• Fibers and Polymers
• /
• v.6 no.4
• /
• pp.313-317
• /
• 2005

The anisotropy in creep behavior of two types of nonwoven fabrics (needle-punched and thermobonded spun laid) has been studied. It has been observed that the amount of time dependent extension depends on the direction, amount of loading and the structure of nonwoven the fabrics. The time dependent extension (creep) for the nonwoven fabric increases with the increase in amount of load. The higher initial extension and creep are observed for needle-punched nonwoven fabric as compared to thermobonded spun-laid nonwoven fabric. The creep behavior of needle-punched nonwoven shows a logarithmic relationship with time, but the thermobonded spun-laid nonwoven fabric does not show such logarithmic relationship. For a particular fabric, the creep is dependent on the fiber arrangement and is minimum in the direction in which the proportion of fiber is maximum and visa versa.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.133-136
• /
• 2001

The effect of pre-carbonization condition on the mechanical properties of nonwoven needle-punched carbon/phenolic composite was studied. The nonwoven Oxi-PAN felt was pre-carbonized at different temperature. The pre-carbonized Oxi-PAN felt was needle-punched and then carbonized. Needle-punched nonwoven carbon preforms were formed into composites with phenol resin. The tensile and flexural strengths showed maximum value with pre-carbonization temperature of $500^{\circ}C$. Compared with the non-pre-carbonized composite, the mechanical properties were slightly improved.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.50-53
• /
• 2000

The effect of punching density on the mechanical and thermal properties of nonwoven needle-punched carbon/phenol composite was studied. The carbonized preforms were farmed into composites with phenol resin. The interlaminar shear, tensile and flexural strengths were increased with increasing punching density. However, excessive punching density decreased interlaminar shear and tensile strengths. Erosion rate of carbon/phenol composite was decreased with increasing punching density

• Proceedings of the Korean Fiber Society Conference
• /
• 1994.10a
• /
• pp.35-37
• /
• 1994

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.402-405
• /
• 1998

Among the production technologies of nonwoven fabrics, a needle punching technique has one of the long history aid holds still important place. At the present time, it is used not only for scrimming with woven or knitted fabrics and other nonwoven fabrics, but also for applying the special fibers blending nonwovens at the web forming process in ender to manufacture economical and high value added-Products such as home furnishing industrial and technical purpose. (omitted)

• Advances in aircraft and spacecraft science
• /
• v.6 no.2
• /
• pp.157-168
• /
• 2019

The production of nonwoven fabrics from natural fibers is already expanding at an industrial level for simple curvature semi-structural part in the automotive industry. To develop their use for technical applications, this paper provides an experimental study of the mechanical behavior of flax-fiber nonwoven preforms. A comparison between different sets of carded needle-punched nonwoven has been used to study the influence of manufacturing parameters such as fibers' directions, the area and the needle punching densities. We have found that the anisotropy observed between both directions can be reduced depending on these parameters. Furthermore, this work investigates the possibility to form double curvature parts such as a hemisphere as well as a more complex shape such as a square box which possesses four triple curvature points. We propose a forming process adapted to the features of the nonwoven structure. The purpose is to determine their behavior under high stress during various forming settings. The preforming tests allowed us to observe in real time the manufacturing defects as well as the high deformability potential of flax nonwoven.

• Proceedings of the Korean Fiber Society Conference
• /
• 1994.10a
• /
• pp.38-39
• /
• 1994

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.267-272
• /
• 2008

The purpose of this study is to improve the environmental applicability of nonwovens by using special composition. Polypropylene spunbonded and needle punched nonwovens which have the lower cost than polyester nonwovens were used as the raw materials to manufacture the natural fiber used nonwoven geotextiles. These geotextiles were made by use of the thermal bonding methods and composed of jute(or flax)/polypropylene staple fiber blends were obtained in consideration of environmental application. Finally, the engineering properties of natural fiber used nonwoven geotextiles were investigated as eco-friendly materials.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.7
• /
• pp.1119-1127
• /
• 2007

Nonwovens have been widely used in various regions from the households to the industrial, agricultural and medical goods. Synthetic fibers have been used for source of nonwovens commonly because of their useful and economic properties. They are not only main factor causing environmental problems but also spend huge cost to renew the environmental disruption by them. Nonwovens must have both cost-competitiveness and environment-friendly property to be the desirable sources in 21th centuries. For meet these needs, it is suitable for the times that economical and environmentally-safe kenaf fibers would be used as raw materials of nonwovens. Kenaf and polyester fibers were blended in 4 types of ratio : 0/100, 20/80, 40/60, 60/40 were needle-punched. The nonwovens properties such as color values, surface appearance, strength, elongations, stiffness, moisture regain, water and oil absorbency, and electrification were tested. As the results, tensile and tear strengths, water and oil absorbency were maximum at 20/80 kenaf/polyester blend nonwoven, because of effecting by nonwoven structure and fiber properties. The moisture regain were increased according to kenaf were blended and the eletrification reduced in proportion to the kenaf fibers by chemical property of fiber composed nonwovens.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.11
• /
• pp.1696-1706
• /
• 2009

Nonwoven fabrics have been widely used in various fields that include household, industrial, agricultural, medical goods, especially in the automobile industry. In this study, eco-friendly fiber materials were developed and investigated as a substitute material for polyester fibers in nonwovens. To make plant fiber bundles, stems of Indian mallow (IM), and Kuzu vine (KV) were retted; in addition, the non-cellulose component was partially removed. Plant fiber bundles and polyester fibers (P) were blended and needle punched to produce nonwovens. Five kinds of nonwovens were manufactured: P100 (Polyester 100%), IM10 (IM 10% and Polyester 90%), IM20 (IM 20% and Polyester 80%), KV10 (KV 10% and Polyester 90%), and KV20 (KV 20% and Polyester 80%). The color values, surface appearance, tensile strength, elongation, tear strength, abrasion strength, flexstiffness, moisture regain, water or oil absorbency, and static electricity of manufactured nonwovens are investigated. As the blended ratios of IM or KV increased, the brightness of nonwovens decreased compared to that of polyester 100%. Tensile strength, tear strength, abrasion strength, and flexstiffness of IM10 as well as KV10 were higher than those of P100, IM20, and KV20, resulting from the influence of the structure and properties of nonwoven fibers. Moisture regain and water or oil absorbency increased, while static electricity decreased in proportion to the amount of plant fibers. IM or KV and polyester blended nonwovens showed improved properties over P100 that could be substituted for P100 as a novel material for textiles.