• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.7 no.4
• /
• pp.267-273
• /
• 2007

This paper presents the implementation of an educational kit for intelligent system control education. Neural network control algorithms are presented and control hardware is embedded to control the inverted pendulum system. The RBF network and the MLP network are implemented and embedded on the DSP 2812 chip and other necessary functions are embedded on an FPGA chip. Experimental studies are conducted to compare performances of two neural control methods. The intelligent control educational kit(ICEK) is implemented with the inverted pendulum system whose movements of the cart is limited by space. Experimental results show that the neural controllers can manage to control both the angle and the position of the inverted pendulum systems within a limited distance. Performances of the RCT and the FEL control method are compared as well.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.560-563
• /
• 2002

This paper proposes a home control system architecture that have network configuration function. The proposed home control system architecture is implemented with partly hardware and software. For implementation of this system architecture, we developed ECONICS which is home automation controller. ECONICS consists of main board and communication modem. This communication modem supply the power line communication. The physical layer and the MAC layer software of EIA 709.1 standard protocol are implemented in communication modem. The upper layer software of EIA 709.1 standard protocol and home configuration software for home network installation, management, diagnostics, control and monitoring are implemented in main board of ECONICS. We verified the commercial feasibility of the proposed system through the home network configuration and operation. As a result, we have concluded that the proposed home control system architecture provides all the key function necessary to easily manage and control home network nodes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2296-2300
• /
• 2005

This paper deals with the real-time message network system by a CAN (controller area network) based on the real-time distributed control scheme to integrate actuators and sensors in a humanoid robot. In order to apply the real-time distributed processing for a humanoid robot, each control unit should have the real-time efficient control method, fast sensing method, fast calculation and real-time valid data exchange method. Moreover, the data from sensors and encoders must be transmitted to the higher level of control units in maximum time limit. This paper describes the real-time message network system design and the performance of the system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.598-601
• /
• 2001

As many sensors and actuators are used in many automated system, various industrial networks are adopted for digital control system. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network delays. This paper presents the implementation scheme of a networked control system via Profibus-DP network. More specifically, the effect of the network delay on the control performance was evaluated on a Profibus-DP testbed, and a GA based PID tuning algorithm is proposed to demonstrate the fesibility of the networked control system.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.7
• /
• pp.815-823
• /
• 1999

This study considers an implementation of artificial neural networks to the receding horizon optimal control and is applications to power systems. The Generalized Backpropagation-Through-Time (GBTT) algorithm is presented to deal with a quadratic cost function defined in a finite-time horizon. A decentralized approach is used to control the complex global system with simpler local controllers that need only local information. A Neural network based Receding horizon Optimal Control (NROC) 1aw is derived for the local nonlinear systems. The proposed NROC scheme is implemented with two artificial neural networks, Identification Neural Network (IDNN) and Optimal Control Neural Network (OCNN). The proposed NROC is applied to a power system to improve the damping of the low-frequency oscillation. The simulation results show that the NROC based power system stabilizer performs well with good damping for different loading conditions and fault types.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3159-3161
• /
• 1999

This paper aims at developing remote control system to control and monitor distributed various devices through internet or information communication network. SNMP (Simple Network Management Protocol) and UPS (Uninterruptible Power Supply) are adopted for network management protocol and applied device, respectively. For controlling and monitoring distributed devices in real-time, Java-environment software is constructed. Also, general-use interface controller between network device and applied device is proposed. Finally, serial communication such as RS-232 and RS-485 is used between controller and applied device.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.301-306
• /
• 2006

The important field of research on ship operation is related to the high efficiency of transportation, the convenience of maneuvering ships and the safety of navigation. As a way of practical application for a smart ship based on network system, this paper proposes the intelligent support system for ship steering control system based on TCP/IP and desires to testify the validity of the proposal by applying the fuzzy control model to the steering control system. As the specific study methods, the fuzzy inference was adopted to build the maneuvering models of steersman, and then the network system was implemented using the TCP/IP socket-based programming. Lastly, the miniature model steering control system combined with LIBL (Linguistic Instruction-based Learning) was designed to testify for its effectiveness.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.6
• /
• pp.596-602
• /
• 2007

Recently, many ECUs(Electronic Control Units) have been used to enhance the vehicle safety, which leads to a distributed real-time control system. The distributed real-time control system requires to reduce the network delay for dependable real-time performance. There are two different paradigms by which a network protocol operates: event-triggered and time-triggered. This paper focuses on implementation of a time-triggered protocol. i.e. TTP/C(Time-Triggered Protocol/class C). This paper presents a design method of TTP control network and performance evaluation of distributed real-time control system using TTP protocol.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.901-904
• /
• 1998

In this paper, we describes PID-neural network controller for the rotary inverted pendulum. PID control is applied to many fields but has some problems in nonlinear system due to a variation of parameter. So, we should desing the controller which is adjusted PI parameters by the neural network which is learned by backpropagation algorithm. And we show that on-line control is possible through the PID-neural network controller. The angle of the pendulum is controlled and then the position of the rotating arm is also controlled to maintain with in the set point. Measurement of the pendulum angle is obtained using a potentionmeter. The objective of the experiment is to design a PID-neural network control system that positions the arm as well as maintains the ivnerted pendulum vertical. Finally, we describe the actual experiment system and confirm the experimental results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1676-1681
• /
• 2012

In network-based control system, measurement and control information is delivered by the network messages. Therefore, the performance of control system is directly affected by the performance of network system. System engineers need to evaluate the performance of network system to maintain the entire system in stable condition. BACnet is an international standard data communication protocol especially designed for building automation and control systems. In this study, experimental performance evaluation methodologies of BACnet MS/TP protocol and their practical evaluation results are presented.