• Clinics in Shoulder and Elbow
• /
• 제6권2호
• /
• pp.149-160
• /
• 2003

Purpose: to determine the results after open intramedullary nailing and tension band suture technique in proximal humerus fracture for improving the stability and decreasing the complications. Materials and Method: Authors reviewed 27 patients treated by open intramedullary nailing and tension band suture technique. Mean follow-up period was 39 months (24-59months). Surgical neck fracture were 6 cases, surgical neck fracture with shaft fracture were 3 cases, three part fracture with greater tuberosity fracture were 17 cases, four part fracture was 1 case and fracture and dislocation were 2 cases Results: We got the bony union in 26 cases. Average pain scale was 1 point (0-6), Neer score was 86 point(45-99) and ASES score was 85 point(40-100). We separate all cases in two groups based on age (65 years), L-spine t-score (-2.5) and Neer classification (2 and 3 part). There is no significance in pain scale, Neer score and ASES score between each group. Conclusion: As a method of surgical treatment on severe proximal humeral fractures, we recommend intramedullary nailing and tension band suture technique and it may have particular advantages in early exercise and satisfactory functional outcome.

• Asian-Australasian Journal of Animal Sciences
• /
• 제3권2호
• /
• pp.97-102
• /
• 1990

A procedure to standardize camel carcass fabrication is proposed. This includes a definitive method of jointing the carcass into wholesale neck, shoulder, brisket, rib, plate, loin, flank, rump and leg cuts. Carcass cutout data were collected from the right sides of 21 Najdi male camels averaging 8, 16 and 26 months of age in order to determine the influence of age on the weight of each wholesale cut. The weight of body, empty body, hot carcass, cold carcass, hump fat, kidney, pelvic and heart fat (KPH) and each wholesale cut increased (p < .01) with age. Except for percent shrinkage and wholesale rump weight, all studied traits increased (p < .01) linearly as the age increased. This change was most pronounced in wholesale flank and plate cuts, increasing by 4.2 and 3.4 times, respectively, while the rump and shoulder cuts changed the least, increasing by 1.8 and 1.9 times, respectively. Allometric growth coefficients indicated that as the camel grew, the weight of rib, brisket, plate and flank cuts increased relatively more rapidly than did cold carcass or empty body weight and that the weight of wholesale shoulder, neck, leg and rump increased less rapidly than did cold carcass or empty body weight.

• Asian-Australasian Journal of Animal Sciences
• /
• 제3권3호
• /
• pp.155-159
• /
• 1990

The growth of lean from nine wholesale cuts in relation to the total lean weight in carcass side were evaluated with three allometric equations for 18 Najdi male camels slaughtered at 8, 16 and 26 months of age. The allometric growth coefficients indicated that as the camels grew, weights of lean form brisket and flank cuts increased relatively more rapidly than the total lean in carcass side (${\beta}$ >1.1) and that weights of lean from wholesale shoulder and rump cuts increased relatively less rapidly (${\beta}$ <.9) than the total lean weight from carcass side. The growth coefficients for the lean in the thoracic limb and pelvic limb showed a dorsoventral rise in the growth impetus, with coefficients for the thoracic limb correspondingly higher than those of pelvic limb. The growth coefficients for the lean from shoulder, rib, flank and leg cuts increased (p<.01) with increased weight of total lean in carcass side, whereas it decreased with increased total lean weight in carcass side for the lean in neck, brisket, plate, loin and rump cuts. At a constant weight of total lean in carcass side, older camels had larger coefficients for lean in neck, brisket, rump, flank and leg cuts, but had smaller coefficients for lean in shoulder, rib, plate and loin cuts.

