• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.3
• /
• pp.287-295
• /
• 2002

Statement of Problem. Endodontically treated teeth frequently required posts and cores to provide retention and resistance form for crowns. In spite of excellent mechanical properties of metal post and core, its metallic color can be detected through all ceramic restorations occasionally. To solve esthetic problems of metal post and core zirconia post system has been introduced recently. Purpose. The purpose of this study was to examine the fracture strength and mode of resin root analogs restored with zirconia, gold and titanium posts with resin, ceramic and metal cores after cementation with metal crowns. Materials and methods. To avoid the morphological variations of natural teeth, 40 root analogs were fabricated with composite resin. Forty resin root analogs were randomly assigned to four groups according to post and core materials: Group A: cast gold post and core and complete cast crowns, as control. Group B: titanium posts (Parapost, Coltent/Whaledent Inc., NJ, USA) and composite resin cores. Group C: zirconia posts (Cosmopost, Ivoclar AG, Schaan/Liechtenstein) and composite resin cores Group D: zirconia posts and heat-pressed ceramic cores (IPS Empress Cosmo Ingots, Ivoclar AG) After thermocycling ($5^{\circ}C{\sim}55^{\circ}C$, 30 sec.), cyclic loading was applied at 3mm below the incisal edge on the palatal surfaces at an angle of 135 degree to the long axis (2Hz, 50N, 50000cycles). Fracture strength was measured by universal testing machine (Instron, High Wycombe, UK) and fracture pattern of restored resin root analogs was also evaluated. Results and conclusion. Within the limitations of this study following results were drawn. 1. Resin root analogs restored with zirconia posts and composite resins demonstrated lowest fracture strength among tested groups. 2. There was no significant difference in the fracture strength between zirconia posts and heat pressed glass ceramic cores and cast gold posts and cores 3. The fracture strength of resin root analogs restored with titanium posts and composite resin cores was lower than that of gold posts and cores. 4. The deep oblique fracture lines were dominantly observed in root analogs restored with cast gold post and core and zirconia post and heat-pressed ceramic core groups.

• Science of Emotion and Sensibility
• /
• v.9 no.spc3
• /
• pp.167-177
• /
• 2006

In this study, we developed a tool for measuring user's emotions expressed while using a product in the natural and accessible environment for the design field. Also, using emotional word logging software VideoTAME, we measured a user's emotions expressed while using a product. In the testing module of VideoTAME, participants evaluate their emotional changes through playing and watching the video clips of their performing tasks in the experiment room. In the analyzing module, the researchers replay the results created by participants during the experiment and analyze the results using Microsoft Excel. In this research, we have asked users to examine their emotional changes while watching the recorded video clip of them in the experiment room performing a series of tasks using a cellular phone. In this experiment, there were no big differences in the representative emotions expressed for each characteristics of task. The reason for this can be assumed it is because of the emotional changes occurred while facing specific situations when performing a task rather than the task itself. If more data is collected and concrete statistical analysis is done, it is expected that we can clarify what effect a product's usability has on user's emotions.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.2
• /
• pp.107-115
• /
• 2018

In this study, we tested Japanese trolling lines in the Jeju fishery. This fishery simulates the natural marine environment with many seabed rocks, and has been redesigned and manufactured it to be suitable for the Jeju fishery. In order to ensure that the trolling lines were deployed at the inhabitation depth of hairtails, the conditions required for the fishing gear to reach the target depth were determined for use during the experiment. The experimental test fishing was conducted at the depth of 120 m water in front of Jeju Seongsanpo and in the offshore area of Jeju Hanlim. The fishing gear used in the test fishing is currently used in a variety of field operations in Japan. However, several problems were identified, such as twisting of the line during its deployment and excessive sinking of the main line. The fishing gear was, therefore, redesigned and manufactured to be more suitable for the Jeju fishery environment. For the fishing gear to accurately reach the target depth, depth loggers were installed at the starting point of the main line and at the 250 m and 340 m points of the line. Depth and time were recorded every 10 seconds. According to the daytime positioning of hairtails in the lower water column, the target depth of the fishing gear was set at 100-110 m, which was 10-20 m above the sea floor. At a speed of 1.9 knots and with a 9 kg sinker attached, the main fishing line was deployed and catch yields at depths of 100 m, 150 m and 180 m were recorded and analyzed. When the 180 m main line was fully deployed, the time for the hairtail trolling lines to arrive at the appropriate configuration had to be 5 minutes. At this time, the depth of the fishing gear was 16-23 m above the sea floor, in accordance with the depths at which the hairtails were during the day. In addition, in order to accurately place the fishing gear at the inhabitation water depth of hairtails, the experimental test fishing utilized the results of the depth testing that identified the conditions required for the fishing gear to reach the target depth, and the result was a catch of up to 97 kg a day.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.6
• /
• pp.491-495
• /
• 2004

