number of lines as well as the response time for a specific network can be estimated properly by sensitivity analysis.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.72-75
• /
• 2004

In this paper, the task assignment strategy considering communication delay and the priority of distributed tasks is proposed for the real-time network system in order to maximize the utilization of the system. For the task assignment strategy, the relationship among priority of tasks in network nodes, the calculation time of each task, and the end-to-end response time including the network delay is formulated firstly. Then, the task assignment strategy using the genetic algorithm is proposed to optimize the utilization of the system considering the LCM(Least Common Multiple) period. The effectiveness of proposed strategy is proven by the simulation for estimating the performance such as the utilization and the response time of the system in case of changing the number of tasks and the number of network nodes.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.48-55
• /
• 2005

In this paper, a mathematical model and a simulation method for the response time analysis of Local Interconnect Network(LIN) based network systems are proposed. Network-induced delays in a network based control system can vary widely according to the transmission time of message and the overhead time of transmission. Therefore, in order to design a distributed control system using LIN network, a method to predict and verify the timing behavior of LIN protocol is required at the network design phase. Furthermore, a simulation environment based on a timing model of LIN protocol is beneficial to predict the timing behavior of LIN. The model equation is formulated with six timing parameters deduced from timing properties of LIN specification. Additionally, LIN conformance test equations to verify LIN device driver are derived with timing constraints of the parameters. The proposed model equation and simulation method are validated with a result that is measured at real LIN based network system.

• The Journal of the Korea Contents Association
• /
• v.5 no.3
• /
• pp.201-208
• /
• 2005

To guarantee the quality of service for user request, we should consider various kinds of things. The important thing of QoS is that response time of service is transparently suggested 'to network users. We can know the response time of service using the information of network latency, system latency, and software component latency, In this paper, we carried out the modeling of network latency and analyzed the effects of packets loss to the network latency, Also, we showed the effectiveness of modeling using the NS-2. This research can help to provide the effective methods in case of SLA(Service Level Agreement) agreement between service provider and user.

• Journal of Korean Society on Water Environment
• /
• v.27 no.5
• /
• pp.661-669
• /
• 2011

The purpose of this study is quantitative analysis of the effects of the interactions between stream network and hillslope to hydrologic response functions. To this end general formulation of hydrologic response function is performed based on width function and grid framework. Target basins are Ipyeong and Tanbu basins. From the results of width function estimation even similar sized and closely located basins could have very different hydrologic response function. It is found out that the interactions between stream network and hillslope are essential factors of rainfall-runoff processes because their difference can make the hydrologic response function with positive skewness. The change of velocities of stream network and hillslope might influence the magnitude of peak but time to peak tends to more sensitively respond to velocities of stream network. Lag time of basin would be the result of complex interaction between drainage structures and dynamic properties of river basin.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.7
• /
• pp.10-18
• /
• 1992

In this paper, a simulation model for scope and filter parameters in CMIS/CMIP, OSI management protocol, has been discussed and the suitable scope type was represented by analyzing optimal polling time in network management system, queue size and response time. Scope and filter parameters in MGet, M-Set, M-Action, and =M-Delete services provide a scheme to select some managed objects, and the results are largely varied according to a scope type requested and the outcome of filtering. It has been simulated each scope type and all scope type mixed in a network by varying the offered load and a polling time. On the same time, the response time, queue size of the managing system and a delay time have been measured. As a results, the suitable scope type and polling time enhancing the network performance on the OSI network management is proposed.

• Structural Engineering and Mechanics
• /
• v.83 no.3
• /
• pp.401-413
• /
• 2022

The collapse of civil infrastructure due to natural disasters results in financial losses and many casualties. In particular, the recent increase in earthquake activities has highlighted on the importance of assessing the seismic performance and predicting the seismic risk of a structure. However, the nonlinear behavior of a structure and the uncertainty in ground motion complicate the accurate seismic response prediction of a structure. Artificial intelligence can overcome these limitations to reasonably predict the nonlinear behavior of structures. In this study, a deep learning-based algorithm was developed to estimate the time-history seismic response of bridge structures. The proposed deep neural network was trained using structural and ground motion parameters. The performance of the seismic response prediction algorithm showed the similar phase and magnitude to those of the time-history analysis in a single-degree-of-freedom system that exhibits nonlinear behavior as a main structural element. Then, the proposed algorithm was expanded to predict the seismic response and fragility prediction of a bridge system. The proposed deep neural network reasonably predicted the nonlinear seismic behavior of piers and bearings for approximately 93% and 87% of the test dataset, respectively. The results of the study also demonstrated that the proposed algorithm can be utilized to assess the seismic fragility of bridge components and system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.119.3-119
• /
• 2001

When building a network-based real-time control system, a network-induced delay time should be surly considered for real time schedulability to be guaranteed. The network delay time on end-to-end communication has been analyzed theoretically and modeled mathematically from many previous works. There also exist any other delay element not considered before. In this paper, the remote feedback control system using the CAN protocol is proposed to control three axes´ manipulator arm and the application layer of CAN is modeled to analyze the delay elements defined by three types of time delay: Software delay time, Controller delay time, and Access delay time, in details. The analyzed results are used as an important component to determine PID gains of the proposed system. The effect of the delay time on the control performance is evaluated by com paring the response characteristics of the control system through simulation.

• International Journal of Computer Science & Network Security
• /
• v.23 no.7
• /
• pp.165-170
• /
• 2023

Scheduling algorithms plays a significant role in optimizing the CPU in operating system. Each scheduling algorithms schedules the processes in the ready queue with its own algorithm design and its properties. In this paper, the performance analysis of First come First serve scheduling, Non preemptive scheduling, Preemptive scheduling, Shortest Job scheduling and Round Robin algorithm has been discussed with an example and the results has been analyzed with the performance parameters such as minimum waiting time, minimum turnaround time and Response time.