• 제목/요약/키워드: negative emission

검색결과 325건 처리시간 0.034초

질소 이온 발광 분광법을 이용한 초음속 유동의 기체 온도 측정 (Gas Temperature Measurement in Supersonic Flows by N2+ Emission Spectroscopy)

  • 신지철
    • 대한기계학회논문집B
    • /
    • 제34권3호
    • /
    • pp.245-250
    • /
    • 2010
  • 초음속 유동에서의 공기 방전에 대한 기체 (회전) 온도를 측정하는 과정이 자세하게 소개되었다. 초음속 유동에서는 직접적인 온도 측정이 어려우므로 질소 분자 이온 스펙트럼의 광학적 발광 분광법을 이용하는 비침투 방식의 측정법이 사용되었다. 질소 분자 이온의 발광 스펙트럼 구조를 이해하기 위하여 발광선의 세기를 나타내는 관계식들에 대한 자세한 설명이 소개되었다. 유도된 발광 스펙트럼의 표현식을 이용하여 질소 이온의 first negative system을 구현하였고 실험으로 측정된 스펙트럼과 비교하였다. 합성 스펙트럼과 측정된 스펙트럼들은 밴드 스펙트럼 전 범위에 걸쳐서 6-8%의 상대오차 이내로 서로 일치함을 보여주었다. 마하 3의 초음속 경계층에서 25 mA의 직류 방전에 의한 기체 온도 분포 곡선을 측정한 결과 온도값이 최대 약 350 K인 선형적인 변화를 보여주었다.

The Influence of Industrial Structure Upgrading on Carbon Emission Efficiency in China

  • Song, Luyan
    • 산경연구논집
    • /
    • 제10권2호
    • /
    • pp.7-15
    • /
    • 2019
  • Purpose - The industrial structure upgrading can play an important role in promoting the carbon emission efficiency. Thus, this paper attempts to study the impact of industrial structure upgrading on carbon emission efficiency in order to reduce carbon emissions. Research design, data, and methodology - This paper selects panel data of 30 provinces and municipalities (autonomous regions) in China from 2001 to 2016, and divides them into three regions. The Moore index is used to measure the industrial structure upgrading, the non-radial SBM model based on undesired output is used to measure the slack variable to calculate the total factor carbon emission efficiency. Finally the impact of industrial structure upgrading on the carbon emission efficiency are analyzed. Results - It is found that the Moore index and the carbon emission efficiency in the eastern region is the highest in the three regions. Conclusions - The influence of various influencing factors on carbon emission efficiency is different between regions. The Moore index has a positive effect on the carbon emission efficiency in the eastern region, and has a negative influence coefficient on the central region. The effect on the western region is not obvious.

Use of positron emission tomography-computed tomography to predict axillary metastasis in patients with triple-negative breast cancer

  • Youm, Jung Hyun;Chung, Yoona;Yang, You Jung;Han, Sang Ah;Song, Jeong Yoon
    • 대한종양외과학회지
    • /
    • 제14권2호
    • /
    • pp.135-141
    • /
    • 2018
  • Purpose: Axillary lymph node dissection (ALND) and sentinel lymph node biopsy (SLNB) are important for staging of patients with node-positive breast cancer. However, these can be avoided in select micrometastatic diseases, preventing postoperative complications. The present study evaluated the ability of axillary lymph node maximum standardized uptake value (SUVmax) on positron emission tomography-computed tomography (PET-CT) to predict axillary metastasis of breast cancer. Methods: The records of invasive breast cancer patients who underwent pretreatment (surgery and/or chemotherapy) PET-CT between January 2006 and December 2014 were reviewed. ALNs were preoperatively evaluated by PET-CT. Lymph nodes were dissected by SLNB or ALND. SUVmax was measured in both the axillary lymph node and primary tumor. Student t-test and chi-square test were used to analyze sensitivity and specificity. Receiver operating characteristic (ROC) and area under the ROC curve (AUC) analyses were performed. Results: SUV-tumor (SUV-T) and SUV-lymph node (SUV-LN) were significantly higher in the triple-negative breast cancer (TNBC) group than in other groups (SUV-T: 5.99, P<0.01; SUV-LN: 1.29, P=0.014). The sensitivity (0.881) and accuracy (0.804) for initial ALN staging were higher in fine needle aspiration+PET-CT than in other methods. For PET-CT alone, the subtype with the highest sensitivity (0.870) and negative predictive value (0.917) was TNBC. The AUC for SUV-LN was greatest in TNBC (0.797). Conclusion: The characteristics of SUV-T and SUV-LN differed according to immunohistochemistry subtype. Compared to other subtypes, the true positivity of axillary metastasis on PET-CT was highest in TNBC. These findings could help tailor management for therapeutic and diagnostic purposes.