The existing shattering-resistant sesames had low adaptability and yield potential in Korean environment. Great improvements have been made in these shattering-resistant sesames. We take an optimistic view of success for development of shattering-resistant sesames with high yield potential and superior agronomic characters. This study was carried out to investigate cause of shattering resistance and testing method of effective shattering habit. Shattering-resistant sesames had some specific tissue structures. Shattering resistance of placenta adhesion (PA) sesames was caused by strong seed holding of placenta in capsule, and that of seamless (SL) sesames was caused by nonexistence of seam in capsule. Shattering resistance of indehiscent(ID) sesames resulted because they had thicker mesocarp barrier at the zone of dehiscence compared with that of normal varieties. SL, ID and PA sesames had some variation plants who had high shattering rate. This was judged that evolution direction of these sesames means direction that shattering habit increase. Effective drying method in order to measure shattering resistance was drying condition over 20 days in natural temperature $(20^{\circ}C)$ and 10 days in drying oven $(40^{\circ}C)$.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.4
• /
• pp.38-52
• /
• 2011

Sorption and sequential desorption experiments were conducted for Zn using a natural soil (NS) in background status by aging (1, 30 and 100 days). The sorption isotherm showed that Zn had high sorption capacity but low sorption affinity in NS. Sequential desorption was biphasic with appreciable amount of sorbed Zn residing in the desorption-resistant fraction after several desorption steps. The biphasic desorption behavior of Zn was characterized by a biphasic desorption model that includes a linear term to represent labile or easily-desorbing fraction and a Langmuirian-type term to represent desorption-resistant fraction. The biphasic desorption model indicated that the size of the maximum capacity of desorption-resistant fraction ($q^{irr}_{max}$) increased with aging in NS. Desorption kinetics and desorption-resistance of Zn in the soils collected from mine tailings (MA, MB and MC collected from surface, subsurface soils and mine waste, respectively) were investigated and compared to the bioavailability to earthworm (Eisenia fetida). Desorption kinetic data of Zn were fitted to several desorption kinetic models. The ratio ($q_{e,d}/q_0$) of remaining Zn at desorption equilibrium ($q_{e,d}$) to initial sorbed concentration ($q_0$) was in the range of 0.53~0.90 in the mine tailings which was higher than that in NS, except MA. The sequential desorption from the mine tailings with 0.01M Na$NO_3$ and 0.01M $CaCl_2$ showed that appreciable amounts of Zn are resistant to desorption due to aging or sequestration. The SM&T (Standard Measurements and Testing Programme of European Union) analysis showed that the sum of oxidizable (Step III) and residual (Step IV) fractions of Zn was linearly related with its desorption-resistance ($q^{irr}_{max}$) determined by the sequential desorption with 0.01M Na$NO_3$ ($R^2$= 0.9998) and 0.01M $CaCl_2$ ($R^2$= 0.8580). The earthworm uptake of Zn and the desorbed amount of Zn ($q_{desorbed}$ = $q_0-q_{e,d}$) in MB soil were also linearly related ($R^2$ = 0.899). Our results implicate that the ecological risk assessment of heavy metals would be possible considering the relation between desorption behaviors and bioavailability to earthworm.

• Journal of Energy Engineering
• /
• v.18 no.1
• /
• pp.49-55
• /
• 2009

Occurrence of hydrogen embrittlement could be one of the main obstacles for using structural equipment under hydrogen environment. It is required to develop assessment methods of hydrogen embrittlement for the metals used in production, storage, transmission and application utilities of hydrogen. The most probable method of hydrogen mass transmission is using existing natural gas pipeline. Base or weld part of the pipeline can be damaged by mixed gas of hydrogen in the pipeline. In this study small punch (SP) testing was employed to evaluate the hydrogen embrittlement behavior for a line pipe steel (API X65) with electrochemically hydrogen charged specimens. Results showed that the SP test can be a good candidate test method for hydrogen damage evaluation method. Strength of steel is known to be decreased with the level of hydrogen charging. However, for API X65 steel base metal need in this study, the effect of hydrogen to strength was not significant. It can be negligible regardless of the hydrogen contents in the steel. With this test different strength levels with various hydrogen charging conditions were observed. It can also be anticipated that more sensitive evaluation of material behavior be obtainable by the SP test method.