• 국제물리치료학회지
• /
• 제9권2호
• /
• pp.1498-1507
• /
• 2018

The purpose of this study was to examine the immediate effect of neck stabilization exercise and Swiss ball exercise on the recovery from the fatigue of neck muscles induced. The turtleneck posture was set artificially by using Smartphone with healthy adults. Repetitively measured ANOVA was executed to examine the changes in the muscle fatigue of sternocleidomastoid, upper trapezius, and splenius capitis among three-time intervals (at the time of general resting, work and after intervention) in the three intervention groups (neck stabilization exercise group, Swiss ball exercise group, and ordinary rest group). There were no significant differences in the changes of fatigue of sternocleidomastoid muscle among all three intervention groups at the time of general resting, work and after intervention (p>.05). Although there was no significant difference in the changes in the fatigue of upper trapezius and splenius capitis muscles between the intervention groups at the time of general resting and work (p>.05), there was the significant difference between the three intervention groups at the time of work and after intervention (p>.05). This study suggest that Swiss ball exercise is more effective in reducing the muscular fatigue of the neck and shoulder at a turtleneck posture than neck stabilization exercise.

• 대한가정학회지
• /
• 제8권1호
• /
• pp.21-35
• /
• 1970

1. For the purpose of making the basic pattern construction 100 girls attending the Seoul National University College of Home Economics were measured in finding of body size and coefficient of correlation which would be used as one basis of this study. 2. Coefficient of correlation of each body part based on the breast width was shown as follows; Correlation coefficients of bust to waist and hip were high and those of bust to shoulder width, neck height, back width, and breast width were low. None of that was found between bust and back length. It was not recognized so scientific to adjust the basic pattern construction with figures proportioned by those of neck, shoulder width, breast width, and back width. 3. The method of basic pattern construction obtained by this research has been demonstrated in direct wearing since 1967. It is believed that the result will contribute a great benefit in teaching clothing as well as in mass production industry of ready-made garments.

• 패션비즈니스
• /
• 제21권1호
• /
• pp.74-87
• /
• 2017

The aim of this study was to analyze the features of bodice patterns modeled using a dress form that represents Korean female fashion models' body features. A controlled experiment was carried out using an existing dress form that has been frequently used in South Korea. The purpose of the study was to suggest notable findings derived from understanding the development of bodice patterns for Korean female fashion models. The comparison of features of bodice patterns from the developed and existing dress forms was carried out with consideration of the upper body features of the developed dress form, such as body angles and body cross-sectional shapes. The following results were derived from the investigations. (1) The angles of the upper and lower breast cups of the developed dress form differed to those of the existing dress form, showing a 5.0cm smaller front shoulder dart and a 3.5 larger ㎝ ㎝ front waist dart within the bodice patterns. (2) The body angle features of the developed dress form included a straighter neck and shoulder blade and more concave center back than the existing dress form, with a 2.0 reduced back neck height and a 4.8 larger back waist dart for ㎝ ㎝ the bodice back panel. The more realistic body angles of the developed dress form anticipate the improvement of garment pattern-making. (3) The altered shoulder angles resulted in an increased size of the back shoulder dart and a decreased size of the front shoulder height within the bodice patterns. (4) The increased rate of curvature of cross-sectional shapes on the bust and waist circumferences of the developed dress form resulted in an increase in the sizes of the front and back waist darts.

• Safety and Health at Work
• /
• 제1권1호
• /
• pp.37-42
• /
• 2010

Over years it has been increasingly concerned with how upper extremity musculoskeletal disorders (UEMSDs) are attributed to psychosocial job stressors. A review study was conducted to examine associations between UEMSDs and psychosocial work factors, and to recommend what to consider for the associations. For studies in which the job demand-control-support (DCS) model or its variables were specifically employed, published papers were selected and reviewed. A number of studies have reported relationships between UEMSDs symptoms and psychosocial exposure variables. For example, the findings are: higher numbness in the upper extremity was significantly attributed to by less decision latitude at work; work demands were significantly associated with neck and shoulder symptoms while control over time was associated with neck symptoms; and the combination of high psychosocial demands and low decision latitude was a significant predictor for shoulder and neck pain in a female working population. Sources of bias, such as interaction or study design, were discussed. UEMSDs were shown to be associated with psychosocial work factors in various studies where the job DCS model was addressed. Nonetheless, this review suggests that further studies should be conducted to much more clarify the association between UEMSDs and psychosocial factors.

