• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.4
• /
• pp.419-425
• /
• 2020

DC distribution system has been evaluated as an excellent one in comparison with existing AC distribution network because it needs fewer power conversion stages and the full capacity of the equipment can be used without consideration for power factor. Recently, research and development on the implementation of DC distribution networks have been progressed globally based on the rapid advancement in power-electronics technology, and the technological developments from the viewpoint of infrastructure are also in progress. However, to configure a distribution network which is a distribution line for DC, more accurate and rapid introduction of analysis technology is needed for the monitoring, control and operation of the system, which ensure the system run flexible and efficiently. However, in case of a bipolar DC distribution network, there are two buses acting as slack buses, so the Jacobian matrix cannot be configured. Without solving this problem, DC distribution network cannot be operated when the network is unbalanced. Therefore, this paper presented a comprehensive method of analysis with consideration of operating elements which are directly connected between neutral electric potential caused by the unbalanced of load in DC distribution network with bipolar structure.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1716-1721
• /
• 2011

The Public Address and Passenger Information System of Rolling Stock should be able to perform automatic announcements in connection with TCMS(Train Control and Monitoring System), common announcements and emergency announcements for safe operation and the passengers. CCTV(Closed Circuit Television) System also should be able to watch passenger compartment for safety. Those equipments are very important thing for train service and safety. but the installation of equipment is restricted by space, weight, modulation. therefore, Passenger Information Intergrated System(PIIS) is required to consider economical efficiency, technical trend, expansion and space insufficiency. and system based on IP network has to be considered as new PIIS. so PIIS could meet economical efficiency and expansion. and it could go further and share network with TCMS and others.

• IE interfaces
• /
• v.25 no.3
• /
• pp.319-326
• /
• 2012

To effectively predict financial crisis, this paper presents an early warning system based on artificial intelligence technologies. Both Genetic Algorithms and Neural Networks are utilized for the proposed system. First, a genetic algorithm has been developed for the effective selection of economic indices, which are used for monitoring financial crisis. Then, an optimum weight of the selected indices has been determined by a neural network method. To validate the effectiveness of the proposed system, a series of experiments has been conducted by using the Korean economic indices from 2005 to 2008.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.11
• /
• pp.1933-1940
• /
• 2003

Recently, the importance of plant maintenance(PM) was highly raised to provide efficient plant operation which highly affects the productivity. For this reason, a number of engineering methodologies, such as risk-based inspection(RBI), fitness for service guidelines(FFS), plant lifecycle management(PLM), have been applied to improve the plant operation efficiency. Also, a network-based business operation system, which is called ERP(Enterprise Resource Planning), has been introduced in the field of plant maintenance. However, there was no attempt to connect engineering methodologies to the ERP PM system. In this paper, a knowledge-based information system for the plant operation of steel making company has been proposed. This system which is named as K-VRS(Knowledge-based Virtual Reality System), provides a connection between ERP plant maintenance module and knowledge-based engineering methodologies, and thus, enables network-based highly effective plant maintenance process. The developed system is expected to play a great role for more efficient and safer plant maintenance.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.4
• /
• pp.15-22
• /
• 2011

U-Healthcare service is a real-time service using the vital signs which are continuously transferred from monitoring sensors attached to mobile patients under the wireless network environments. It should monitor the health condition of mobile patients everywhere at any time. In this paper, we have improved two features of the three layered mobile patient monitoring system with load balancing ability. First, the simulation process has been improved by allowing the number of related nodes to be changed. Secondly, we have modified S node to which queue is added to reduce the loss rate of collecting data from patients during the delay of S node process. And the data from the patient with high priority can be transferred to the server immediately through the filtering function. Furthermore, we have solved the problem of redundancy in sharing information among S nodes by differentiating process time to each S node. By performing a DEVS Java-based system simulation, we have verified the efficiency of this improved system.

