• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04a
• /
• pp.177-180
• /
• 2000

In this study, we investigated the pretilt angle generation and liquid crystal (LC) alignment by ultraviolet (UV) exposure during imidization of polyimide on the polymer with side chain. The generated pretilt angle of nematic (N) LC using in-situ photo-alignment method was smaller than that of the conventional UV photo-alignment method. Also, the generated pretilt angle of NLC tends to increase by annealing.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.7
• /
• pp.695-699
• /
• 2006

Injection time of liquid crystal (LC) by capillary action in a vertically aligned (VA) nematic LC cell takes longer than that in a homogeneously aligned (HA) LC cell because Miesowicz viscosity in the former is bigger than that in the latter. To reduce liquid crystal injection time in the VA cell, we applied vertical electric field while injecting so that the orientation of LC molecules is changed from vertical alignment to homogeneous alignment. Consequently, the injection speed is improved by 25 % when compared with the cell without an applied field.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1582-1584
• /
• 1997

We investigated the transcription of liquid crystal (LC) alignment method by using memory effect of nematic (N) LC on polyimide (PI) surface with side chain as for non-rubbing alignment techniques. That the monodomain alignment of aligned NLC is observed by polarizing microscope textures in the cells on PI surface with side chain, We obtained that the pretilt angle of NLC are generated about 3.7 degree on PI surface. We suggest that the LC alignment by using transcription aligngnment method is attributed to memory effect of NLC on PI surface.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.137-140
• /
• 2000

Synthesis of a new copoly (M4Ch-ChMA), copoly ((4-methacryloyloxy) chalcone-cholestery methacrylate), with chalconyl and cholesterol moiety characteristics for photoalignment materials was investigated. Good thermal stabilities of the synthesized copolymers are confirmed by thermogravimetric analysis (TGA) measurement. The pretilt angles of the nematic liquid crystal (NLC) are reduced as UV exposure time is increased on the copolymer surfaces. A pretilt angle of 81$^{\circ}$in NLC was observed with UV exposure of 3 min on the copolymer-3 surface. The NLCs pretilt angle is attributable to increased chalcone with increasing the UV exposure time.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.1
• /
• pp.75-88
• /
• 1996

Digital image capturing technology has been making great progress recently, and we can now simply capture the color image by digital camera, flat-bed scanner of Photo CD system. A lot of professionals are instrested in the capability of Photo CD and other digital images in the printing and publishing industry. But these images were not processed a suitable image processing to use in the hard copy. In this paper we described a method of the digital enhancement processiing to use in the printing and publishing industry. Experimental result show that the described method was useful and valid for the digital image enhancement to use in the hard copy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.116-119
• /
• 1997

We investigated new type non-robbing liquid crystal (LC) alignment techniques in the cell with slanted non-polarized ultraviolet (UV) irradiation on polyimide (Pl) film. It is shown that the uniform alignment for nematic (N) LC is obtained by using slanted non-polarized UV irradiation on Pl surface. We successfully obtained that the pretilt ang1e of NLC is generated about 3 degree in the LC cells by using slanted non-polarized UV irradiation with 70 degree on Pl surface. We consider that the pretilt angle generation for NLC is attributed to interaction between the LC molecular and the PI surface. We conclude that the uniform LC alignment is attributed to anisotropic dispersion force effect due to photo depolymerization of polymer on Pl surface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.6
• /
• pp.481-485
• /
• 1998

We investigated the generation of high pretilt angle for nematic liquid crystal (NLC) in a cell with obilique non-polarized ultraviolet (UV) light irradiation on mixtured polyimide surface. It was found that the monodomain alignment of NLC is obtained with an angle of incidence of 75∼85 degrees on PI surface. We consider that the monodomain alignment of NLC is attributed to anisotropic dispersion force effect to photo-depolymerization of polymer. We successfully observed that the pretilt angle of NLC is generated above 5 degree with an angle of incidence of 75∼85 degrees. It is considered that the pretilt angle generation NLC is attributed to interaction between the LC molecules and the polymer surfaces.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.4
• /
• pp.7-9
• /
• 2003

Viewing angle characteristics of a nematic liquid crystal (NLC) using a in-plane driven (IPD) vertical alignment (VA) cell without a negative compensation film on a homeotropic alignment layer were studied. Good voltage-transmittance (V - T) curves were obtained using the rubbing aligned IPD- VA cell. However, instability and low transmittances of V - T characteristics in photo aligned IPD- VA cell was measured. The EO performance of a rubbingaligned IPD- VA cell without a negative compensation film was wider than that of photoaligned IPD- VA cell and conventional VA cell. Also, the fabrication processes using the rubbing aligned IPD- VA cell mode be carried out with only one-sided rubbing.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.6
• /
• pp.477-480
• /
• 1998

In this paper, we investigated the liquid crystal(LC) alignment and generation of pretilt angle by using photo-alignment techniques on two kinds of polyimide(PI) surface, It was found that the uniform alignment for nematic(N) LC is obtained in a cell with slanted UV light irradiation on PI surface without side chain. We successfully observed that the pretilt angle of NLC is generated about $3^{\circ}$ with an incident angle of 70 degree on the PI surface without side chain. It is considered that the pretilt angle generation in NLC is attributed to interaction between the LC molecules and the polymer surfaces.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.265-268
• /
• 1995

We have studied the effect of the mesogenic core of nematic liquid crystals (NLCs) for polar (out-of-plane tilt) anchoring strength and surface order parameter on rubbed polyimide (PI) films. The order of polar anchoring strength for NLCs on rubbed PI films is 5CB > PCH5 > CCH5. This order is the same for all rubbing strengths investigated. The surface order parameter for NLCs is 5CB > PCH-5 > CCH5 on rubbed PI films. From these results, we suggest that the polar anchoring strength is strongly related to the surface order parameter.