• Cartoon and Animation Studies
• /
• s.44
• /
• pp.33-56
• /
• 2016

As the rapid extension of the game and film industry, studies on developing natural movements on a 3D characters are increasing. Rigging a character with joints is essential to create realistic movements on a 3D character. The rapid development of the CG industry, rigging technologies and workflow is becoming more sophisticated. Despite the progress and the growth of rigging operations, has shown the limitations of such repetitive tasks. For this study, analyzes the issues and inefficiency of the old method of skin weights and propose a better approach. First, need to understand the general process of an animation pipeline and learn the technology term of skin weights. Second, comparing the traditional ways of skinning a character and applying other deformers to work properly. Third, testing out new ways of weighting a character by applying deformers such as lattice and finally converting lattice weights back to skin weights. Forth, verifying effectiveness of the new method of skin weights by comparing with the traditional skin weighting process. The study shows that the new method of skin weights, reduced working hours and a better final weighting outcome. Expecting this study to enhance the method of skin weights and able to utilize this new skinning technology.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.5
• /
• pp.129-137
• /
• 2007

It is very urgent to research the proper recycling method of marine dredged soil as construction material for environmental conservation. Couple of developed countries have been lots of related researches on recycling of marine dredged soil for marine environmental conservation. This is highly imperative in our country. A small-scaled model test for underground pipe has been conducted on the use of controlled low strength materials with marine dredged soil. The flexible pipe, which is called PVC, was used. Four different testing materials, such as natural sand, insitu-soil, sand-CLSM with marine dredged soil and insitu-soil CLSM with marine dredged soil, were used. The vertical and lateral displacement of pipe with CLSM is one tenth of common granular materials. Also, the use of CSLM showed lower lateral and vertical pressure than that of common granular materials. The main reason is the effect of cement hardening of CLSM. This could increase of the stiffness of pipe with backfill materials. In this study, the data presented show that marine dredged soil and in-situ soil can be successfully used in CLSM and reduce the deformation and earth pressure on flexible pipe.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.5
• /
• pp.79-88
• /
• 2007

This study evaluated the statistical stationarity of rainfall quantiles as well as the rainfall itself. The conventional methodologies like the Cox-Stuart test for trend and Dickey-Fuller test for a unit root used for testing the stationarity of a time series were applied and evaluated their application to the rainfall quantiles. As results, first, no obvious increasing or decreasing trend was found for the rainfall in Seoul, which was also found to be a stationary time series based on the Dickey-Fuller test. However, the Cox-Stuart test for the rainfall quantiles show some trends but not in consistent ways of increasing or decreasing. Also, the Dickey-Fuller test for a unit root shows that the rainfall quantiles are non-stationary. This result is mainly due to the difference between the rainfall data and rainfall quantiles. That is, the rainfall is a random variable without any trend or non-stationarity. On the other hand, the rainfall quantiles are estimated by considering all the data to result in high correlation between their consecutive estimates. That is, as the rainfall quantiles are estimated by adding a stationary rainfall data continuously, it becomes possible for their consecutive estimates to become highly correlated. Thus, it is natural for the rainfall quantiles to be decided non-stationary if considering the methodology used in this study.

• Conservation Science in Museum
• /
• v.17
• /
• pp.101-116
• /
• 2016

Ceramic cultural artifacts restored with gypsum-based materials are prone to decay over time due to gypsum's natural absorption and release of atmospheric moisture, often leading to distortion and peeling of painted layers. This study proposes a new restoration material which utilizes extra hard stone, significantly superior in strength to regular gypsum. In order to enhance its physical properties and make it suitable for restoration of ceramics, extra hard stone is mixed with metakaolin. This mixture far surpasses regular gypsum in compressive strength(119MPa vs. 26MPa) while also maintaining a much lower wear rate(0.88% vs. 2.53%). Furthermore, the water absorption rate(2.9%) of the mixed material is over five times lower than that of regular gypsum(17.2%). When examined using a SEM(Scanning Electron Microscope), this mixture also proved superior to extra hard stone in terms of hardened density. The addition of metakaolin increases the mixture's strength and water resistance over that of extra hard stone and also improves its surface density, making it ideal for the restoration of ceramics. It has already been used to repair ceramic objects in the Museum's collection: Clay basin(sinan 18892), Buncheong ware bottle with incised peony design(jubsu 2034), Buncheong ware bowl with chrysanthemum(jubsu 1730). Results thus far have shown the mixture to be easy to inject and layer as well as harden into an even surface, which allows for smooth application of paint for color matching.