• Animal Systematics, Evolution and Diversity
• /
• 제35권2호
• /
• pp.91-94
• /
• 2019

An asteroid specimen was collected by using a fishing net from the waters near Daejin harbor, in the East Sea of Korea on 3 Mar 2017. Based on morphological characteristics, the specimen was identified as Aleutihenricia beringiana (Djakonov, 1950), belonging to the family Echinasteridae, of the order Spinulosida. The genus Aleutihenricia was first described by Clark and Jewett, 2010. This species can be distinguished from other Aleutihenricia species by having a roundish protruding shape of abactinal and actinal plates, the number of abactinal spines bearing three to eight spinelets, and the number of adambulacral spines comprising six to eight spinelets. This is the first report of the genus Aleutihenricia and A. beringiana in Korea.

• 한국주조공학회지
• /
• 제31권1호
• /
• pp.26-30
• /
• 2011

For the fabrication of bulk near-net-shape Ti-Ni-Cu shape memory alloys, consolidation of Ti-Ni-Cu alloy powders are useful because of their brittle property. In the present study, $Ti_{50}Ni_{30}Cu_{20}$ shape memory alloy powders were prepared by gas atomization and martensitic transformation temperatures and microstructures of those powders were investigated as a function of powder size. The size distribution of the powders was measured by conventional sieving, and sieved powders with the specific size range of 25 to $150\;{\mu}m$ were chosen for this examination. XRD analysis showed that the B2-B19 martensitic transformation occurred in the powders. In DSC curves of the as-atomized $Ti_{50}Ni_{30}Cu_{20}$ powders as a function of powder size, only one clear peak was found on each cooling and heating curve. The martensitic transformation start temperature($M_s$) of the $25-50\;{\mu}m$ powders was $31.5^{\circ}C$. The $M_s$ increased with increasing powder size and the difference of $M_s$ between $25-50\;{\mu}m$ powders and $100-150\;{\mu}m$ powders is only $1^{\circ}C$. The typical microstructure of the rapidly solidified powders showed cellular morphology and very small pores were observed in intercellular regions.

• 수산해양기술연구
• /
• 제56권3호
• /
• pp.223-229
• /
• 2020

We analyzed the cutting mechanism of laver harvesting machine in the sea area near Gooam Port in Goheung, Jeollanam-do, and investigated the change and efficiency of laver collecting operation in the working ship. The laver working ship slides uniformly from the bow to the upper part of the laver collecting machine on the deck and cuts the wet laver attached to the bottom of the net at the blade of the havesting machine. The laver farming net, which was loaded with laver turrets on the deck by gravity and collected primitives, consisted of a ship structure that led to the stern side and into the sea. The working ship operation is in harvesting process while driving in a S-shape that is separated by one space to efficiently collect the laver net. During laver working ship operation, the speed was 0.51 m/s in the access stage, 0.56 m/s in the havesting stage, and 0.52 m/s in the exit stage. Considering the cutting edge life and production efficiency of the laver harvesting machine, it is appropriate to harvest 1.15 to 1.26 kg/rpm by operating at a rotational speed of about 700 to 800 rpm rather than forcibly harvesting the product at high speed. On the deck of the working ship, 959.7 kg of starboard and 1048.7 kg of center were 964.7 kg of port side. Based on the starboard, 9.3% of the central part and 0.5% of the port side appeared. The reason for this was due to the difference in harvest time according to the turning direction of the working ship.

