• 콘크리트학회논문집
• /
• 제20권3호
• /
• pp.271-282
• /
• 2008

PCS 구조 시스템은 공장 제작 콘크리트 기둥과 휨, 전단성능에 유리한 철골보를 접합한 복합구조의 일종이다. 접합부는 기둥을 관통하는 볼트를 사용하여 단부평판 접합하게 된다. 따라서 건식공법이 가능하여 작업환경이 양호하고 공기단축이 가능하며 해체가 용이한 장점이 있다. 하지만 실험을 통해 PCS 시스템의 내진성능을 분석한 결과 강도, 강성, 에너지소산 능력은 ACI 기준에 만족하였으나, 초기 강성의 경우 실험체 모두 ACI 기준에 부족하였다. 초기강성이 저하된 요인을 조사하여 접합부 강성을 증가시킬 수 있는 방안을 마련하고자 컴퓨터 시뮬레이션을 하였다. ABAQUS를 사용하여 네오프랜 패드의 유무와 두께, 단부평판과 기둥의 접촉면 형상, 볼트 긴장력의 크기, 단부평판의 강성 등과 같이 접합부 강성에 영향을 주는 변수들로 연구를 수행하였다. 그 결과 기둥과 단부평판 사이의 초기 변형이나 네오프랜과 같은 채움재와 단부평판의 낮은 강성이 초기 강성을 저하시키는 것으로 조사되었다. 접합부 성능을 개선하는 방안으로 볼트간격을 조정하거나 스티프너로 보강하여 단부평판의 강성을 높이는 방법도 효과가 있었으나, 볼트의 긴장력을 증가하는 방법이 가장 효과적이었다. 단부평판의 상하부에 분리형 네오프랜 패드를 끼워 갭의 영향을 최소화하는 방법도 꽤 우수하였다.

• 대한수의학회지
• /
• 제13권2호
• /
• pp.103-109
• /
• 1973

By employing the vinylite and neoprene latex corrosion technique, the ramification and arrangement of A. renalis were observed in fifty adult dogs (100 kidneys). Obtained results were as follows: 1. In the dog a single renal artery arosed on each side from abdominal aorta in 99% and double renal arteries in 1%, a single bifurcated into the ramus dorsalis and ramps ventralis from which 2-6 segmental arteries originated. 2. The dorsal ventral planes of the kidney were divided separately into 3-6 vascular segments by the segmental artery into the parenchyma. Of them four segments were mostly frequent (in 73% of right kidney and 72% of left). 3. The ramifying method of the segmental artery from the ramus dorsalis et ventralis was divided 3 types and 12 kinds. 4. In 30 of 100 kidneys, either dorsal or ventral plane of a kidney was supplied from interlobar or segmental arteries belonging to the opposite ramps. In 29 of them, the dorsal plane was supplied from the ventral ramus. 5. Six right and 11 left kidneys had a common segment in the Extremitas cranialis of the kidney.

• 한국의상디자인학회지
• /
• 제22권3호
• /
• pp.33-47
• /
• 2020

As people have gained leisure time and become more interested in sports, various industries catering to these sports, including aquatic and underwater activities are growing. Many people are getting into scuba diving, where people can explore the sea at depths of more than 40-meters. Despite the increasing demand, there are limited studies on the sport. This study aims to provide basic research on materials suitable for developing technical scuba diving suits by analyzing several areas, such as design, material, sewing patterns, etc. The following trends were observed in all wetsuits: closure designs, ergonomic patterns, practical and functional details. Neoprene was the primary material of diving suits, and various functional materials were attached to the outer fabric or lining. The seam technique which minimized water contact and improved durability was sewing. Various techniques were also applied, such as flatlock stitching, GBS, LFS, etc. Subsequent studies shall investigate consumer preference etc. and other aspects, and continue to allow for the research and development of technical diving suits.

• 대한가정학회지
• /
• 제49권4호
• /
• pp.105-113
• /
• 2011

The purpose of this study was to develop the pattern of scuba diving suits for local men in their thirties by using 3D body-scanned data. It is widely acknowledged that draping method is more suitable than flat pattern for body shape as most scuba diving suits in the market are designed to fit the body tightly in a single piece with sleeves and legs. A dummy for this study was made based on men's standard clothing sizes in 30's which was derived from data of 2004 Size Korea. Accordingly, the basic body block was built upon through draping method. Next, a scuba diving suit was made from neoprene, followed by fit and the clothing pressure tests in order to evaluate the diving suit's functionality and comfort. The results of the fit test had high points of 4.33 in majority parts except armhole and crotch ones. In comparison of clothing pressure between wearer and dummy, the clothing pressure of wearer was indicated relatively low in most parts other than armhole and knee, resulting from cushion function of skin and muscle and high stretch of fabric.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1993년도 춘계학술대회논문집; 한국과학연구소, 21 May 1993
• /
• pp.147-147
• /
• 1993

All types of dynamic excitation, periodical, pulse or transient in vertical, horizontal or all three directions can be effectively reduced by vibration isolation systems. Typical elements for vibration isolation control are spring units consisting of a group of helical compression springs. In all cases of shock, transient or random excitation energy absorbing dampers have to be added to the spring units in order to reduce system response in the frequency range near the natural frequency of the isolation system. The same isolation system of spring units and viscos-dampers has been used since 1979 for passive protection of buildings and structures has been proved to by very advantageous for vibration and structure borne noise control. Not only because of high vertical flexibility of the spring units, compared for example with typical rubber or neoprene mounts out also because of the horizontal of flexibility, which can be adapted by modifying the spring dimensions to nearly every requirement. It is just normal to use the same basic elements for passive isolation as for active isolation.