Dietary manipulation: a sustainable way to mitigate methane emissions from ruminants

  • Haque, Md Najmul
    • Journal of Animal Science and Technology
    • /
    • 제60권6호
    • /
    • pp.15.1-15.10
    • /
    • 2018
  • Methane emission from the enteric fermentation of ruminant livestock is a main source of greenhouse gas (GHG) emission and a major concern for global warming. Methane emission is also associated with dietary energy lose; hence, reduce feed efficiency. Due to the negative environmental impacts, methane mitigation has come forward in last few decades. To date numerous efforts were made in order to reduce methane emission from ruminants. No table mitigation approaches are rumen manipulation, alteration of rumen fermentation, modification of rumen microbial biodiversity by different means and rarely by animal manipulations. However, a comprehensive exploration for a sustainable methane mitigation approach is still lacking. Dietary modification is directly linked to changes in the rumen fermentation pattern and types of end products. Studies showed that changing fermentation pattern is one of the most effective ways of methane abatement. Desirable dietary changes provide two fold benefits i.e. improve production and reduce GHG emissions. Therefore, the aim of this review is to discuss biology of methane emission from ruminants and its mitigation through dietary manipulation.

Environmental Performance, Carbon Emission Disclosure, and Carbon Emission Intensity on Cost of Equity Capital: An Empirical Study in Indonesia

  • MARSELITA, Octa;Lindrianasari, Lindrianasari;ALVIA, Liza;EVANA, Einde
    • 산경연구논집
    • /
    • 제12권11호
    • /
    • pp.9-16
    • /
    • 2021
  • Purpose: Carbon emissions have now become a major concern around the world, especially for the government and private sector. Unfortunately, in Indonesia, disclosure related to company carbon emissions is still done voluntarily. This research aims to provide empirical evidence on the effect of environmental performance, carbon emission disclosure, and carbon emission intensity on the cost of equity capital. Research design, data, and methodology: This research uses secondary data with a sample consisting of Indonesia companies that are sensitive to the environment and listed on the Indonesia Stock Exchange in 2017-2019. The analytical tool used in this research was multiple regression models. Result: The study found a carbon emission disclosure had a significant positive effect on the cost of equity capital. Carbon emission intensity and company size had a significant negative effect on the cost of equity capital. Meanwhile, environmental performance did not have a significant effect on the cost of equity capital. Conclusion: Therefore, the results of this research are expected to provide feedback to the company's stakeholders that environmental performance and carbon emissions are some of the points seen by investors in making investment decisions.

통신해양기상위성 복사방출과 정지궤도 발사체 복사감응과의 전자파 적합성 해석 (The Preliminary EMC Analysis Between the COMS RE and the GEO Launch Vehicles RS)

  • 김의찬;이승민
    • 전기학회논문지
    • /
    • 제59권4호
    • /
    • pp.774-778
    • /
    • 2010
  • In this paper, the preliminary EMC analysis process between the Communication, Ocean and Meteorological Satellite (COMS) and the Geostationary Earth Orbit (GEO) launch vehicles in the frequency range is described. The considered launch vehicles are Arian Ⅴ, Sea Launch, Land Launch, Atlas III&Ⅴ, Delta IV, Proton M/breeze M, Soyuz, H II-Aa. The launch vehicle Radiated Susceptibility (RS) specifications have been compared to COMS satellite Radiated Emission (RE) limits. The COMS Radiated Emission (RE) level is determined by calculating the radiated field equal to the quadratic sum of radiated emissions of each equipment switched "ON" during launch. As a result, The RS requirements of Arian V, Atlas III&V and Delta IV lauchers are compliant with COMS RE limits. The negative margins appear between the others launch vehicle RS (Sea Launch, Land Launch, Proton M/Breeze M, Soyuz and H II-A) and COMS RE. Then, if the launchers that have negative margin were chosen by the customer, The EMC tests should be performed at satellite level in order to demonstrate the compatibility with respect to launch vehicles requirements.

