• Tunnel and Underground Space
• /
• v.6 no.1
• /
• pp.30-38
• /
• 1996

A two dimensional analysis program for groundwater flow in fractured network was developed to analyze the influence of discontinuity characteristics on groundwater flow. This program involves the generation of discontinuities and also connectivity analysis. The discontinuities were generated by the probabilistic density function(P.D.F.) reflecting the characteristics of discontinuities. And the fracture network model was completed through the connectivity analysis. This program also involves the analysis of groundwater flow through the discontinuity network. The result of numerical experiment shows that the equivalent hydraulic conductivity increased and became closer to isotropic as the density and trace length increased. And hydraulic head decreased along the fracture zone because of much water-flow. The grouting increased the groundwater head around cavern. An analysis of groundwater flow through discontinuity network was performed around underground oil storage cavern which is now under construction. The probabilistic density functions(P.D.F) were obtained from the investigation of the discontinuity trace map. When the anisotropic hydraulic conductivity is used, the flow rate into the cavern was below the acceptable value to maintain the hydraulic containment. But when the isotropic hydraulic conductivity is used, the flow rate was above the acceptable value.

• Corrosion Science and Technology
• /
• v.12 no.2
• /
• pp.79-84
• /
• 2013

In general, pipelines at nuclear power plants are affected by various types of degradation mechanisms and may be ruptured after gradually thinning. FAC (Flow-Accelerated Corrosion) is typical aging mechanism affecting the secondary side piping system. In Korea nuclear power plants, CHECWORKS program have been used for management of wall thinning damages. However, sometimes, CHECWORKS program shows wrong results at the stage of NFA (Network Flow Analysis) in case of complex pipelines. This paper describes the calculation results of pressure drop in a complex pipeline and single line by using the CHECWORKS program and the analysis results are compared with those of engineering calculation results including errors between them.

• Journal of Electrochemical Science and Technology
• /
• v.5 no.1
• /
• pp.19-22
• /
• 2014

Here we report a highly sensitive and stable detection of $NAD^+$ and NADH by the electrode on which diaphorase (DI) is covalently immobilized in viologen polymer network. The network is prepared by the covalent formation of the structure by mixing propylamine viologen (PAV), poly(ethylene glycol)(400) diglycidyl ether (PEGDGE), an diaphorase (DI). The PAV/PEGDGE/DI modified electrode has the sensitivity of $0.02nA{\cdot}{\mu}M$ and the detection limit of $3{\mu}M$ with a response time of 2 s ($t_{90%}$) for NADH sensing.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1371-1374
• /
• 2002

This paper compares four network con-figurations for using as the logical topology in multi- hop wavelength division multiplexing (WDM) networks. The regular network configurations studied in this paper axe ShuffleNet, de Bruijn graph, hypercube, and Man-hattan street network. Instead of using the weight mean hop distance of node placement problem for comparing optimum logical topology, we introduce a new objective function that includes h and the network cost. It can be seen that the network cost strongly depends on the logical topology selected for the implementation of the network. The objective of this paper is to find an optimum logical topology for WDM networks that gives low as well as low network cost.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2164-2168
• /
• 2003

Real time control system such as in factory automation fields, defense field, aerospace, railway industries, financial trading and so forth, includes multiple computers on multiple nodes, and share data to process various actions and functions. This is similar to multitasking in a multiprocessor computer system. The task processing efficiency of such system is proportionally increased by process speed of each process computer. And also it is greatly influenced by communication latencies of each node. To provide proper operation of such real time system, a network that can guarantee deterministic exchange of certain amount of data within a limited time is required. Such network is called as a real time network. As for modern distributed control system, the timeliness of data exchange gives important factor for the dynamics of entire control system. In a real time network system, exchanged data are determined by off-line design process to provide the timeliness of data. In other word, designer of network makes up a network data table that describes the specification of data exchanged between control equipments. And by this off-line design result, the network data are exchanged by predetermined schedule. First, this paper explains international standard real time network TCN (Train Communication Network) applied to the KHST (Korean High Speed Train) project. And then it explains the computer program developed for design tool of network data table of TCN.

