• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.263-266
• /
• 1997

The purpose of this paper is the development of Integrated Bio-signal Management System. (IBMS) using the network. IBMS is the system to manage the medical signals that measured from the each independent medical measurement system module. Each has a LAN Card. We developed the Network Application using Socket Library. Also, we developed the Graphic User Interface software for IBMS using Visual C++ on Windows 95.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.76-87
• /
• 2014

Today the energy consumption of ICT networks is about 10% of the worldwide power consumption and is predicted to increase remarkably in the near future. For this reason, this paper studies energy saving strategies assuring the network-level QoS. In the strategies, the energy consumption of NIC(network interface card) on both endpoint of links decreases by selecting links and making them sleep when the total traffic volume of the IP network is lower than a threshold. In this paper, we propose a heuristic routing algorithm based on so-called delegating/delegated routers, and evaluate its characteristics using computer simulation considering network-level QoS. The selection of sleep links is determined in terms of the number of traffic paths (called min_used path) or the amount of traffics(called min_used traffic) through those kinks. To our experiment, the min_used traffic method shows a little better energy saving but the increased path length compared to the min_used path method. Those two methods have better energy saving characteristics than the random method. This paper confirms that the delegating/delegated router-based routing algorithm results in energy saving effects and sustains network-level QoS in IP networks.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.12
• /
• pp.1241-1248
• /
• 2006

In high reliability systems for industrial network such as railway signal system, fieldbus protocols have been known to satisfy the real-time and fault tolerant requirements. But, the application of fieldbus has been limited due to the high cost of hardware and software, and the difficulty in interfacing with multi-vendor products. Therefore, as an alternative to fieldbus, the computer network technology, especially Ethernet(IEEE 802.3), is being adapted to the industrial network. In this paper, we propose a switched Ethernet based railway signal system because of its very promising prospect for industrial application due to the elimination of uncertainties in the network operation. In addition, we propose the redundancy architecture for the reliability of network components. More specifically, this paper presents an analytical performance evaluation of switched Ethernet for railway signal system, and shows experimental evaluation of redundancy architecture.

• Journal of Biomedical Engineering Research
• /
• v.14 no.4
• /
• pp.315-320
• /
• 1993

This paper deals with a subject for implementation of L+ayer 1 and Layer 2(LAPD) of ISDN user-network interface on the basis of CCITT recommandation I.411, I.412, I.441 (Q.921), I.450(Q.930) and I.451 (Q.931) for ultrasonic image transfer. For the implementa tion of LAPD protocol of ISDN in this study. PC-CARD based hardware(TA :Terminal Adopt) is proposed and operating system (PC-XINU) supporting the Multiprocessing is transplanted to it. As the Service Access Point(SAP) is accessed by using the port of XINU and Layers which consist of transmitting and receiving part are independantly processed for each other in this proposed system. It can be easy and flexible to implement LAPD protocol for the message transfer.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.10
• /
• pp.21-30
• /
• 1994

We discussed the Distributed Control System's design on preface and analyzed time of the real-time communication by using designed system. The DCS proposed in this thesis was implemented to network file system having recovery advantage and shared memory method to access file system of a Remote Station with ease. Also, this system minimized the network delay-time by using the real-time VME147 board. In implemented DCS, the performance analysis of real-time process of a Remote Station was done to get the total time for reak-tune communication from a Remote Station to the Central Station after terminating of process. For the analysis of system performance, we experiented by three steps. Firstly, we measuredthe processing the of LOOP function that real-time CPU convertes to-2,500~10.000 values from the input data of the Analog Interface Card. Secondly, we measured the processing time of the LOGIC function and the LOOP function. Lastly, we measured total processing time for communication from a Remote Station to the Centrol Station.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.116-140
• /
• 1997

The base station transceiver subsystem (BTS) of the CDMA Mobile System is interfaced to mobile stations over the air and to the wired network through a packet switched interconnection network. The potential benefits of CDMA technology are achieved when the transmitter and the receiver are properly designed and implemented. The physical layer of the interface at the base station is implemented with the CDMA ASICs and control circuits in channel card of the BTS. We present the design perspectives and structural illustration of the BTS. Base station modem ASICs and their control to implement the CDMA receiver, Baseband and RF signal processing blocks, and BTS controller are described. Elaborate power control is essential to ensure the high capacity which is one of advantages of the CDMA technology. The closed loop reverse link power control and the forward link power control operated in the BTS are described.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.326-329
• /
• 2003

