• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권4호
• /
• pp.374-385
• /
• 2012

The indoor noise of a ship is usually determined using the A-weighted sound pressure level. However, in order to better understand this phenomenon, evaluation parameters that more accurately reflect the human sense of hearing are required. To find the level of the satisfaction index of the noise inside a naval vessel such as "Loudness" and "Annoyance", psycho-acoustic evaluation of various sound recordings from the naval vessel was performed in a laboratory. The objective of this paper is to develop a single index of "Loudness" and "Annoyance" for noise inside a naval vessel according to a psycho-acoustic evaluation by using psychological responses such as Noise Rating (NR), Noise Criterion (NC), Room Criterion (RC), Preferred Speech Interference Level (PSIL) and loudness level. Additionally, in order to determine a single index of satisfaction for noise such as "Loudness" and "Annoyance", with respect to a human's sense of hearing, a back-propagation neural network is applied.

• 한국CDE학회논문집
• /
• 제19권4호
• /
• pp.410-422
• /
• 2014

Unlike other weapon systems, a naval vessel has unique characteristics in that the vessel itself is a naval unit. In limited space, compartments with various objectives and characteristics need to be arranged, so that vessel performance is maximized. This paper studied a compartment arrangement algorithm that considers activity relationships among compartments and survivability of a vessel. Based on the study, a compartment arrangement application is developed that can generate various layout alternatives swiftly. The application developed in this study aims at automating a two dimensional compartment layout problem. A combinatorial optimization is performed with the differential evolution algorithm to achieve the optimized layout.

• 한국소음진동공학회논문집
• /
• 제21권7호
• /
• pp.650-656
• /
• 2011

The noise inside a naval vessel is very important in considering the need for hearing protection, improving the working environment and maintaining good communications for crews living on board a naval vessel. The indoor noise of a ship usually is specified by the A-weighted sound pressure level, but other evaluating parameters are required to reflect human senses more effectively. This paper uses additional noise indices related to room acoustics, such as NR(noise rating), NC(noise criterion), RC(room criterion), PSIL(preferred speech interference level) and loudness level to evaluate the noise inside cabins on a naval vessel. Using these psychological noise indices, allowable limit of noise level in cabins is suggested through psycho-acoustic evaluation for the noise in cabins.

• 한국군사과학기술학회지
• /
• 제15권4호
• /
• pp.390-397
• /
• 2012

According to sailing condition, an exciting force for luminairie of naval vessels was measured and analyzed. A naval combat service support boat and P${\bigcirc}{\bigcirc}$(patrol killer guided missile) were selected as a target naval vessel. Due to their small size and fast speed, they received excessive vibration than other bigger naval vessels like destroyer. The vibration of luminairie was measured on their cruising and maximum speed. This could analyze exciting force for luminairie of naval vessels. Using this analyzed data, the validity of military standard for naval vessel was verified.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권1호
• /
• pp.98-118
• /
• 2014

An auto weather-vaning system for a Dynamic Positioning (DP) vessel is proposed. When a DP vessel is operating, its position keeping is hindered by ocean environmental disturbances which include the ocean current, wave and wind. Generally, most ocean vessels have a longitudinal length that is larger than the transverse width. The largest load acts on the DP vessel by ocean disturbances, when the disturbances are incoming in the transverse direction. Weather-vaning is the concept of making the heading angle of the DP vessel head toward (or sway from) the disturbance direction. This enables the DP vessel to not only perform marine operations stably and safely, but also to maintain its position with minimum control forces (surge & sway components). To implement auto weather-vaning, a nonlinear controller and a disturbance observer are used. The disturbance observer transforms a real plant to the nominal model without disturbance to enhance the control performance. And the nonlinear controller deals with the kinematic nonlinearity. The auto weather-vaning system is completed by adding a weather-vaning algorithm to disturbance based controller. Numerical simulations of a semi-submersible type vessel were performed for the validation. The results show that the proposed method enables a DP vessel to maintain its position with minimum control force.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1693-1699
• /
• 2011

