• 전기학회논문지
• /
• 제65권2호
• /
• pp.354-359
• /
• 2016

Power plants maintenance data is to be sent to management server system via a communication network. In this case, reliable communication network is required. Transmission of the power plants maintenance data is used in the wired communication network or wireless communication network. PLC communication network is a kind of wired communication network. However PLC communication network is easily affected by noise. On the vulnerable areas in power line system, such as a mountain or rural areas, it is difficult to form a power line communication network. For a wireless communication, environment are also influenced factors in wireless communication. Harsh environmental factors are bring the communication characteristic degradation. In such areas it can be used a combination of two networks and in this way the complementary function can be achieved. Power plants are distributed in various regions across the country. The appropriate communication network is needed to maintain the power plant.This study investigated the effect of environment on the wired communication and wireless communication. It would examine a variable factor which is affect to the communication characteristic. We used PLC communication for wired communication network and ZigBee communication for wireless communication network. We investigated the characteristics of a single communication network and it raised the need for a complex communication technology to complement a single communication network.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.707-710
• /
• 2005

In this paper, we propose a new communication network for on-chip communication. The network is based on a direct sequence code division multiple access (DS-CDMA) technique. The new communication network is suitable for a parallel processing system and also drastically reduces the I/O pin count. Our network architecture is mainly divided into a CDMA-based network interface (CNI), a communication channel, a synchronizer. The network includes a reverse communication channel for reducing latency. The network decouples computation task from communication task by the CNI. An extreme truncation is considered to simplify the communication link. For the scalability of the network, we use a PN-code reuse method and a hierarchical structure. The network elements have a modular architecture. The communication network is done using fully synthesizable Verilog HDL to enhance the portability between process technologies.

• 한국군사과학기술학회지
• /
• 제16권5호
• /
• pp.666-674
• /
• 2013

This paper studied about the design and implementation of tactical communication network simulator in order to obtain tactical communication network parameter, such as link capacity and routing plan, and a number of exceptional cases that may occur during actual deployment by conducting simulation of a large-scale tactical communication networks. This tactical communication network simulator provides equipment models and link models of commercial OPNET simulator for tactical communication network. In addition, 6 types of simulation scenario writings convenience functions and traffic generation models that may occur in situations of tactical communication network environment were implemented in order to enhance user friendliness. By taking advantages of SITL(System-In-The-Loop) function of OPNET, the tactical communication network simulator allows users to perform interoperability test between M&S models and actual equipment in operating simulation of tactical communication network, which is run on software. In order to confirm the functions and performance of the simulator, small-scale of tactical communication network was configured to make sure interoperability between SITL-based equipment and a large-scale tactical communication network was simulated and checked how to cope with traffic generated for each network node. As the results, we were able to confirm that the simulator is operated properly.

• 한국컴퓨터정보학회논문지
• /
• 제23권12호
• /
• pp.49-55
• /
• 2018

In this paper, we propose schemes of blockchain utilization in tactical communication environment. The military tactical communication environment has similar characteristics with blockchain network such as distributed architecture, decentralization, and the need for data integrity. A communication node constituting a tactical communication network is constituted by a system capable of configuring and connecting a network for each node. When a communication node, having such capabilities, is configured as a node of blockchain network, various functions could be performed. In this paper, we propose utilization schemes of authentication, integrity, record management, and privilege control based blockchain technology. Functions for authentication, integrity verification, and record management need to ensure the stored data and could track history. The requirement of function's characteristics are matched to blockchain which is storing data sequentially and difficult to hack data, so that it could perform functionally and sufficiently well. Functions for authority control should be able to assign different privileges according to the state of the requestor. Smart contract will function when certain conditions are satisfied and it will be able to perform its functions by using it. In this paper, we will look over functions and utilization schemes of blockchain technology which could reliably share and synchronize data in a tactical communication environment composed of distributed network environment.

