• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.809-819
• /
• 2000

This paper deals with an optimal capacity allocation problem and performance analysis in Advanced Information Communication Processing System(AICPS). AICPS is a gateway system interconnection PSTN(Public Switched Telephone Network), ISDN(Intergrated Services Digital Network), PSDN(Packet Switched Data Network), internet, Frame Relay and ATM together. This study considers not only ISDN and Internet but also user behavior of On-line service which is analyzed by Markov process. A call blocking probability of TNAS and INAS is computed by Erlang's formula. Then, PNAS and WNAS's call blocking probability are computed by Stochastic knapsack modeling. The result is compared with result of simulation. Finally, we allocate an optimal capacity minimizing total call blocking probability.

• Proceedings of the KSR Conference
• /
• 2008.06b
• /
• pp.27-41
• /
• 2008

Construction of metro transportation infra is a large-scale project requiring tremendous financial resources. This study suggests operation method to use for rapid transit line existing infra such as Gyeongbu line and spare line capacity following second phase KTX construction. Reviewing various constraints of metro rapid transit operation, we found that the conditions for metro rapid transit operation are already satisfied in Daegu area, just like the case of Gyeongbu line in Seoul Metro area. Also, the evaluation of the economic feasibility of metro rapid transit operation in Daegu area shows that B/C is about 2.4, which implies that there is sufficient economic feasibility. According to the result of sensitivity analysis, the project is economically feasible unless the passenger demand decreases 15% and construction costs increases more than 70%. B/C is evaluated large because the utilization of already exiting infra lowers the initial cost. As one of mass transportation system of large capacity, metro rapid transit can generate significant spillover effect: It will strengthen competitiveness of metro area by connecting cities within the area and by extending one-day life zone of the area, to say nothing of the benefit of improving traffic condition. The construction of metro rapid transit network is necessary for the mass transportation system of Yeongnam area as well as Daegu area, and it may work as a starting point for uniting Daegu and Gyeongbuk and strengthening regional competitiveness.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.6
• /
• pp.802-810
• /
• 1998

The purpose of this study is to find the analytic solution of determining the optimal capacity of processes and storages to meet the product demand. Recent trend to reduce product delivery time and to provide high quality product to customer requires the increasing capacity of storage facilities. However, the cost of constructing and operating storage facilities is becoming substantial because of increasing land value, environmental and safety concern. Therefore, reasonable decision making about the capacity of processes and storages is important subject for industries. The industrial solution for this subject is to use the classical economic lot sizing method, EOQ(Economic Order Quantity) model, trimmed with practical experience but the unrealistic assumption of EOQ model is not suitable for the chemical plant design with highly interlinked processes and storages. This study, a first systematic attempt for this subject, clearly overcomes the limitation of classical lot sizing method. The superstructure of the plant consists of the network of serially and/or parallelly interlinked processes and storages. A novel production and inventory analysis method, PSW(Periodic Square Wave) model, is applied. The objective function of optimization is minimizing the total cost composed of setup and inventory holding cost. The advantage of PSW model comes from the fact that the model provide a set of simple analytic solution in spite of realistic description of material flow between process and storage. The resulting simple analytic solution can greatly enhance the proper and quick investment decision for the preliminary plant design confronting diverse economic situation.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.3
• /
• pp.129-134
• /
• 2004

The Available Transfer Capability (ATC) is defined as the measure of the transfer capability remaining in the physical transmission network for further commercial activity above already committed uses. The ATC determination s related with Total Transfer Capability (TTC) and two reliability margins-Transmission Reliability Capability (TRM) and Capacity Benefit Margin(CBM) The TRM is the component of ATC that accounts for uncertainties and safety margins. Also the TRM is the amount of transmission capability necessary to ensure that the interconnected network is secure under a reasonable range of uncertainties in system conditions. The CBM is the translation of generator capacity reserve margin determined by the Load Serving Entities. This paper describes a method for determining the TTC and TRM to calculate the ATC in the Bulk power system (HL II). TTC and TRM are calculated using Power Transfer Distribution Factor (PTDF). PTDF is implemented to find generation quantifies without violating system security and to identify the most limiting facilities in determining the network’s TTC. Reactive power is also considered to more accurate TTC calculation. TRM is calculated by alternative cases. CBM is calculated by LOLE. This paper compares ATC and TRM using suggested PTDF with using CPF. The method is illustrated using the IEEE 24 bus RTS (MRTS) in case study.