최근 인터넷을 대상으로 한 사이버 공격의 공격 경향은 분산 환경에서 다수 공격자의 대규모 분산 서비스 거부 공격(DoS)의 출현 및 해외 해커들의 국내 전산망을 우회 루트로 활용한 사례의 증가 등 고도화된 불법 행위가 점차 범죄의 강력한 수단으로 이용되는 추세에 있다. 본 논문은 기존 네트워크에서 해당 네트워크의 침입자의 트래픽 차단 방법의 취약점을 보완하여 2-MAC 인증 패킷을 이용한 효율적인 공격자 추적기법을 제안하였다. 제안된 방식은 기존 시스템에서의 NIC(Network Interface Card)의 물리적 주소인 MAC(Media Access Control)과 메시지 인증코드(MAC： Message Authentication Code)를 이용한 방식을 제안하였다.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.7
• /
• pp.1770-1780
• /
• 1997

Our problem is improvement of image quality because it is inevitable cell loss of image data when traffic congestion occurs. If cells are discarded indiscriminately in transmission of MPEG video data, it occurs severe degradation in quality of service(QOS). In this paper, to solve this problem, we propose two method. The first, we analyze the traffic characteristics of an MPEG encoder and generate high priority and low priority data stream. During network congestion, only the least low priority cells are dropped, and this ensures that the high priority cells are successfully transmitted, which, in turn, guarantees satisfactory QoS. In this case, the prioritization scheme for the encoder assigns components of the data stream to each priority level based on the value of a parameter ${\beta}$. The second, Number of high priority cells are increased when value of ${\beta}$ is large. It occurs the loss of high priority cell in the congestion. To prevent it, this paper is regulated to data stream rate as buffer occupancy with UPC controller. Therefore, encoder's bandwidth can be calculated renegotiation of the encoder and networks. In this paper, the encoder's bandwidth requirements are characterized by a usage parameter control (UPC) set consisting of peak rate, burstness, and sustained rate. An adaptive encoder rate control algorithm at the Networks Interface Card(NIC) computes the necessary UPC parameter to maintain the user specified quality of service. Simulation results are given for a rate-controlled VBR video encoder operating through an ATM network interface which supports dynamic UPC. These results show that dynamic bandwidth renegotiation of prioritized data stream could provided bandwidth saving and significant quality gains which guarantee high priority data stream.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2649-2652
• /
• 2003

In this Paper, an Audio-Visual Teaching aid (AVTA) for use in a classroom and with Internet is presented. A system, which was designed and tested, consists of a wireless Microphone system, Text to Speech conversion Software, Noise filtering circuit and a Computer. An IBM compatible PC with sound card and Network Interface card and a Web browser and a voice and text messenger service were used to provide slightly delayed text and also voice over the internet for remote teaming, while providing scrolling text from a real time lecture in a classroom. The motivation for design of this system, was to aid Korean students who may have difficulty in listening comprehension while have, fairly good reading ability of text. This application of this system is twofold. On one hand it will help the students in a class to view and listen to a lecture, and on the other hand, it will serve as a vehicle for remote access (audio and text) for a classroom lecture. The project provides a simple and low cost solution to remote learning and also allows a student to have access to classroom in emergency situations when the student, can not attend a class. In addition, such system allows the student in capturing a teacher's lecture in audio and text form, without the need to be present in class or having to take many notes. This system will therefore help students in many ways.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.10
• /
• pp.2521-2532
• /
• 1997

The next generation internet protocol, IPv6, have been developed by the IETF according to the requirements of enhancement of classic IP protocols to satisfy the lack of Internet address space as well as the support of multimedia applications. This paper presents an implementation of IPv6 protocols on the Windows NT kernel environment. In this work, we developed and also tested the basic functions, required for operating as an IPv6 host, such as IPv6 header processing, IPv6 address handling, control message processing, group membership processing and neighbor discovery functions. The implemented IPv6 protocol driver module is connected to the lower network interface card through NDIS, a standard network interface. And this driver module that operates within kernel, is implemented as it is connected to upper user applications and lower NDIS using dispatch and lower-edge functions. The developed IPv6 protocol driver can provide not only enhanced performance because it is implemented in kernel mode, but also convenience of usage to the application developers because it gives user interface as a dynamic link library.