• 해양환경안전학회지
• /
• 제5권1호
• /
• pp.29-36
• /
• 1999

인체의 표류특성을 규명하기 위해 1997년 8월부터 1998년 4월까지 실물을 이용한 현장실험을 실시하였다. 실험은 부산 영도구에 위치한 조도 부근해역에서 행하여졌고, 조난자로는 제중 60∼87kg, 키 170∼178 cm의 대학생들이 역할을 대신하였다. 실험중 조난자의 과도한 열손실을 방지하기 위해 네오프렌 재질의 5mm 잠수복을 착용하였다. 그리고 표류물체 주위의 유속 측정을 위해서는 비닐 백을 사용하였다. 결과 비교를 위해 조난자 옆에 스쿠버 장비를 갖추고 부력조절기에 바람을 가득 넣은 다이버를 함께 표류시켰다. 자료를 분석한 결과 잠수복만 입은 조난자 및 스쿠버 다이버의 평균 leeway rate는 각각 수면상 10m 높이 풍속의 약 0.4％와 1.3％이었다.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.62-69
• /
• 2008

As the concerns of dermal exposure of spray painters to isocyanates in the automobile industry, glove performance was examined like permeation rate and breakthrough time including fatigue test. Methylene chloride was used as the solvent for derivatization of the isocyanates with a 97.5% recovery. Ghost wipe pads were used to wipe the surface of the glove material after chemical penetration through the glove material placed under a disposable test cell. Several solvents were tested, such as thinner(xylene, toluene) and cleaning agent(acetone) by using a standard permeation test cell(AS/NZS standard 2161. part 10.3). Solvents accelerate chemical permeation through the gloves more quickly than pure HDI hardener products. The longest breakthrough times were from Nitrosolve gloves, not detected in 8 hours, compared with others like Latex, Neoprene, TNT and Dermo Plus. Therefore Nitrosolve gloves could be recommended as personal protective equipment in crash repair shops. In addition, revised exposure limit of korean regulation should be suggested for employee to minimize the risk of health symptoms.

• 한국의상디자인학회지
• /
• 제22권4호
• /
• pp.127-142
• /
• 2020

This study compared the domestic and international commercial design patterns and domestic consumer preferences for wetsuit designs to develop a user-centered wetsuit design. An analysis of the domestic and international design elements for 1,802 wetsuits sold online over the past three years showed that the most frequent shapes, dominant colors, and patterns were the same, as consumers tended to buy full suits that were black or had geometric patterns. Dominant colors and assort/accent colors were different from the survey results. Men's wetsuits used fewer colors and patterns than women's suits. Domestic wetsuits used fewer patterns than those sold abroad; in addition, colors were applied differently. A consumer preference survey conducted on 213 male and female consumers in their 20s and their 50s in Korea indicated that 53.5% of respondents were the most affected by the shape when choosing a wetsuit design. The preferred color scheme was two colors, with a vivid tone used as an accent color. The factor analysis results on wetsuit design preference uncovered the six factors: individuality, display, function, acceptance, imitation, and comparison. An independent sample t-test also showed that men perceive individuality, imitations, and comparison factors higher than women.

• 복식문화연구
• /
• 제31권5호
• /
• pp.692-704
• /
• 2023

This study analyzed 214 sports knee braces found on Chinese websites between October 2022 and November 2022 to assess product type (impact protection material, fastening method, and protection method), material composition, size, weight, and main characteristics. The product type was further categorized according to (1) use of hard guard and soft guard protection method; (2) cover type, strap type, and slip-on type fastening method; and (3) pressure type and support type protection method. It also noted the physical shock protection materials used, including foam (EVA or polyurethane) attached to joints as a buffer material and plastic (TPU or PP) that protects the user's knee from external impacts. The study found that the materials that primarily comprise sports knee braces are a combination of nylon, polyester, and neoprene. Additionally, it found that most sports knee braces available on the market are available in three sizes based on knee circumference: M (35-38cm), L (38-41cm), and XL (41-44cm), while some products are available in one size only. Furthermore, the majority of the 214 products studied weighed 200g, followed by 1,000g. Finally, in terms of product characteristics, many sports knee braces utilize ring-shaped silicone pads to distribute the load pressure on the knees or incorporate sturdy adhesive velcro to improve knee stability.

• 콘크리트학회논문집
• /
• 제22권4호
• /
• pp.441-450
• /
• 2010

건식공법이 가능하도록 기존의 접합 방식과 차별화 되는 PC 보-기둥 접합부를 개발하여 실용화하기 위한 기초 연구이다. 연속된 PC 기둥 양편에 위치한 보의 접합 단부를 고강도 관통형 연결재로 긴장하여 연결하는 'PC 보-기둥 맞댐 접합(BCJ_TB : precast beam column joints connected with thru-connects)'을 고안하고 실험적 연구를 수행하여 강도저하, 초기강성, 강성저하, 에너지소산능력 등의 내진성능을 분석하였다. 실험 결과에 기둥에서는 손상이 발생하지 않고 보 단부에서 압축파괴가 발생하는데, 이는 비부착 연결재의 초기긴장과 비부착 효과에 의하여 보 단부 콘크리트에 압축응력이 증가하기 때문인 것으로 분석되었다. 보 접합 단부에 CFRP로 구속 효과를 준 접합부의 성능이 상대적으로 우수하였고 네오프렌 패드로 보 기둥 접합면을 연결한 것이 다른 것에 비하여 초기강성을 제외하고는 우수한 내진성능을 보이는 것으로 분석되었다. 비부착 연결재를 사용한 접합부의 파괴모드를 개선하기 위하여 보 단부 콘크리트의 압축 성능을 향상시키고, 연결재의 변위를 적절히 조절할 수 있는 방법이 요구된다.