• 설비공학논문집
• /
• 제17권6호
• /
• pp.544-551
• /
• 2005

The flow characteristics have been numerically investigated for various shapes of the diffuser/nozzles which are used for a valveless micro-pump. The important parameters considered in this study are the throat width ($15\~120\mu$m), the taper angle ($3.15\~25.2^{\circ}$), and the diffuser length ( $600\~4,800\mu$m), and the size of the middle chamber ($1\~16mm^2$). To find the optimal values for these parameters, steady state calculations have been performed assuming the constant pressure difference between the inlet and exit of the flow For the taper angle and the throat width, it is found that there exists an optimum at which the net flow rate is the greatest. The optimal taper angle is in the range of $10\~20^{\circ}$ for all the pressure differences; and the throat width indicates an optimal value near $75\mu$m for the case of 35 kPa pressure difference. The net flow rate is also influenced by the size of the middle chamber. With decreasing chamber size, the net flow rate is reduced because of the interference between two streams flowing into the middle chamber. The unsteady pulsating flow characteristics for a micro-pump with a given diffuser/nozzle shape have been also investigated to show the validity of the steady state parametric study.

• 한국자기학회지
• /
• 제13권4호
• /
• pp.182-186
• /
• 2003

펄스자장종축성형법(pulse die press, PDP)을 이용하여 32 wt%RE-67 wt%TM-1 wt%B(RE: 희토류원소, TM: 30천이금속)조성을 갖는 소결자석을 제조함에 있어서 자장성형시 분말의 탭밀도, 성형밀도, 인가자장세기 및 인가방법의 변화에 따라 얻어지는 자석의 배향율과 감자곡선상의 각형성 변화를 조사하였다. 출발합금 제조방법으로서 strip casting process에 의하여 $\alpha$-Fe 편석없이 미세하고 균일한 조직을 갖는 합금 flake가 얻어졌고, 합금 flake를 수소처리한 후 고압가스를 이용한 건식분쇄방법(jet mill)에 의하여 평균입도, 표준편차가 각각 3.65 $\mu\textrm{m}$, 1.39인 미세하고 균일한 입도의 분말로 제조하였다. 제조된 분말은 30-50 kOe치 고펄스자장에 의하여 분말을 배향시키고 동일한 펄스자장을 인가하면서 종축성형을 실시함으로써 배향율을 향상시킬 수 있었다. 결과적으로 32 wt%RE조성의 분말을 이용하여 종전의 자장성형방법인 TDP(transverse die press)와 본 연구에서 제안된 PDP에 의하여 제조된 자석의 최대자기에너지적은 각각 42.0 MGOe 및 44.8 MGOe가 얻어져, PDP가 분말의 배향율과 감자곡선상의 각 형성을 향상시키는데 효과적인 자장성형방법임을 알 수 있었다.

• Composites Research
• /
• 제32권1호
• /
• pp.65-70
• /
• 2019

항공기 복합재료 날개 구조는 대부분 접착 혹은 패스너로 체결되어 있는데, 이러한 적층 구조 복합재료는 층간 강도가 취약하여 층간 분리가 일어나기 쉽다. 이러한 적층 복합재료의 단점을 보완하기 위해 두께 방향의 섬유를 보강한 3차원 직조형 복합재료를 통하여 강도, 손상 내구성, 충격 및 피로 하중을 향상시킬 수 있다. 또한, 자동화된 직조 공정에 의하여 단일 구조 near-net-shape의 프리폼 제조가 가능하기 때문에 공정 단축, 체결 부품 감소로 복합재료 전체 가격을 절감할 수 있다. 따라서 본 연구에서는 3차원 직조형 복합재료의 항공기 구조물 적용 가능성을 확인하기 위하여 3차원 프리폼의 기본적인 구조인 orthogonal(ORT), layer-to-layer(LTL), through-the-thickness(TTT) 패턴을 직조하고 이를 복합재료로 성형하여 압축 시험, 인장 시험, Open-hole 인장 시험을 하였다. 이 중 orthogonal 직조 복합재료가 인장 및 압축 탄성계수와 강도 모두 가장 높았으며 노치 민감도에서도 orthogonal 복합재료가 일방향 적층복합재료나 패브릭 적층 복합재료에 비하여 가장 우수한 특성을 보였다.

