• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.6
• /
• pp.745-752
• /
• 2003

Injection technology is one of the important technologies in a diesel engine. Many studies have done on the injection system. In this study, the fuel chamber geometry, the orifice ratio and the needle lift of the injection valve of a diesel engine for generating electricity are varied and tested. The injection pressure, duration and spray shapes are produced with pressure transducer, needle lift sensor and highspeed camera. The result shows that the nozzle hole size has influence on the rail pressure and injection duration sensuously.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.414-417
• /
• 1998

Needle punching is a process for converting fiber webs into coherent structures by using barb needles. The results are the mechanical interlocking of fibers into webs. Nonwovens by needle punching is most versatile among the various methods and is widely used in the industry. The original process for the production of mechanical bonds in nonwoven fabrics is that which employs the natural felting characteristics of the wool fiber. (omitted)

• The Journal of Korean Medicine
• /
• v.23 no.4
• /
• pp.27-31
• /
• 2002

Background and Purpose: There has been little study about the quality of acupuncture needle tips. In order to ensure safe acupuncture treatment, high quality of needle tips is essential. Therefore, we investigated the current condition of the tips of the acupuncture needles on the market. Methods: We selected needles made by 6 companies in Korea, one company each in Japan, the USA and China, and observed the tip of each needle using a scanning electron microscope. Results and Discussion: We found that needles had several defects such as scratch marks on the surface, metallic scuff, lumps and irregularities of the needle tips, stubbed or malformed tips, tips of point off-center, and peeled off coated tips. There were more faulty ones than good ones. Further, better-designed study with a bigger sample size is warranted.

• Korean journal of food and cookery science
• /
• v.28 no.5
• /
• pp.613-622
• /
• 2012

To develop the tailor made rice flour products for consumers with increasing functionality of pine needles, rice cupcakes were prepared with adding different contents of pine needle powder (PP) and extract (PE, by pressing pine needle). The physicochemical, textural, sensory properties, and antioxidative activities of rice cupcakes were investigated. The antioxidative activities of rice cupcakes with PP and PE were higher than those of the control and were significantly different with adding pine needle type (PP or PE). The specific volume of rice cupcakes increased with adding PP and PE, except for 10 g PP added cupcake. Textural properties were also significantly different with pine needle types and contents. On the sensory preference test data, the scores of the teens, the twenties, and the thirties were higher in PP added rice cupcakes (3 and 5 g added), but those in the forties, the fifties, and above the sixties were higher in PE added rice cupcakes (3 g added). From these above results, the PP addition improved the processing quality of rice cupcakes (under 10 g added), but reduced unique flavor of pine needle. It was suggested that rice products added with pine needle would be developed to consider consumer's age, type of pine needle and its content.

• The Korean Journal of Food And Nutrition
• /
• v.35 no.4
• /
• pp.253-258
• /
• 2022

An increasing trend embracing the 2030 generation mindset through the new word 'newtro', which means reinterpreting the past and selling it in the present, has been gaining traction. The 2030 generation who seek new experiences and desserts is growing. The unique dessert market is expected to continue to grow in the future. Thus, this study devised a pine needle madeleine. Madeleines were made by varying the proportions of pine needle powder added to 0%, 1%, 3%, 5%, and 7%, and specific gravity, moisture, color, physical properties, and antioxidant properties were measured. The L-value decreased significantly (p<0.001) as the amount of pine needle powder added increased, and the a-value increased (p<0.001). The total polyphenol content, DPPH, and ABTS gradually increased significantly (p<0.001). Through this study, it was possible to confirm the quality and characteristics of madeleines using pine needle powder, which has excellent antioxidant properties, and it will become basic data for the development of various desserts using pine needle powder.

• Korean Journal of Acupuncture
• /
• v.40 no.4
• /
• pp.206-211
• /
• 2023

Objectives : Needle sickness is one of the adverse events of acupuncture, although substantial adverse effects during a routine acupuncture treatment seem to be highly unusual. In this work, we propose that an acupuncture-related vasovagal response resembles needle sickness during acupuncture therapy. Methods : In this article, we discussed the general characteristics of vasovagal syncope and went into more detail on vasovagal syncope in people who have a fear of blood injection and injury. We also offer a recommendation for the prevention and management of vasovagal syncope brought on by acupuncture. Results : The vasovagal reaction related to acupuncture is closely associated with needle sickness. The prevention can be done using PEACHES (position, experience, anxiety, constitution, hydration, environment, symptom recognition) principles. The management should be conducted using the RIPCORD (recognize, initiate, position, communicate, order treatments, reassess, document) techniques. Conclusions : It is important to comprehend the characteristics of needle sickness as a vasovagal reaction related to acupuncture. According to the recommendation, practitioners should effectively prevent and manage needle sickness.