The path analysis of carbon emission reduction: A case study of the Silk Road Economic Belt

  • Kong, Yang;He, Weijun
    • Environmental Engineering Research
    • /
    • 제25권1호
    • /
    • pp.71-79
    • /
    • 2020
  • This paper uses super-efficiency DEA model and Malmquist index to evaluate the carbon emission efficiency (CEE) values of the nine western provinces along the "Silk Road Economic Belt" for the period from 2000 to 2015, and analyses the influencing factors of the CEE. The major findings of this study are the following: (1) the overall CEE of the nine western provinces is not high, and there are significant inter-provincial differences in the CEE. Meanwhile, the provinces with higher levels of economic development generally have higher CEE. (2) The annual total factor productivity (TFP) of the nine western provinces, which is mainly determined by technological change, is greater than 1. Moreover, the total average growth rate of the TFP is 15.5%. (3) The CEE of the nine western provinces is not spatially dependent. In addition, the urbanization, openness, use of energy-saving technologies and research and development (R&D) investment have a significant positive impact on the CEE values, while the industrial structure, foreign direct investment, fixed asset investment, government expenditure levels and energy structure have a significant negative impact on the CEE. Among them, R&D investment is the primary factor in promoting the development of CEE, and the government expenditure has the greatest negative impact on the CEE.

염류용액 방전의 온도 측정에 관한 연구 (A Study on the Temperature Measurement Using Optical Emission in Saline Solution Discharge with Pin to Plate Electrodes)

  • 김중균
    • 조명전기설비학회논문지
    • /
    • 제30권1호
    • /
    • pp.66-71
    • /
    • 2016
  • In this study, electrical and spectroscopic characteristics were investigated in the pin to plate discharge of 0.9% weight per unit volume saline solution. The positive and positive- and negative-going dc pulse with 5% duty ratio were applied to tungsten pin electrode. The more amount of discharge current flew in negative discharge. The temperature, which is considered as a local value in the vicinity of vapor of discharge, was about 3,000K which is much higher than the value recommended to be controlled. It can be suggested that not only the temperature of liquid but also the local temperature of vapor is monitored to investigate damages on tissue or cells in biological application.

ZERO-EMISSION MATERIALS CYCLE IN PRODUCTION PROCESS AND REGIONAL SCALE

  • FUJIE, Koichi
    • 청정기술
    • /
    • 제3권2호
    • /
    • pp.13-24
    • /
    • 1997
  • The present paper aims to give basic information to establish zero emission material cycle including the minimization of emissions from industrial production processes and the area in regional scale. Strategies and methodologies to analyze emissions from the production processes and our human activities and to reduce those emissions by refining and/or replacing the unit process with the alternatives are introduced as well. Quantitative evaluation and management systems of any raw materials and the production process are from vie points of treatment are essential. Estabiishment of a process networking for the recycle of discharged non-products materials by the intra-process, trans-process and the trans-industries are proposed. Procedures and priorities to formulate industrial and regional zero emission system are proposed as well.

  • PDF

Effects of Surface Termination on Directional Emission from Photonic Crystal Waveguides

  • Chung, K.B.
    • Journal of the Optical Society of Korea
    • /
    • 제12권1호
    • /
    • pp.13-18
    • /
    • 2008
  • We numerically investigate by the finite-difference time-domain method the effects of surface termination on directional emission exiting a photonic crystal waveguide. The directed power and far-field beam profile for the original proposal [E. Moreno et al., Phys. Rev. B 69, 121402 (2004)] and its enhancement [S. K. Morrison et al., Appl. Phys. Lett. 86, 081110 (2005)] are computed for different values of some important parameters. We find another surface termination condition with a positive surface displacement in the structure of the original proposal which has a negative surface displacement. Our surface termination is more effective than the original structure, and nearly as effective as the termination for the enhancement, for directional emission. Besides, our termination is simpler than that for the enhancement. We confirm the effectiveness of directional emission from our termination in its far-field beam profile, radiation intensity distribution, and additionally the wave-vector space representation by the Fourier analysis.