• Journal of information and communication convergence engineering
• /
• v.11 no.2
• /
• pp.69-81
• /
• 2013

Maintaining connectivity is essential in multi-hop wireless networks since the network topology cannot be pre-determined due to mobility and environmental effects. To maintain the connectivity, a critical point in the network topology should be identified where the critical point is the link or node that partitions the network when it fails. In this paper, we propose a new critical point identification algorithm and also present numerical results that compare the critical points of the network and H-hop sub-network illustrating how effectively sub-network information can detect the network-wide critical points. Then, we propose two localized topological control resilient schemes that can be applied to both global and local H-hop sub-network critical points to improve the network connectivity and the network resilience. Numerical studies to evaluate the proposed schemes under node and link failure network conditions show that our proposed resilient schemes increase the probability of the network being connected in variety of link and node failure conditions.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.11
• /
• pp.1038-1047
• /
• 2000

The objective of this study is to develop an optimized Artificial Neural Network(ANN) model to predict the descending time of room air temperature. For this, program for predicting room air temperature and ANN program using generalized delta rule were collected through simulation for predicting room air temperature. ANN was trained and the ANN model having the optimized values-learning rate, moment, bias, number of hidden layer, and number of neuron of hidden layer was presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2882-2887
• /
• 2010

This research develops an evaluation framework of social network analysis, overlooked in traditional program evaluation, and applies to university funding research program. By setting degree increase, an indicator of level of research collaboration, as a goal from the viewpoint of network, we can conclude that researchers funded by university in a form of competition show statistically significant changes in degree increase via one-way ANOVA and permutation-based simulation. This research provides a tool for measuring and managing the degree of contribution of university funding to promoting research collaboration.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.885-892
• /
• 2020

The purpose of this study was to determine the social engagement network in Sido Muncul's CSR, the partnership program with farmers, and how the implementation of corporate social entrepreneurship in the program is carried out. The research design uses qualitative methods with a grounded theory approach that tests the validity and reliability of the data using triangulation of data sources and methods, namely, data obtained through documentation and the results of surveys and interviews to more than one observation unit. Data was obtained from surveys and interviews with Sido Muncul's Public Relations and CSR Division, as well as partner farmers. The results of this study indicate that the social engagement network in Sido Muncul's partnership program is related to the role of farmer groups, farmer cooperatives, government, NGOs, universities, and private companies as facilitators and control functions, thus creating mutually beneficial relationships with one another. The process of implementing corporate social entrepreneurship in Sido Muncul's CSR for the partnership program with farmers consists of nine stages: problem identification, coordination with related parties, allocation of resources and commitments, collaboration with NGOs, local entrepreneurs and government, social innovation and the creation of new businesses, documentation of activities, reporting, monitoring and evaluation, as well as publications.

• International Journal of Computer Science & Network Security
• /
• v.22 no.4
• /
• pp.261-273
• /
• 2022

Over the last decade, the scientific community has been actively developing technologies for automated software bug fixes called Automated Program Repair (APR). Several APR techniques have recently been proposed to effectively address multiple classroom programming errors. However, little attention has been paid to the advances in effective APR techniques for software bugs that are widely occurring during the software life cycle maintenance phase. To further enhance the concept of software testing and debugging, we recommend an optimized automated software repair approach based on hybrid technology (OAPR-HOML'1). The first contribution of the proposed OAPR-HOML'1 technique is to introduce an improved grasshopper optimization (IGO) algorithm for fault location identification in the given test projects. Then, we illustrate an opposition learning based artificial neural network (OL-ANN) technique to select AST node-level transformation schemas to create the sketches which provide automated program repair for those faulty projects. Finally, the OAPR-HOML'1 is evaluated using Defects4J benchmark and the performance is compared with the modern technologies number of bugs fixed, accuracy, precession, recall and F-measure.