In this paper, for magnetic silence technology of naval vessel, is to make lab deperm system and to evaluate the deperm capacity of naval vessel regarding deperm protocol. Initial permanent magnetic field of naval vessel is magnetized before deperm, having the magnetic field of the same size, to evaluate the deperm capacity regarding a variety of deperm protocol for experimental reliability growth. Current dead time effect of deperm protocol is measured at the different initial current, which are 8A, 6A and 4A respectively. Furthermore, the experiment under the same condition except changing duty cycle into 50% is carried out. As a result, it is possible to compare the six different experiment outcomes. The result shows that the experiment with dead time improve the deperm capacity more than 48.51 percent comparing to the case without dead time.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.214-215
• /
• 2005

Naval equipments are installed and used for naval vessel with different environmental conditions comparing to the commercial vessel, for example, high engine power per ship displacement size, severe vibration and shock due to high running speed and explosion from naval gun's bombardment and underwater weapons. Therefore, those equipments must be installed on shipboard with small spaces, high ambient temperature around engine room and which are required be fabricated with high resistances of vibration, shock and heat resources. But in case of commercial vessel, the performances of their recent equipments naval have been improved continuously due to the technology development of domestic shipbuilding and shipboard equipment industries, together with the related fundamental industries i.e, metal, steel and electronic industries, to an international level since 1970. With these results, it became possible to unify the specifications of shipboard equipments for the commercial and military vessels(Dual-Use). In this study, vibration and shock test standards for the commercial and military vessels will be compared and reviewed technically.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권1호
• /
• pp.45-54
• /
• 2017

The purpose of this study is to evaluate various means of wind power turbines installation in the Korean west-south wind farm (Test bed 100 MW, Demonstrate site 400 MW). We presented the marine environment of the southwest offshore wind farm in order to decide the appropriate installation vessel to be used in this site. The various vessels would be WTIV (Wind turbine installation vessel), jack-up barge, or floating crane ${\cdots}$ etc. We analyzed the installation cost of offshore wind turbine and the transportation duration for each vessel. The analysis results showed the most suitable installation means for offshore wind turbine in the Korean west-south wind farm.

• 한국정보통신학회논문지
• /
• 제20권2호
• /
• pp.445-450
• /
• 2016

본 논문은 함정의 형상이 탈자 이후에 함정에 형성되는 수직자화에 미치는 영향에 대해 조사하였다. 선박의 전면 전개도로부터 함정의 형상을 삼각형, 사각형, 원형으로 선택하여 지자계에 의한 수직방향의 유도자화를 FEM 정자장 해석으로 조사하였다. 탈자과정 중에 자화에 의한 자계를 측정하였으며, 탈자 이후 성분분리를 통해 영구자화에 의한 자계의 수평 및 수직성분의 크기를 바이어스 자계의 변화에 따라 조사하였다. 이 실험으로부터 함정의 형상을 고려하는 탈자처리 방법이 필요하며 방법으로 선수와 선미 쪽에 권선 간격을 좁게 하여 함정의 중앙부분보다 비교적 더 큰 자계가 인가되도록 하는 것이 바람직하다는 것을 알았다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.491-500
• /
• 2020

The present study proposes a time domain model for the Vortex-induced Vibration (VIV) simulation of a catenary riser under the combination of the current and oscillatory flow induced by vessel motion. In this model, the hydrodynamic force of VIV comprises excitation force, hydrodynamic damping and added mass, which are taken as functions of the non-dimensional frequency and amplitude ratio. The non-dimensional frequency is related with the response frequency, natural frequency, lock-in range and the fluid velocity. The relatively oscillatory flow induced by vessel motion is taken into account in the fluid velocity. Considering that the added mass coefficient and the non-dimensional frequency can affect each other, an iterative analysis is conducted at each time step to update the added mass coefficient and the natural frequency. This model is in detail validated against the published test models. The results show that the model can reasonably reflect the effect of the added mass coefficient on the VIV, and can well predict the riser's VIV under stationary and oscillatory flow induced by vessel motion. Based on the model, this study carries out the VIV simulation of a catenary riser with harmonic vessel motion. By analyzing the bending moment near the touchdown point, it is found that under the combination of the ocean current and oscillatory flow the vessel motion may decrease the VIV response, while increase the excited frequencies. In addition, the decreasing rate of the VIV under vessel surge is larger than that under vessel heave at small vessel motion velocity, while the situation becomes opposite at large vessel motion velocity.