• Journal of ILASS-Korea
• /
• v.28 no.4
• /
• pp.169-175
• /
• 2023

Multi-injection scheme is being applied to GDI combustion to reduce PM and PN emission to meet the EU7 regulation. However, very short injection duration encounters the ballistic injection region, which injection quantity does not increase linearly with injection duration when applying multi-injection. In this study, numerical studies were conducted to reveal the cause of ballistic injection and the effect of design parameters on ballistic region using 1-D simulation, AMESim. Injection rate and injection quantity were compared with experiment to validate the established model, which showed the accuracy with 10% error. The model revealed that the tendency of ballistic region coincides with the needle motion behavior, which means that parameters at the upper part of needle such as electro-magnetic force, needle spring force and needle friction force have dominant effect on ballistic injection. To figure out the effect of electro-magnetic and needle friction force on ballistic, those parameters were varied to plus and minus 10% with model. The result showed that those parameters clearly changed the ballistic region characteristics, however, the impact became insignificant for outside of ballistic region, which means that the ballistic injection is mainly influenced by initial motion of injector needle.

• Journal of ILASS-Korea
• /
• v.22 no.4
• /
• pp.210-217
• /
• 2017

A gasoline direct injection engine has an intake air temperature can be lowered by the fuel vaporization in the combustion chamber increase the volume efficiency is high compression ratio. Therefore, study for injection rate and characteristics which influence mixture formation in combustion chamber is important. Movement of the injector needle has a direct effect on the injection of the fuel, such as formation of cavitation, the fuel injection rate, etc. Therefore, recent studies on the dynamic characteristics of the injector considering the movement of the needle have been reported, but it takes a lot of time and cost to experimentally confirm the movement of the needle inside the injector. In this study, AMESim, a commercial 1-D code, and Star-CCM+, a 3-D CFD code, were used to predict the dynamic performance of the injector with needle motion. In order to predict the movement of the needle under the high pressure, the result of the surface pressure distribution according to the movement of the needle was derived by using the morphing technique of flow analysis. In addition, we predicted the injection rate of the injector considering the movement of the needle in conjunction with the 1-D code. The injection rate of the injector was measured by the BOSCH's method and the results were similar to those of the simulation results. This method can predict the injection rate and injection characteristics and this result is expected to be used to predict the performance of gasoline direct injection engines with low cost and time in the future.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.171-175
• /
• 1998

This study was to estimate the strength of pine needle ash concrete using cement, natural aggregates and pine needle ash(PNA). The highest strength was achieved by 5% pine needle ash filled PNA concrete respectively. It was increased 6% by compressive strength, 15% by tensile strength and 13% by bending strength than that of the normal cement concrete, respectively.

• Korean Journal of Poultry Science
• /
• v.38 no.1
• /
• pp.51-57
• /
• 2011

This study was conducted to investigate the effects of supplementation diets of pine needle powder on performance, proximate composition, carcass characteristics, blood cholesterol concentration, TBARS (thiobarbituric acid reactive substance), WHC (water holding capacity), and shear force of chicken meat. Broiler chicks were fed diets for five weeks containing 0% pine needle powder (Control), 0.3% pine needle powder (T1), 0.6% pine needle powder (T2), and 0.9% pine needle powder (T3). Performance was no significant difference among treatment groups, but mortality was decreased in diets by the supplementation of pine needle powder than that of T1 and control. The moisture, crude protein, crude fat, and crude ash were no significant difference. The liver weight and abdominal fat was significantly decreased by the supplementation of pine needle powder compare to the T1 and control (P<0.05). The total cholesterol and LDL-cholesterol concentration of control was higher than treatment groups, and the HDL-cholesterol concentration and glucose of control was lower than treatment groups (P<0.05). The TBARS value was significantly decreased by the supplementation of pine needle compared to the control (P<0.05). In conclusion, these data indicate that 0.6% pine needle powder supplementation (T2) was most effective in decreasing mortality, total cholesterol and LDL-cholesterol and increasing HDL-cholesterol concentration.