• Smart Media Journal
• /
• v.4 no.2
• /
• pp.46-54
• /
• 2015

Communication between ECUs (Electronic Control Units) in agricultural machineries tends to use IS011783 widely, that is PGN (Parameter Group Number) based communication protocol lays on CAN protocol by altering its identifier part. Messages in line are transferred and received between ECUs according to ISO11783 standard. This paper discusses about design of wireless monitoring system. We used an ARM Cortex-M3 microcontroller embedded development board and marvel8686 wireless module. The wireless ISOBUS monitoring system, attached to communication line, reads messages, interpret them, and display them on the screen in easily comprehendible form. It can be used to generate messages and monitor the traffic on physical bus systems. The monitoring system connected to ECUs, monitor and simulate real traffic of communication and functionality of the ECUs. In order to support our work, we have implemented the monitoring tool. The development consists of two parts: GUI of the application and firmware level programming. Hence the monitoring system is attached to the communication line and equipped by Wi-Fi module; farmer/dispatcher in a farm monitors all messages in communication line on personal computer and smart device.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.3
• /
• pp.157-162
• /
• 2011

This study is about implementing wireless transferring system in pre-hospital cardiopulmonary resuscitation(CPR). Also, this study includes monitoring based feedback between patient and hospital to increase the survival rate of emergency patient by developing the performance of cardiopulmonary resuscitation in pre-hospital. It minimizes the loss of flow rate or gastric inflation through the space between the airway and the esophagus, which enables the inspiration-expiration rate to be measured more precisely. Due to these reasons this study applied ET insertion based respiratory sensor to measure flow rate. The main indices of artificial ventilation are justified from minute respiration(V), end-tidal $CO_2(E_TCO_2)$, and tracheal pressure($P_{tr}$). The simulation is performed to verify the bandwidth and delay time of transport network for in-hospital monitoring even as transporting images and voice information simultaneously. The total bandwidth is 815 kbps, and WLAN (IEEE 802.11x) is used as communication protocol. The network load is under 1.5% and the transmit delay time is measured under 0.3 seconds.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.1
• /
• pp.9-14
• /
• 2016

Recently the number of the elderly who live alone are increasing more and more as the average life span is prolonged. The elderly are probably in danger at home without being helped due to external aggressions or sudden health problems. Accordingly, more and more interests are taken in medical welfare for the healthy life of the seniors. In this paper, we have developed a mobility and vitality signal monitoring system based on ZigBee-PSTN gateway for the elderly. This combination of ZigBee wireless sensor network and PSTN can be easily established even in the poor internet infrastructure as is usually common for the elderly, with the advantage of providing non-constrained monitoring feature. The research result can be extended to the future tele-medicine system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1266-1271
• /
• 2010

In this paper, we implemented a heartbeat-signal monitoring system that can measure and check the heartbeat of a human body in any time and anywhere. The implemented prototype is composed of heartbeat measurement terminal, gateway, and server that collect and process data. The terminal compose sensor network using ZigBee protocol. And server acquire heartbeat signal through differentiating collected data two times, and store above data to database and manage it. We can understand the status of examinee's heart without restriction and self-awareness. Through experiment, we confirmed the possibility of ubiquitous healthcare system based on sonsor network using the ZigBee.

• Journal of Sensor Science and Technology
• /
• v.28 no.5
• /
• pp.289-293
• /
• 2019

This paper presents a remote patient monitoring system for diagnostic pure-tone audiometry. A pure-tone audiometer was developed for basic hearing screening; its performance was evaluated according to international standards in terms of linearity, accuracy, and total harmonic distortion. Pure-tone audiometry has a maximum hearing level of 104.9 dB HL that is comparable with other commercial products. The audiometer shows satisfactory linearity with a deviation of ${\pm}0.4dB$, an accuracy of ${\pm}0.025%$, and a total harmonic distortion (THD) of 0.21%. The remote patient monitoring systems include remote control devices based on wide area network (WAN) connections and an audiometer connected in series. Through experimentation, we successfully performed real-time diagnostic communication without delay in transferring audiometric data. This system is expected to supply domestic equipment in the audiometric market and to improve the quality of life of patients in non-clinical environments.