• Clinics in Shoulder and Elbow
• /
• 제18권4호
• /
• pp.248-253
• /
• 2015

Background: Scapular notching can happen at diverse location depending on implant design or operative technique, therefore, it is easily misdiagnosed. Thus, this study purposed to suggest a method helpful to assess scapular notching. Methods: The subjects were 73 cases of reverse shoulder arthroplasty (RSA) for cuff tear arthropathy during the period from May 2009 to April 2014 and followed-up for over a year. There was medialized RSA in 22 cases, bone increased offset RSA (BIO-RSA) in 36 cases, and metal increased offset RSA (metal-RSA) in 15 cases. Scapular notching was not determined by bone defect at the inferior of glenosphere as Sirveaux's classification, but scapular notching at the site where the rotational route of the polyethylene of humeral implant met the scapular neck were examined. The results were compared with conventional method. Results: By conventional method, scapular notching was observed in 10 cases (45.5%) in medialized RSA, 12 cases (33.3%) in BIO-RSA, and none in metal-RSA. By new method, it was observed in 9 cases (40.9%) in medialized RSA, 10 cases (27.8%) in BIO-RSA, and none of metal-RSA. The site of scapular notching was apart from glenoshpere in 18 cases, and at inferior of glenosphere in 1 case. Absorption of bone graft was observed in 4 (11.1%) out of 36 cases of BIO-RSA. Conclusions: It is hard to distinguish scapular notching from absorption of bone graft in BIO-RSA, and bone absorption at the lateral lower end of glenoid in medialized RSA. Thus, it is considered useful to assess scapular notching at the site where the rotational route of the polyethylene insert meets scapular neck.

• 한국생활과학회지
• /
• 제20권1호
• /
• pp.169-182
• /
• 2011

The purpose of this study was to research the purchasing patterns and the ease amount of woman's T-shirts. For the study, 215 women between the ages of 18 and 59 were surveyed. 18~34 year old women had more T-shirts and wore them more frequently than 35~59 year old women. Women usually gave weight to design, fabric, fit and color, when they bought T-shirts. The most important fit part was different according to age groups, 18~34 women valued T-shirts length but 35~59 women valued bust circumference ease. The ease of T-shirts was analysed with body sizes. Shoulder ease were distributed between -3~3cm, neckline designed apart 0.5~7.0cm from side neck point, 0~11cm from front neck point and 1~2cm from back neck point. The means of bust ease, waist ease and hip ease were 6.2cm, 14.7cm and 4.5cm. The bust and waist ease were significantly different between age groups and 35~59 year old women wore more tightly at both parts due to their thick torso. Women accepted smaller ease at hip while didn't want small ease at waist. The eases of shoulder, bust and T-shirts length were the most important and influencing.

• Clinics in Shoulder and Elbow
• /
• 제24권4호
• /
• pp.239-244
• /
• 2021

Background: Radial neck fracture in children is rare. This study attempted to evaluate the outcome of surgically treated patients and any associated complications. Methods: This study evaluated 23 children under 15 years of age with radial neck fracture who were treated with open reduction between 2006 and 2016 to determine their range of motion, postoperative complications, and radiographic outcomes. The results were assessed clinically using the Mayo clinic elbow performance score. Results: The mean follow-up duration for patients was 34.6 months. The average postoperative angulation was 3.6°. Hypoesthesia was reported in only 9% of patients, and none of the patients complained of postoperative pain. The postoperative X-ray results were excellent in 60% and good in 40%. No radiographic complications were identified. The elbow score was excellent in 87% and good in 13% (mean score, 96.74). There was a statistical relationship between range of motion limitations and age, degree of fracture, initial displacement, and surgical pin removal time. Conclusions: Although most patients accept the closed reduction method as a primary treatment, the present study suggests that an open-reduction approach has been associated with optimal therapeutic outcomes for patients in whom closed reduction was not satisfactory or indicated.