• Communications for Statistical Applications and Methods
• /
• v.16 no.6
• /
• pp.937-943
• /
• 2009

A network with variable link capacities is considered to be in a functioning state if it can transmit a maximum flow which is greater than or equal to a specified amount of flow. The links are independent and either function or fail with known probability. No flow can be transmitted through a failed link. In this paper, we consider the measures of importance of a link in such networks. We define the structural importance and reliability importance, with respect to capacity, of a link when the required amount of flow is given. We also present the performance importance with respect to capacity. Numerical examples are presented as well for illustrative purpose.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.11-17
• /
• 2009

This paper presents a new adaptive relay selection scheme for a regenerative orthogonal frequency division multiplexing access(OFDMA) relay network with fairness constrains. In the Proposed scheme, we select the best M relays out of a set of K potential relays to maximize system capacity. Among these selected relays, subcarriers are reallocated to satisfy fairness constraints as well as to minimize the degradation of the system performance. Afterwards, power allocation is performed for each subcarrier based on the water-filling method to enhance the performance improvement. By using the trade-off relationship between the system capacity and the fairness, the modified version of proposed scheme is also investigated.

• Computational Structural Engineering
• /
• v.9 no.2
• /
• pp.93-101
• /
• 1996

An artificial neural network is a computational model that mimics the biological system of the brain and it consists of a number of interconnected processing units where it can reasonably infer by them. Because the neural network is particularly useful for evaluating systems with a multitude of nonlinear variables, it can be used in experimental results predictions, in structural planning and in optimum design of structures. This paper describes the basic theory related to the neural networks and discusses the applicability of neural networks to predict the ultimate shear capacity of the precast concrete vertical joints by comparing the neural networks with a conventional method such as regression.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.5 no.4
• /
• pp.11-17
• /
• 2022

Purpose: This study discusses how Indonesia's response to the Corona Virus Disease-19 pandemic based on the perspective of housing policy capacity which consists of resources, organizations, and networks, politics, systems, and finance. Research design, data and methodology: This study used a qualitative method through a literature review. Data collection techniques were carried out by searching various sources and literature related to housing capacity theory and various data on Indonesia's response to the Covid 19 pandemic. Based on a literature review, this study adapted and modified the five components of capacity, namely resource capacity, organizational and network capacity, political capacity, system capacity and financial capacity in Indonesia in responding to the Covid-19 pandemic. Data analysis used analytical themes which consist of understanding the data, generating initial codes, looking for themes, reviewing themes, defining and naming themes, producing of manuscripts. Results: The results show that the weakness of the system capacity greatly affects Indonesia's housing policy capacity in responding to the Covid-19 pandemic and on the other hand the five housing capacities are an integrated process within the housing policy framework in Indonesia, especially to overcome the Covid-19 pandemic. Conclusions: The findings of this study are the importance of building a system capacity that is directly integrated with housing policy and the strengthening of the resources capacity, organizations, and networks, politics, and finance in the context of Indonesia's housing policy, especially in dealing with the Covid-19 pandemic situation.

• Journal of Korean Society of Transportation
• /
• v.19 no.1
• /
• pp.89-99
• /
• 2001

The conventional studies on equilibrium network design problem(ENDP) with fixed travel demand models assume that the future OD travel demand might not be changed even if the structure and the capacity of the network are improved. But this fixed demand assumption may loose its validity in the long-range network design because OD travel demand actually shifts with the network service level. Thus, it is desirable to involve the variable travel demand which is determined endogenously in the model in the optimal network design. In this paper a hi-level model formulation and solution procedure for ENDP with variable travel demand are presented. Firstly It is considered how to measure the net user benefits to be derived from the improved in link capacities, and the equilibrium network design problem considered here is to maximize the increase of net user benefit which results from a set of lift capacity enhancements within the budget constraints, while the OD travel demands and link travel times are obtained by solving the lower level network equilibrium problem with variable demand. And secondly sensitivity analysis is carried out to find the links to which the network equilibrium flow pattern is the most sensitive. Finally numerical example with simple network is carried out to test the validity of the model.

• ETRI Journal
• /
• v.28 no.6
• /
• pp.799-802
• /
• 2006

Capacity has always been a major concern in wireless networks. This letter studies the impact of mobility on the overall system capacity in wireless cellular networks. In this letter, we present a simple system model which we developed to capture the inherent relationships among system capacity, new call blocking probability, handoff dropping probability, call terminating probability, and bandwidth utilization rate. We investigate the complex relationship between mobility and capacity-related parameters. Through simulation, we demonstrate that mobility has a significant impact on capacity and is reversely proportional to the bandwidth reserved for handoff traffic.