• 소성∙가공
• /
• 제12권1호
• /
• pp.60-65
• /
• 2003

HIP diffusion bonding of Ni-based superalloys, cast Mar-M247 (MM247) and Udimet 720 (U720) powder, was experimentally and numerically studied. Subsolvus HIP treatment was optimized by investigating the variations of high temperature tensile properties of HIP-bonded specimens with powder size, HIP'ing time, etc. While the tensile strength at high temperatures showed no detectable changes, the tensile elongation and reduction in area were slightly increased as the powder size decreased from -140 mesh to -270 mesh. While as-HIP'ed U720 showed a high tensile strength comparable to that of lorded U720 alloy, the HIP diffusion-bonded specimen showed a strength lower than the forged U720 alloy and the cast MM247 alloy The increase of HIP'ing tune from 2 hours to 3 hours resulted in a rapid risc of tensile strength and elongation due to the disappearence of microvoids in the cast MM247. FEM simulation for HIP process was conducted by applying the McMeeking micromechanical model, which uses power-law creep model as constitutive equations. ABAQUS user subroutine CREEP with an implemented microscopic model was used for the simulation. Numerical simulation was shown to be essential for the near-net shape manufacturing as well as the HIP process optimization.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2954-2966
• /
• 1994

The characteristics and good corrosion resistance at room and elevated temperatures led to increasing application of Ti-alloys such as aircraft, jet engine, turbine wheels. In forging of Ti-alloy at high temperature, die chilling and die speed should be carefully controlled because the flow stress of Ti-alloy is sensitive to temperature, strain and strain-rate. In this study, the forging of turbine disk was numerically simulated by the finite element method for hot-die forging process and isothermal forging process, respectively. The effects of the temperature changes, the die speed and the friction factor were examined. Also, local variation of process parameters, such as temperature, strain and strain-rate were traced during the simulation. It was shown that the isothermal forging with low friction condition produced defect-free disk under low forging load. Consequently, the simulational information will help industrial workers develope the forging of Ti-alloys including 'preform design' and 'processing condition design'. It is also expected that the simulation method can be used in CAE of near net-shape forging.

• 한국주조공학회지
• /
• 제18권6호
• /
• pp.570-577
• /
• 1998

An investigation has been conducted to describe solidification characteristics in Sn-Zn binary system and Sn-Zn-Ag ternary system added by Ag produced by the continuous casting process using heated mold as a basic study for developing Pb-free solder materials. To obtain the continuous casting rods with mirror surface and near net shape at higher casting speed, water flow rates must be increased and mold temperature must be lowered. However, surface tearing in the casting rods occured at lower continuous casting speed while break out occured at higher continuous casting speed even if optimum conditions such as water flow rate and heated mold temperature are determined. Primary ${\alpha}Sn$ and eutectic structure in unidirectioally solidified Sn-Zn alloys were finer with increased casting speed. But, directionality may not be expected for primary Zn in hypereutectic Sn-Zn alloy. It was found that the addition of $0.2{\sim}0.8%$ Ag promoted the growth of primary ${\alpha}Sn$ dendrites. The changes of tensile strength and elongation in Sn-Zn binary alloys were not observed while the increase of tensile strength and the decrease of elongation in Sn-Zn-Ag ternary alloys were observed with increased casting speed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.199-202
• /
• 1999

Many processing times for fabricating complex shaped parts by near net shape process such as thixoforming or semi-solid forming, are required due to the time for die design, induction heating and forming process. Therefore, for the thixoforming process, multi-capacity induction heating process is very important due to the reduction of the processing time and cost. It is indispensable to adopt a power-time heating pattern which manages to conciliate complete eutectic melting at the core with limited overheating at the periphery. The total reheating time is thus dependent on billet diameter; in inches$(pm20%)$. Typically, high frequency is used for the rapid reheating of the billet to the eutectic temperature range and low frequency for the remelting of the desired fraction of liquid and for the radial homogeneization of the liquid fraction. So in this study, the multi-capacity induction heating conditions of ALTHIX 86s alloy to reduce the processing time and cost would be proposed. The suitability of multi-capacity induction heating conditions would be verified through the comparison to Garat's data.