• 조명전기설비학회논문지
• /
• 제24권10호
• /
• pp.49-57
• /
• 2010

In order to provide electricity to users economically and safely, distribution automation systems (DASs) monitor and operate components of distribution systems remotely through communication networks. The fiber optic communication network has been mainly installed for the DAS of Korea Electric Power Corporation (KEPCO) because of its huge bandwidth and dielectric noise immunity. However, the fiber optic communication network has some shortcomings that its installation cost and communication fee are expensive. This paper proposes a complex network where WLANs are combined with conventional fiber optic communication networks in order to expand DAS easily and inexpensively. A fixed wireless bridge communication unit (FWB-CU) for the proposed complex network is implemented using IEEE 802.11a WLAN technology. The proposed complex network is built actually to verify its feasibility experimentally as a DAS communication network.

• 한국시뮬레이션학회논문지
• /
• 제27권4호
• /
• pp.27-45
• /
• 2018

지상 통신 네트워크와 수중음파 통신 네트워크는 동작 환경, 통신 매체, 전파 지연 속도, 주파수 대역폭, 통신 속도, 비트 에러율 등에서 매우 다른 통신 특성을 갖는다. 이러한 다른 특성들로 인해 이들 두 통신 네트워크는 주소체계와 최대 패킷 크기에서 차이가 생기며, 결과적으로, 이 차이는 두 통신 네트워크를 상호연결 하는데 장애가 될 수밖에 없다. 본 논문은 지상 통신 네트워크와 수중음파 통신 네트워크 사이에서 서로 다른 주소체계로 인해 발생하는 상호연결 문제를 해결하기 위해 가상 주소를 이용하는 방법을 제시하고 수학적 모델링을 통해 수중 환경에서의 메시지 송수신 지연 시간에 대한 성능을 분석한다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제8권4호
• /
• pp.193-204
• /
• 2008

In this paper, we proposed availability evaluation of network in mobile communication network that have hand off structure. Radio mobile communication network is essential hand off action to keep communication that is no discontinuance by transfer of terminal. Part by state and hand off state ago hand off by transfer of terminal and communication network is estimated performance according to the hand off rate and hand off completion rate of system. we applied MS, SM, MM communication structure in radio CORBA for network availability evaluate. System availability in mobile communication network that can repair that propose in this study uses the hand off rate and hand off completion rate of system by transfer of terminal and availability of whole system did evaluate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.602-605
• /
• 2001

This paper focus on a method to use Ethernet Network for Industrial Communication Network. Ethernet use the CSMA/CD MAC(Medium Access Control) Protocol at the Data-Link Layer, Which isn't suit for Industrial Communication Network requiring Real-Time Communication, periodic data processing, critical data processing characteristics. In this paper we proposed the Virtual Polling Algorithm at the Application Layer will be solution of using the Ethernet Network for the Industrial Communication Network, Proposed Algorithm terminate the Collision in the network thus Delay Time is reduced and Real-Time Communication will be implemented.

• 대한임베디드공학회논문지
• /
• 제16권1호
• /
• pp.9-15
• /
• 2021

Recently, it is increasingly necessary to run high-end neural network applications with huge computation overhead on top of resource-constrained embedded systems, such as wearable devices. While the huge computational overhead can be alleviated by distributed neural networks running on multiple separate devices, existing distributed neural network techniques suffer from a large traffic between the devices; thus are very vulnerable to communication failures. These drawbacks make the distributed neural network techniques inapplicable to wearable devices, which are connected with each other through unstable and low data rate communication medium like human body communication. Therefore, in this paper, we propose a distributed neural network partitioning technique that is resilient to communication failures. Furthermore, we show that the proposed technique also improves the inference accuracy even in case of no communication failure, thanks to the improved network partitioning. We verify through comparative experiments with a real-life neural network application that the proposed technique outperforms the existing state-of-the-art distributed neural network technique in terms of accuracy and resiliency to communication failures.

• 한국해양공학회지
• /
• 제11권4호
• /
• pp.180-188
• /
• 1997

This paper proposes a new efficient MAC(Media Access Control) protocol to establish the ultrasonic communication network for underwater vehicles, which ensures a certain level of maximum throughput regardless of the propagation delay of ultrasonic and allows fast data transmission through the multiple ultrasonic communication channel. A MAC protocol for underwater communication network that allows 'peer-to-peer' communication between a surface ship and multiple underwater systems is designed, and the proposed control protocol is implemented for its verification.